References
- Agus, A. 2005. “The Structural Linkages between TQM, Product Quality Performance, and Business Performance: Preliminary Empirical Study in Electronics Companies.” Singapore Management Review 27 (1): 87–105.
- Ahluwalia, P. K., and A. K. Nema. 2007. “A Life Cycle Based Multi-objective Optimization Model for the Management of Computer Waste.” Resources, Conservation and Recycling 51 (4): 792–826. doi:https://doi.org/10.1016/j.resconrec.2007.01.001.
- Ahmad, S., K. Y. Wong, M. L. Tseng,and, and W. P. Wong. 2018. “Sustainable Product Design and Development: A Review of Tools, Applications and Research Prospects.” Resources, Conservation and Recycling 132: 49–61. doi:https://doi.org/10.1016/j.resconrec.2018.01.020.
- Andrae, A., M. Xia, J. Zhang, and X. Tang. 2016. “Practical Eco-Design and Eco-Innovation of Consumer Electronics—the Case of Mobile Phones.” Challenges 7 (1): 3. doi:https://doi.org/10.3390/challe7010003.
- Andrae, A. S. G., and O. Andersen. 2010. “Life Cycle Assessments of Consumer Electronics - Are They Consistent?” The International Journal of Life Cycle Assessment 15 (8): 827–836. doi:https://doi.org/10.1007/s11367-010-0206-1.
- Andrae, A. S. G., G. Zou, and J. Liu. 2004. “LCA of Electronic Products.” The International Journal of Life Cycle Assessment 9 (1): 45–52. doi:https://doi.org/10.1007/BF02978535.
- Badurdeen, F., R. Aydin, and A. Brown. 2018. “A Multiple Lifecycle-based Approach to Sustainable Product Configuration Design.” Journal of Cleaner Production 200: pp.756–769. doi:https://doi.org/10.1016/j.jclepro.2018.07.317.
- Bennett, D. 2014. “Future Challenges for Manufacturing.” Journal of Manufacturing Technology Management 25 (1): 2–6. doi:https://doi.org/10.1108/JMTM-10-2013-0153.
- Bereketli, I., M. E. Genevois, and H. Ziya Ulukan. 2009. “Green Product Design for Mobile Phones.” World Academy of Science, Engineering and Technology 58 (10): 213–217.
- Cao, H. J., F. Liu, C. B. Li, and C. Liu. 2006. “An Integrated Method for Product Material Selection considering Environmental Factors and a Case Study.” Materials Science Forum 532–533: 1032–1035. doi:10.4028/www.scientific.net/MSF.532-533.1032.
- Chan, J. W., and T. K. Tong. 2007. “Multi-criteria Material Selections and End-of-life Product Strategy: Grey Relational Analysis Approach.” Materials & Design 28 (5): 1539–1546. doi:https://doi.org/10.1016/j.matdes.2006.02.016.
- Chang, D., C. K. M. Lee, and C. H. Chen. 2014. “Review of Life Cycle Assessment Towards Sustainable Product Development.” Journal of Cleaner Production 83: 48–60. doi:https://doi.org/10.1016/j.jclepro.2014.07.050.
- Chiang, S. Y., C. C. Wei, T. H. Chiang, and W. L. Chen. 2011. “How Can Electronics Industries Become Green Manufacturers in Taiwan and Japan.” Clean Technologies and Environmental Policy 13 (1): 37–47. doi:https://doi.org/10.1007/s10098-010-0284-6.
- Chiu, M.-C., and C.-H. Chu. 2012. “Review of Sustainable Product Design from Life Cycle Perspectives.” International Journal of Precision Engineering and Manufacturing 13 (7): 1259–1272. doi:https://doi.org/10.1007/s12541-012-0169-1.
- Cockerill, K. 2004. “Discussions on Sustainability.” Clean Technologies and Environmental Policy 6 (3): 151–152. doi:https://doi.org/10.1007/s10098-004-0253-z.
