References
- Abele, E., R. Anderl, and H., G. Birkhofer. 2005. Environmentally Friendly Product Development: Methods and Tools. ed. London: Springer.
- ABRELPE – Associação Brasileira de Empresas de Limpeza Pública e Resíduos Especiais. 2018. Panorama Dos Resíduos Sólidos No Brasil. São Paulo: ABRELPE Association. ( accessed 13.12.19).
- Ahmad, S., K. Yew Wong, M. L. Tseng, and W. Wai Peng. 2018. “Sustainable Product Design and Development: A Review of Tools, Applications and Research Prospects.” Resources Conservation and Recycling 132: 49–61. doi:https://doi.org/10.1016/j.resconrec.2018.01.020.
- Aslani, F., G. Ma, D.L., Yim Wan, and G. Muselin. 2018. Development of high-performance self-compacting concrete using waste recycled concrete aggregates and rubber granules. Journal of Cleaner Production 182: 553–566.
- Bribián, I. Z., A. V. Capilla, and A. A. Usón. 2011. “Life Cycle Assessment of Building Materials: Comparative Analysis of Energy and Environmental Impacts and Evaluation of the Eco-efficiency Improvement Potential.” Building Environment 46 (5): 1133–1140. doi:https://doi.org/10.1016/j.buildenv.2010.12.002.
- Cachim, P. B. 2009. “Mechanical Properties of Brick Aggregate Concrete.” Construction and Building Materials 23 (3): 1292–1297. doi:https://doi.org/10.1016/j.conbuildmat.2008.07.023.
- Callegaro, A. M., C. S. Caten, R. L. Z. Ten, Tanure, A. S. Buss, M. E. S. Echeveste, and C. F. Jung. 2016. “Managing Requirements for the Development of a Novel Elbow Rehabilitation Device.” Technological Forecasting and Social Change 113: 404–411. doi:https://doi.org/10.1016/j.techfore.2016.07.027.
- Doualle, B., K. Medini, X. Boucher, D. Brissaud, and V. Laforest. 2019. “Selection Method of Sustainable Product-Service System Scenarios to Support Decision-Making During Early Design Stages.” International Journal of Sustainable Engineering. doi:https://doi.org/10.1080/19397038.2019.1660432.
- Eurostat. 2017. Generation of Waste by Waste Category, Hazardousness and NACE Rev 2 Activity. Luxembourg: Publications Office of the European Union.
- Faleschini, F., M. A. Fernandez-Ruíz, M. A. Zanini, K. Brunelli, C. Pellegrino, and H. Hernández-Montes. 2015. “High Performance Concrete With Electric Arc Furnace Slag as Aggregate: Mechanical and Durability Properties.” Construction and Building Materials 101: 113–121. doi:https://doi.org/10.1016/j.conbuildmat.2015.10.022.
- Fořt, J., and R. Černý. 2020. “Transition to Circular Economy in the Construction Industry: Environmental Aspects of Waste Brick Recycling Scenarios.” Waste Management 118: 510–520. doi:https://doi.org/10.1016/j.wasman.2020.09.004.
- Guarnieri, P., and F. Trojan. 2019. “Decision Making on Supplier Selection Based on Social, Ethical, and Environmental Criteria: A Study in the Textile Industry.” Resources, Conservation and Recycling 141: 347–361. doi:https://doi.org/10.1016/j.resconrec.2018.10.023.
- Haiyun, C., H. Zhixiong, S. Yüksel, and H. Dinçer. 2021. “Analysis of the Innovation Strategies for Green Supply Chain Management in the Energy Industry Using the QFD-Based Hybrid Interval Valued Intuitionistic Fuzzy Decision Approach.” Renewable and Sustainable Energy Reviews 143: 110844. doi:https://doi.org/10.1016/j.rser.2021.110844.
- Horckmans, L., P. Nielsen, P. Dierckx, and A. Ducastel. 2019. “Recycling of Refractory Bricks Used in Basic Steelmaking: A Review.” Resources Conservation and Recycling 140: 297–304. doi:https://doi.org/10.1016/j.resconrec.2018.09.025.
- Huang, B., X. Wang, H. Kua, Y. Geng, R. Bleischwitz, and J. Ren. 2018. “Construction and Demolition Waste Management in China Through the 3R Principle.” Resources Conservation and Recycling 129: 36–44. doi:https://doi.org/10.1016/j.resconrec.2017.09.029.
- John, V. M., and R. T. A. Prado. 2010. Selo Casa Azul - Boas Práticas Para Habitação Mais Sustentável. Paginas e Letras., São Paulo.
- Kabirifar, K., M. Mojtahedi, C. Wang, and V. W. Y.Tam. 2020. “Construction and Demolition Waste Management Contributing Factors Coupled With Reduce, Reuse, and Recycle Strategies for Effective Waste Management: A Review”. Journal of Cleaner Production 263: 121265. DOI: https://doi.org/10.1016/j.jclepro.2020.121265.
- Kaebernick, H., S. Kara, and M. Sun. 2003. “Sustainable Product Development and Manufacturing by Considering Environmental Requirements.” Robotics and Computer Integrated Manufacturing 19 (6): 461–468. doi:https://doi.org/10.1016/S0736-5845(03)00056-5.
