References
- Akbarnezhad, A., K. C. G. Ong, M. H. Zhang, C. T. Tam, and T. W. J. Foo. 2011. “Microwave-assisted Beneficiation of Recycled Concrete Aggregates.” Construction and Building Materials 25 (8): 3469–3479. doi:https://doi.org/10.1016/j.conbuildmat.2011.03.038.
- Andreu, G., and E. Miren. 2014. “Experimental Analysis of Properties of High Performance Recycled Aggregate Concrete.” Construction and Building Materials 52: 227–235. doi:https://doi.org/10.1016/j.conbuildmat.2013.11.054.
- Asgari, A., T. Ghorbanian, N. Yousefi, D. Dadashzadeh, F. Khalili, A. Bagheri, and A. H. Mahvi. 2017. “Quality and Quantity of Construction and Demolition Waste in Tehran.” Journal of Environmental Health Science & Engineering 15 (1): 14. doi:https://doi.org/10.1186/s40201-017-0276-0.
- ASTM. 2012. “ASTM C1202: Standard Test Method for Electrical Indication of Concrete’s Ability to Resist Chloride Ion Penetration.” ASTM International West Conshohocken, PA, USA.
- ASTM, C. 2004. “1585-04. Standard Test Method for Measurement of Rate of Absorption of Water by Hydraulic-cement Concretes.” ASTM International.
- ASTM, C. 2006. “642, Standard Test Method for Density, Absorption, and Voids in Hardened Concrete.” Annual Book of ASTM Standards 4: 2.
- Bertos, M. F., S. Simons, C. D. Hills, and P. J. Carey. 2004. “A Review of Accelerated Carbonation Technology in the Treatment of Cement-based Materials and Sequestration of CO2.” Journal of Hazardous Materials 112 (3): 193–205. doi:https://doi.org/10.1016/j.jhazmat.2004.04.019.
- Dilbas, H., M. Şimşek, and Ö. Çakır. 2014. “An Investigation on Mechanical and Physical Properties of Recycled Aggregate Concrete (RAC) with and without Silica Fume.” Construction and Building Materials 61: 50–59. doi:https://doi.org/10.1016/j.conbuildmat.2014.02.057.
- I.S. 383. 1970. “Specification for Coarse and Fine Aggregates from Natural Sources for Concrete.” New Delhi: Bureau of Indian Standards.
- I.S. 516. 1959. “Indian Standard Methods of Tests for Strength of Concrete.” Bureau of Indian Standards.
- I.S. 5816. 1999. “Splitting Tensile Strength of Concrete–method of Test.” New Delhi: Bureau of Indian Standards.
- I.S. 8112. 1989. “43 Grade Ordinary Portland Cement–Specification.” New Delhi: Bureau of Indian Standards.
- IS. 10262. 2009. “Indian Standard Code for Concrete Mix Proportioning Guidelines (First Revision).” New Delhi: Bureau of Indian Standards .
- Katz, A. 2004. “Treatments for the Improvement of Recycled Aggregate.” Journal of Materials in Civil Engineering 16 (6): 597–603. doi:https://doi.org/10.1061/(ASCE)0899-1561(2004)16:6(597).
- Kou, S.-C., C.-S. Poon, and H.-W. Wan. 2012. “Properties of Concrete Prepared with Low-grade Recycled Aggregates.” Construction and Building Materials 36: 881–889. doi:https://doi.org/10.1016/j.conbuildmat.2012.06.060.
- Kou, S.-C., B. Zhan, and C.-S. Poon. 2014. “Use of a CO2 Curing Step to Improve the Properties of Concrete Prepared with Recycled Aggregates.” Cement and Concrete Composites 45: 22–28. doi:https://doi.org/10.1016/j.cemconcomp.2013.09.008.
- Li, Q. Y., H. Z. Quan, and Y. Qin. 2010. Performance and Application Technology of Recycled Concrete, 167–168. Beijing, China: China Building Materials Press.
- Lima, C., A. Caggiano, C. Faella, E. Martinelli, M. Pepe, and R. Realfonzo. 2013. “Physical Properties and Mechanical Behaviour of Concrete Made with Recycled Aggregates and Fly Ash.” Construction and Building Materials 47: 547–559. doi:https://doi.org/10.1016/j.conbuildmat.2013.04.051.
- Morandeau, A., M. Thiery, and P. Dangla. 2014. “Investigation of the Carbonation Mechanism of CH and CSH in Terms of Kinetics, Microstructure Changes and Moisture Properties.” Cement and Concrete Research 56: 153–170. doi:https://doi.org/10.1016/j.cemconres.2013.11.015.
- Nagataki, S., A. Gokce, T. Saeki, and M. Hisada. 2004. “Assessment of Recycling Process Induced Damage Sensitivity of Recycled Concrete Aggregates.” Cement and Concrete Research 34 (6): 965–971. doi:https://doi.org/10.1016/j.cemconres.2003.11.008.