- Culaba, A. B., and M. R. I. Purvis. 1999. “A Methodology for the Life Cycle and Sustainability Analysis of Manufacturing Processes.” Journal of Cleaner Production 7 (6): 435–445. doi:https://doi.org/10.1016/S0959-6526(99)00231-0.
- De Silva, N., I. S. Jawahir, J. O. Dillon, and M. Russell. 2009. “A New Comprehensive Methodology for the Evaluation of Product Sustainability at the Design and Development Stage of Consumer Electronic Products.” International Journal of Sustainable Manufacturing 1 (3): 251–264. doi:https://doi.org/10.1504/IJSM.2009.023973.
- Deng, L., C. W. Babbitt, and E. D. Williams. 2011. “Economic-balance Hybrid LCA Extended with Uncertainty Analysis: Case Study of a Laptop Computer.” Journal of Cleaner Production 19 (11): 1198–1206. doi:https://doi.org/10.1016/j.jclepro.2011.03.004.
- Dewey, A., and A. Drahota. 2016. “Introduction to Systematic Reviews: Online Learning Module Cochrane Training” https://training.cochrane.org/interactivelearning/module-1-introduction-conducting-systematic-reviews
- Duan, H., M. Eugster, R. Hischier, M. Streicher-Porte, and J. Li. 2009. “Life Cycle Assessment Study of a Chinese Desktop Personal Computer.” Science of the Total Environment 407 (5): 1755–1764. doi:https://doi.org/10.1016/j.scitotenv.2008.10.063.
- Elduque, D., C. Javierre, C. Pina, E. Martínez, and E. Jiménez. 2014. “Life Cycle Assessment of a Domestic Induction Hob: Electronic Boards.” Journal of Cleaner Production 76: 74–84. doi:https://doi.org/10.1016/j.jclepro.2014.04.009.
- Esmaeilian, B., S. Behdad, and B. Wang. 2016. “The Evolution and Future of Manufacturing: A Review.” Journal of Manufacturing Systems 39: 79–100. doi:https://doi.org/10.1016/j.jmsy.2016.03.001.
- Franke, C., B. Basdere, M. Ciupek, and S. Seliger. 2006. “Remanufacturing of Mobile Phones-capacity, Program and Facility Adaptation Planning.” Omega 34 (6): 562–570. doi:https://doi.org/10.1016/j.omega.2005.01.016.
- Govindan, K., D. Kannan, K. Mathiyazhagan, A. B. L. D. S. Jabbour, and C. J. C. Jabbour. 2013. “Analysing Green Supply Chain Management Practices in Brazil’s Electrical/electronics Industry Using Interpretive Structural Modelling.” International Journal of EnvironmentalStudies 70 (4): 477–493. doi:https://doi.org/10.1080/00207233.2013.798494.
- Gurauskienė, I., and V. Varžinskas. 2006. “Eco-design Methodology for Electrical and Electronic Equipment Industry.” Environmental Research, Engineering and Management 3: 43–51.
- Haapala, K. R., F. Zhao, J. Camelio, J. W. Sutherland, S. J. Skerlos, D. A. Dornfeld, I. S. Jawahir, A. F. Clarens, and J. L. Rickli. 2013. “A Review of Engineering Research in Sustainable Manufacturing.” Journal of Manufacturing Science and Engineering 135 (4): 041013. doi:https://doi.org/10.1115/1.4024040.
- Hankammer, S., R. Jiang, R. Kleer, and M. Schymanietz. 2018. “Are Modular and Customizable Smartphones the Future, or Doomed to Fail? A Case Study on the Introduction of Sustainable Consumer Electronics.” CIRP Journal of Manufacturing Science and Technology 23: 146–155. doi:https://doi.org/10.1016/j.cirpj.2017.11.001.
- Hassan, M. F., M. H. Mat Shah, M. Z. Yunos, S. Adzila, A. M. T. Arifin, M. N. Abdol Rahman, and R. H. Abdul Haq. 2016. “Integration of ECQFD in Conceptual Design Activities for Enabling Environmentally Conscious Design.” ARPN Journal of Engineering and Applied Sciences 11 (4): 2489–2495.
- Iakovou, E., N. Moussiopoulos, A. Xanthopoulos, C. Achillas, N. Michailidis, M. Chatzipanagioti, C. Koroneos, K. D. Bouzakis, and V. Kikis. 2009. “A Methodological Framework for End-of-life Management of Electronic Products.” Resources, Conservation and Recycling 53 (6): 329–339. doi:https://doi.org/10.1016/j.resconrec.2009.02.001.
- Ilbahar, E., S. Cebi, and C. Kahraman. 2020. “Classification of Laptop Design Attributes Using Fuzzy Kano Model.” In Customer Oriented Product Design, edited by C. Kahraman and S. Cebi, 239–250. Springer: Cham. doi:https://doi.org/10.1007/978-3-030-42188-5_13
- Ilgin, M. A., S. M. Gupta, and O. Battaïa. 2015. “Use of MCDM Techniques in Environmentally Conscious Manufacturing and Product Recovery: State of the Art.” Journal of Manufacturing Systems 37: 746–758. doi:https://doi.org/10.1016/j.jmsy.2015.04.010.
- Irimia-Vladu, M. 2014. ““Green” Electronics: Biodegradable and Biocompatible Materials and Devices for Sustainable Future.” Chemical Society Reviews 43 (2): 588–610. doi:https://doi.org/10.1039/C3CS60235D.
- Jafari, A., J. Heydari, and A. Keramati. 2017. “Factors Affecting Incentive Dependency of Residents to Participate in E-waste Recycling: A Case Study on Adoption of E-waste Reverse Supply Chain in Iran.” Environment, Development and Sustainability 19 (1): 325–338. doi:https://doi.org/10.1007/s10668-015-9737-8.
- Jahan, A., M. Y. Ismail, S. M. Sapuan, and F. Mustapha. 2010. “Material Screening and Choosing Methods - A Review.” Materials & Design 31 (2): 696–705. doi:https://doi.org/10.1016/j.matdes.2009.08.013.
- Jayal, A. D., F. Badurdeen, O. W. Dillon, and I. S. Jawahir. 2010. “Sustainable Manufacturing: Modeling and Optimization Challenges at the Product, Process and System Levels.” CIRP Journal of Manufacturing Science and Technology 2 (3): 144–152. doi:https://doi.org/10.1016/j.cirpj.2010.03.006.
- Kaebernick, H., S. Kara,and, and M. Sun. 2003. “Sustainable Product Development and Manufacturing by considering Environmental Requirements.” Robotics and Computer-Integrated Manufacturing 19 (6): 461–468. doi:https://doi.org/10.1016/S0736-5845(03)00056-5.
- Khan, S. A. R., D. Qianli, W. SongBo, K. Zaman, and Y. Zhang. 2017. “Environmental Logistics Performance Indicators Affecting per Capita Income and Sectoral Growth: Evidence from a Panel of Selected Global Ranked Logistics Countries.” Environmental Science and Pollution Research 24 (2): 1518–1531. doi:https://doi.org/10.1007/s11356-016-7916-2.
- Khan, S. A. R., A. Sharif, H. Golpîra, and A. Kumar. 2019. “A Green Ideology in Asian Emerging Economies: From Environmental Policy and Sustainable Development.” Sustainable Development 27 (6): 1063–1075. doi:https://doi.org/10.1002/sd.1958.
- Khan, S. A. R., Y. Zhang, M. Anees, H. Golpîra, A. Lahmar, and D. Qianli. 2018a. “Green Supply Chain Management, Economic Growth and Environment: A GMM Based Evidence.” Journal of Cleaner Production 185: 588–599. doi:https://doi.org/10.1016/j.jclepro.2018.02.226.
- Khan, S. A. R., Y. Zhang, H. Golpîra, and Q. Dong. 2018b. “The Impact of Green Supply Chain Practices in Business Performance: Evidence from Pakistani FMCG Firms.” Journal of Advanced Manufacturing Systems 17 (2): 267–275. doi:https://doi.org/10.1142/S0219686718500166.