- Ozbakkaloglu, T., A. Gholampour, and T. Xie. 2017. “Mechanical and Durability Properties of Recycled Aggregate Concrete: Effect of Recycled Aggregate Properties and Content.” Journal of Materials in Civil Engineering 30 (2): 4017275. doi:https://doi.org/10.1061/(ASCE)MT.1943-5533.0002142.
- Pade, C., and M. Guimaraes. 2007. “The CO2 Uptake of Concrete in a 100 Year Perspective.” Cement and Concrete Research 37 (9): 1348–1356. doi:https://doi.org/10.1016/j.cemconres.2007.06.009.
- Park, J., J. Lee, C.-W. Chung, S. Wang, and M. Lee. 2020. “Accelerated Carbonation of Recycled Aggregates Using the Pressurized Supercritical Carbon Dioxide Sparging Process.” Minerals 10 (6): 486. doi:https://doi.org/10.3390/min10060486.
- Poon, C. S., Z. H. Shui, L. Lam, H. Fok, and S. C. Kou. 2004. “Influence of Moisture States of Natural and Recycled Aggregates on the Slump and Compressive Strength of Concrete.” Cement and Concrete Research 34 (1): 31–36. doi:https://doi.org/10.1016/S0008-8846(03)00186-8.
- Quattrone, M., S. C. Angulo, and V. M. John. 2014. “Energy and CO2 from High Performance Recycled Aggregate Production.” Resources, Conservation and Recycling 90: 21–33. doi:https://doi.org/10.1016/j.resconrec.2014.06.003.
- Rahal, K. 2007. “Mechanical Properties of Concrete with Recycled Coarse Aggregate.” Building and Environment 42 (1): 407–415. doi:https://doi.org/10.1016/j.buildenv.2005.07.033.
- Shayan, A., and A. Xu. 2003. “Performance and Properties of Structural Concrete Made with Recycled Concrete Aggregate.” Materials Journal 100 (5): 371–380.
- Surya, M., K. R. VVL, and P. Lakshmy. 2013. “Recycled Aggregate Concrete for Transportation Infrastructure.” Procedia-Social and Behavioral Sciences 104: 1158–1167. doi:https://doi.org/10.1016/j.sbspro.2013.11.212.
- Tam, V. W. Y., A. Butera, and K. N. Le. 2016. “Carbon-conditioned Recycled Aggregate in Concrete Production.” Journal of Cleaner Production 133: 672–680. doi:https://doi.org/10.1016/j.jclepro.2016.06.007.
- Tam, V. W. Y., C. M. Tam, and K. N. Le. 2007. “Removal of Cement Mortar Remains from Recycled Aggregate Using Pre-soaking Approaches.” Resources, Conservation and Recycling 50 (1): 82–101. doi:https://doi.org/10.1016/j.resconrec.2006.05.012.
- Tangchirapat, W., R. Buranasing, C. Jaturapitakkul, and P. Chindaprasirt. 2008. “Influence of Rice Husk–bark Ash on Mechanical Properties of Concrete Containing High Amount of Recycled Aggregates.” Construction and Building Materials 22 (8): 1812–1819. doi:https://doi.org/10.1016/j.conbuildmat.2007.05.004.
- Thiery, M., P. Dangla, P. Belin, G. Habert, and N. Roussel. 2013. “Carbonation Kinetics of a Bed of Recycled Concrete Aggregates: A Laboratory Study on Model Materials.” Cement and Concrete Research 46: 50–65. doi:https://doi.org/10.1016/j.cemconres.2013.01.005.
- Thomas, J., N. N. Thaickavil, and P. M. Wilson. 2018. “Strength and Durability of Concrete Containing Recycled Concrete Aggregates.” Journal of Building Engineering 19: 349–365. doi:https://doi.org/10.1016/j.jobe.2018.05.007.
- Xuan, D., B. Zhan, and C. S. Poon. 2016. “Assessment of Mechanical Properties of Concrete Incorporating Carbonated Recycled Concrete Aggregates.” Cement and Concrete Composites 65: 67–74. doi:https://doi.org/10.1016/j.cemconcomp.2015.10.018.
- Zhan, B., C. S. Poon, Q. Liu, S. Kou, and C. Shi. 2014. “Experimental Study on CO2 Curing for Enhancement of Recycled Aggregate Properties.” Construction and Building Materials 67: 3–7. doi:https://doi.org/10.1016/j.conbuildmat.2013.09.008.
- Zhang, J., C. Shi, Y. Li, X. Pan, C.-S. Poon, and Z. Xie. 2015. “Performance Enhancement of Recycled Concrete Aggregates through Carbonation.” Journal of Materials in Civil Engineering 27 (11): 4015029. doi:https://doi.org/10.1061/(ASCE)MT.1943-5533.0001296.
- Zhao, Z., S. Remond, D. Damidot, L. Courard, and F. Michel. 2018. “Improving the Properties of Recycled Concrete Aggregates by Accelerated Carbonation.” Proceedings of the Institution of Civil Engineers - Construction Materials 171 (3): 3, 126–132. doi:https://doi.org/10.1680/jcoma.17.00015.