- Kumar, A., S. Choudhary, J. A. Garza-Reyes, V. Kumar, S. R. A. Khan, and N. Mishra. 2020. “Analysis of Critical Success Factors for Implementing Industry 4.0 Integrated Circular Supply chain–Moving Towards Sustainable Operations.” Production Planning and Control.
- Lee, A. H. I., and C.-Y. Lin. 2011. “An Integrated Fuzzy QFD Framework for New Product Development.” Flexible Services and Manufacturing Journal 23 (1): 26–47. doi:https://doi.org/10.1007/s10696-011-9076-5.
- Li, B., J. Yang, B. Lu, and X. Song. 2015. “Estimation of Retired Mobile Phones Generation in China: A Comparative Study on Methodology.” Waste Management 35: 247–254. doi:https://doi.org/10.1016/j.wasman.2014.09.008.
- Li, G. D., D. Yamaguchi, and M. Nagai. 2007. “A Grey-based Decision-making Approach to the Supplier Selection Problem.” Mathematical and Computer Modelling 46 (3–4): 573–581. doi:https://doi.org/10.1016/j.mcm.2006.11.021.
- Li, J., X. Zeng, and A. Stevels. 2015. “Ecodesign in Consumer Electronics: Past, Present, and Future.” Critical Reviews in Environmental Science and Technology 45 (8): 840–860. doi:https://doi.org/10.1080/10643389.2014.900245.
- Lin, M., C. Tsai, C. Cheng, and C. A. Chang. 2004. “Using Fuzzy QFD for Design of Low-end Digital Camera.” International Journal of Applied Science and Engineering 2 (3): 222–233.
- Lin, Y. C., H. H. Lai, and C. H. Yeh. 2007. “Consumer-oriented Product Form Design Based on Fuzzy Logic: A Case Study of Mobile Phones.” International Journal of Industrial Ergonomics 37 (6): 531–543. doi:https://doi.org/10.1016/j.ergon.2007.03.003.
- Liu, J., C. Yang, H. Wu, Z. Lin, Z. Zhang, R. Wang, B. Li, F. Kang, L. Shi, and C. P. Wong. 2014. “Future Paper Based Printed Circuit Boards for Green Electronics: Fabrication and Life Cycle Assessment.” Energy & Environmental Science 7 (11): 3674–3682. doi:https://doi.org/10.1039/C4EE01995D.
- Liu, X., M. Tanaka, and Y. Matsui. 2009. “Economic Evaluation of Optional Recycling Processes for Waste Electronic Home Appliances.” Journal of Cleaner Production 17 (1): 53–60. doi:https://doi.org/10.1016/j.jclepro.2008.03.005.
- Ljungberg, L. Y. 2007. “Materials Selection and Design for Development of Sustainable Products.” Materials & Design 28 (2): 466–479. doi:https://doi.org/10.1016/j.matdes.2005.09.006.
- MacK, C. A. 2011. “Fifty Years of Moore’s Law.” IEEE Transactions on Semiconductor Manufacturing 24 (2): 202–207. doi:https://doi.org/10.1109/TSM.2010.2096437.
- Malek, J., and T. N. Desai. 2019. “Prioritization of Sustainable Manufacturing Barriers Using Best Worst Method.” Journal of Cleaner Production 226: 589–600. doi:https://doi.org/10.1016/j.jclepro.2019.04.056.
- Manjunatheshwara, K. J., and S. Vinodh. 2018. “Grey-based Decision-making Method for Sustainable Material Selection of Tablet Device Enclosure.” Clean Technologies and Environmental Policy 1–12. doi:https://doi.org/10.1007/s10098-018-1610-7.
- Masanet, E., and A. Horvath. 2007. “Assessing the Benefits of Design for Recycling for Plastics in Electronics: A Case Study of Computer Enclosures.” Materials & Design 28 (6): 1801–1811. doi:https://doi.org/10.1016/j.matdes.2006.04.022.
- Masui, K., T. Sakao, M. Kobayashi, and A. Inaba. 2003. “Applying Quality Function Deployment to Environmentally Conscious Design.” International Journal of Quality & Reliability Management 20 (1): 90–106. doi:https://doi.org/10.1108/02656710310453836.
- Mathiyazhagan, K., S. Sengupta, and D. Mathivathanan. 2019. “Challenges for Implementing Green Concept in Sustainable Manufacturing: A Systematic Review.” Opsearch 56 (1): 32–72. doi:https://doi.org/10.1007/s12597-019-00359-2.
- Meyer, D. E., and J. P. Katz. 2016. “Analyzing the Environmental Impacts of Laptop Enclosures Using Screening-level Life Cycle Assessment to Support Sustainable Consumer Electronics.” Journal of Cleaner Production 112: 369–383. doi:https://doi.org/10.1016/j.jclepro.2015.05.143.
- Mittal, V. K., and K. S. Sangwan. 2014. “Development of a Model of Barriers to Environmentally Conscious Manufacturing Implementation.” International Journal of Production Research 52 (2): 584–594. doi:https://doi.org/10.1080/00207543.2013.838649.
- Moberg, Å., C. Borggren, C. Ambell, G. Finnveden, F. Guldbrandsson, A. Bondesson, J. Malmodin, and P. Bergmark. 2014. “Simplifying a Life Cycle Assessment of a Mobile Phone.” The International Journal of Life Cycle Assessment 19 (5): 979–993. doi:https://doi.org/10.1007/s11367-014-0721-6.
- Nnorom, I. C., J. Ohakwe, and O. Osibanjo. 2009. “Survey of Willingness of Residents to Participate in Electronic Waste Recycling in Nigeria - A Case Study of Mobile Phone Recycling.” Journal of Cleaner Production 17 (18): 1629–1637. doi:https://doi.org/10.1016/j.jclepro.2009.08.009.
- Noon, M. S., S. J. Lee, and J. S. Cooper. 2011. “A Life Cycle Assessment of End-of-life Computer Monitor Management in the Seattle Metropolitan Region.” Resources, Conservation and Recycling 57: 22–29. doi:https://doi.org/10.1016/j.resconrec.2011.09.017.
- Ocampo, L., and E. Clark. 2015. “An Analytic Hierarchy Process (Ahp) Approach in the Selection of Sustainable Manufacturing Initiatives: A Case in a Semiconductor Manufacturing Firm in the Philippines.” International Journal of the Analytic Hierarchy Process 7 (1): 32–49. doi:https://doi.org/10.13033/ijahp.v7i1.223.
- Osibanjo, O., and I. C. Nnorom. 2008. “Material Flows of Mobile Phones and Accessories in Nigeria: Environmental Implications and Sound End-of-life Management Options.” Environmental Impact Assessment Review 28 (2–3): 198–213. doi:https://doi.org/10.1016/j.eiar.2007.06.002.
- Rahmani, M., R. Nabizadeh, K. Yaghmaeian, A. H. Mahvi, and M. Yunesian. 2014. “Estimation of Waste from Computers and Mobile Phones in Iran.” Resources, Conservation and Recycling 87: 21–29. doi:https://doi.org/10.1016/j.resconrec.2014.03.009.
- Sakao, T. 2007. “A QFD-centred Design Methodology for Environmentally Conscious Product Design.” International Journal of Production Research 45 (18–19): 4143–4162. doi:https://doi.org/10.1080/00207540701450179.
- Seker, S. 2020. “Fuzzy Quality Function Deployment Method for Smart Phone Product Design.” In Customer Oriented Product Design, edited by C. Kahraman and S. Cebi, 57–71. Springer: Cham.
- Seliger, G., C. Franke, M. Ciupek, and B. Başdere. 2004. “Process and Facility Planning for Mobile Phone Remanufacturing.” CIRP Annals - Manufacturing Technology 53 (1): 9–12. doi:https://doi.org/10.1016/S0007-8506(07)60633-7.
- Sellitto, M. A., and F. F. Hermann. 2019. “Influence of Green Practices on Organizational Competitiveness: A Study of the Electrical and Electronics Industry.” Engineering Management Journal 31 (2): 98–112. doi:https://doi.org/10.1080/10429247.2018.1522220.
- Sikdar, S. K. 2007. “Sustainability and Recycle-reuse in Process Systems.” Clean Technologies and Environmental Policy 9 (3): 167–174. doi:https://doi.org/10.1007/s10098-007-0087-6.
- Simiari, Z., M. Shojaee, and P. Oladghaffari. 2018. “E-waste Management and Presentation of a Suitable Approach for Disposal of These Wastes: A Case Study in North of Iran, Nowshahr.” Environment, Development and Sustainability 1–12. doi:https://doi.org/10.1007/s10668-018-0278-9.
- Singh, M. K., H. Kumar, M. P. Gupta, and J. Madaan. 2018a. “A Glimpse of Sustainable Electronics Manufacturing for India: A Study Using PEST-SWOT Analysis.” In Global Value Chains, Flexibility and Sustainability, edited by J. Connell, R. Agarwal, Sushil, and S. Dhir, 271–281. Singapore: Springer.
- Singh, M. K., H. Kumar, M. P. Gupta, and J. Madaan. 2018b. “Competitiveness of Electronics Manufacturing Industry in India: An ISM–fuzzy MICMAC and AHP Approach.” Measuring Business Excellence 22 (1): 88–116. doi:https://doi.org/10.1108/MBE-12-2016-0063.
- Singhal, D., S. Tripathy, and S. K. Jena. 2019. “Sustainability through Remanufacturing of E-waste: Examination of Critical Factors in the Indian Context.” Sustainable Production and Consumption 20: 128–139. doi:https://doi.org/10.1016/j.spc.2019.06.001.
- Socolof, M. L., J. G. Overly, and J. R. Geibig. 2005. “Environmental Life-cycle Impacts of CRT and LCD Desktop Computer Displays.” Journal of Cleaner Production 13 (13–14): 1281–1294. doi:https://doi.org/10.1016/j.jclepro.2005.05.014.
- Subramanian, K., and W. K. Yung. 2017. “Life Cycle Assessment Study of an Integrated Desktop Device-comparison of Two Information and Communication Technologies: Desktop Computers versus All-in-ones.” Journal of Cleaner Production 156: 828–837. doi:https://doi.org/10.1016/j.jclepro.2017.04.089.
- Teehan, P., and M. Kandlikar. 2013. “Comparing Embodied Greenhouse Gas Emissions of Modern Computing and Electronics Products.” Environmental Science & Technology 47 (9): 3997–4003. doi:https://doi.org/10.1021/es303012r.
- Thiriez, A., and T. Gutowski. 2006. “An Environmental Analysis of Injection Molding.” IEEE International Symposium on Electronics and the Environment, 195–200. Scottsdale, AZ, USA. doi: https://doi.org/10.1109/ISEE.2006.1650060.
- Thomas, P. C., 2020, August. 24. “Application of QFD for Disposal of WEEE.”In Emerging Technologies for Sustainability: Proceedings of the Annual International Conference on Emerging Research Areas (AICERA 2019), Kottayam, Kerala: 183. CRC Press.
- Tischner, U., and M. Hora. 2019. “Sustainable Electronic Product Design.” In Waste Electrical and Electronic Equipment (WEEE) Handbook, edited by Vannessa Goodship, Ab Stevels, Jaco Huisman, 443–482. Woodhead Publishing. doi:https://doi.org/10.1016/B978-0-08-102158-3.00017-3
- Tseng, M. L. 2013. “Modeling Sustainable Production Indicators with Linguistic Preferences.” Journal of Cleaner Production 40: 46–56. doi:https://doi.org/10.1016/j.jclepro.2010.11.019.
- Van Erp, R., R. Soleimanzadeh, L. Nela, G. Kampitsis, and E. Matioli. 2020. “Co-designing Electronics with Microfluidics for More Sustainable Cooling.” Nature 585 (7824): 211–216. doi:https://doi.org/10.1038/s41586-020-2666-1.
- Van Heddeghem, W., S. Lambert, B. Lannoo, D. Colle, M. Pickavet, and P. Demeester. 2014. “Trends in Worldwide ICT Electricity Consumption from 2007 to 2012.” Computer Communications 50: 64–76. doi:https://doi.org/10.1016/j.comcom.2014.02.008.
- Vimal, K. E. K., S. Vinodh, and K. Jayakrishna. 2019. “Application of Fuzzy QFD for Improving the Process Sustainability Characteristics: A Case Study.” International Journal of Services and Operations Management 32 (2): 173–201. doi:https://doi.org/10.1504/IJSOM.2019.097528.
- Vinodh, S., K. J. Manjunatheshwara, S. Karthik Sundaram, and V. Kirthivasan. 2017. “Application of Fuzzy Quality Function Deployment for Sustainable Design of Consumer Electronics Products: A Case Study.” Clean Technologies and Environmental Policy 19 (4): 1021–1030. doi:https://doi.org/10.1007/s10098-016-1296-7.
- Wang, X., H. K. Chan, C. K. M. Lee, and D. Li. 2015. “A Hierarchical Model for Eco-design of Consumer Electronic Products.” Technological and Economic Development of Economy 21 (1): 48–64. doi:https://doi.org/10.3846/20294913.2013.876685.
- Wu, B. Y., Y. C. Chan, A. Middendorf, X. Gu, and H. W. Zhong. 2008. “Assessment of Toxicity Potential of Metallic Elements in Discarded Electronics: A Case Study of Mobile Phones in China.” Journal of Environmental Sciences 20 (11): 1403–1408. doi:https://doi.org/10.1016/S1001-0742(08)62240-8.
- Wu, Y.-H., and C. C. Ho. 2015. “Integration of Green Quality Function Deployment and Fuzzy Theory: A Case Study on Green Mobile Phone Design.” Journal of Cleaner Production 108: 271–280. doi:https://doi.org/10.1016/j.jclepro.2015.09.013.
- Yagi, K., and K. Halada. 2001. “Materials Development for a Sustainable Society.” Materials & Design 22 (2): 143–146. doi:https://doi.org/10.1016/S0261-3069(00)00056-X.
- Yin, J., Y. Gao, and H. Xu. 2014. “Survey and Analysis of Consumers’ Behaviour of Waste Mobile Phone Recycling in China.” Journal of Cleaner Production 65: 517–525. doi:https://doi.org/10.1016/j.jclepro.2013.10.006.
- Ylä-Mella, J., R. L. Keiski, and E. Pongrácz. 2015. “Electronic Waste Recovery in Finland: Consumers’ Perceptions Towards Recycling and Re-use of Mobile Phones.” Waste Management 45: 374–384. doi:https://doi.org/10.1016/j.wasman.2015.02.031.
- You, Z., W. Hou, X. Wang, J. Ma, and J. Liu. 2016. “Design Strategies for Developing Sustainable Consumer Electronics.” Journal of Residuals Science & Technology 13: S219–S226.
- Younesi, M., and E. Roghanian. 2015. “A Framework for Sustainable Product Design: A Hybrid Fuzzy Approach Based on Quality Function Deployment for Environment.” Journal of Cleaner Production 108: 385–394. doi:https://doi.org/10.1016/j.jclepro.2015.09.028.
- Yung, W. K. C., H. K. Chan, J. H. T. So, D. W. C. Wong, A. C. K. Choi, and T. M. Yue. 2011. “A Life-cycle Assessment for Eco-redesign of A Consumer Electronic Product.” Journal of Engineering Design 22 (2): 69–85. doi:https://doi.org/10.1080/09544820902916597.
- Zink, T., F. Maker, R. Geyer, R. Amirtharajah, and V. Akella. 2014. “Comparative Life Cycle Assessment of Smartphone Reuse: Repurposing Vs. Refurbishment.” The International Journal of Life Cycle Assessment 19 (5): 1099–1109. doi:https://doi.org/10.1007/s11367-014-0720-7.