- Langer, W. 2016. “Sustainability of Aggregates in Construction.” In Sustainability of Construction Materials, 181–207. doi:https://doi.org/10.1016/B978-0-08-100370-1.00009-3
- Meyer, C., 2013. “The Greening of the Concrete Industry.” The 2013 World Congress on Advances in Structural Engineering and Mechanics (ASEM13), Jeju, Korea, September 8- 12.
- Omrane, M., S. Kenai, E.-H. Kadri, and A. Aït-Mokhtar. 2017. “Performance and Durability of Self-Compacting Concrete Using Recycled Concrete Aggregates and Natural Pozzolan.” Journal of Cleaner Production 165: 415–430. doi:https://doi.org/10.1016/j.jclepro.2017.07.139.
- Oppong, S. H. 2013. “The Problem of Sampling in Qualitative Research.” Asian Journal of Management Sciences and Education 2 (2): 202–210.
- Rathod, G., S. Vinodhb, and U. R. Madhyasta. 2011. “Integration of ECQFD and LCA for Enabling Sustainable Product Design in an Electric Vehicle Manufacturing Organisation.” International Journal of Sustainable Engineering 4 (3): 202–214. doi:https://doi.org/10.1080/19397038.2010.547624.
- Rossi, M., A. Papetti, M. Marconi, and M. Germani. 2019. “A Multi-criteria Index to Support Ecodesign Implementation in Manufacturing Products: Benefits and Limits in Real Case Studies.” International Journal of Sustainable Engineering 12 (6): 376–389. doi:https://doi.org/10.1080/19397038.2019.1575926.
- Santos, M. K., A. M. F. Danilevicz, and R. M. C. Tubino. 2017. “Environmental Service Providers Assessment: A Multi-criteria Model Applied to Industrial Waste.” Journal of Cleaner Production 159: 374–387. doi:https://doi.org/10.1016/j.jclepro.2017.05.035.
- Shahin, A., E. Bagheri Iraj, and H. Vaez Shahrestani. 2018. “Developing the C-shaped QFD 3D Matrix for Service Applications with a Case Study in Banking Services.” International Journal of Quality & Reliability Management 35 (1): 109–125. doi:https://doi.org/10.1108/IJQRM-02-2016-0018.
- Vieira, C. S., and P. M. Pereira. 2015. “Use of Recycled Construction and Demolition Materials in Geotechnical Applications: A Review.” Resources Conservation and Recycling 103: 192–204. doi:https://doi.org/10.1016/j.resconrec.2015.07.023.
- Vinodh, S., and K. Jayakrishna. 2014. “Development of Integrated ECQFD, LCA and Sustainable Analysis Model, a Case Study in an Automotive Component Manufacturing Organization.” Journal of Engineering, Design and Technology 12 (1): 102–127. doi:https://doi.org/10.1108/JEDT-07-2011-0052.
- Weiss, M. A. 2017. Global Urban Development: The Porto Alegre Sustainable Innovation Zone (ZISPOA) – Two Years of Accomplishment and Progress. World Urban Campaign Newsletter (UN-Habitat online).
- Weiss, M. A. 2018. Global Urban Development (GUD) in Brazil: The Porto Alegre Sustainable Innovation Zone (ZISPOA) and Urban Thinkers Campus. World Urban Campaign Newsletter (UN-Habitat online).
- Weiss, M. A., and L. F. Nascimento. 2016. “The Rio Grande Do Sul Leapfrog Economic Strategy and the Porto Alegre Sustainable Innovation Zone (ZISPOA).” Policy in Focus 13 (3): 42–45.
- Weiss, M. A., N. J. Sedmak-Weiss, and E. Y. Rodriguez. 2015. 21st Century Leapfrog Economic Strategy: Rio Grande Do Sul Becomes the Most Sustainable and Innovative Place in Latin America by 2030. Porto Alegre: Global Urban Development.
- Wijayasundara, M., P. Mendis, and R. H. Crawford. 2018. “Integrated Assessment of the Use of Recycled Concrete Aggregate Replacing Natural Aggregate in Structural Concrete.” Journal of Cleaner Production 174: 591–604. doi:https://doi.org/10.1016/j.jclepro.2017.10.301.
- Yap, S. P., P. Z. C. Chen, Y. Goh, H. A. Ibrahim, K. H. Mo, and C. W. Yuen. 2018. “Characterization of Pervious Concrete with Blended Natural Aggregate and Recycled Concrete Aggregates.” Journal of Cleaner Production 181: 155–165. doi:https://doi.org/10.1016/j.jclepro.2018.01.205.
- Yazdanbakhsh, A., L. C. Bank, T. Baez, and I. Wernick. 2018. “Comparative LCA of Concrete with Natural and Recycled Coarse Aggregate in the New York City Area.” The International Journal of Life Cycle Assessment 23 (6): 1163–1173. doi:https://doi.org/10.1007/s11367-017-1360-5.
- Yazdani, M., P. Chatterjee, E. K. Zavadskas, and S. Hashemkhani Zolfani. 2017. “Integrated QFD-MCDM Framework for Green Supplier Selection.” Journal of Cleaner Production 142: 3728–3740. doi:https://doi.org/10.1016/j.jclepro.2016.10.095.
- Zhang, L. W., A. O. Sojobi, V. K. R. Kodur, and K. M. Liew. 2019. “Effective Utilization and Recycling of Mixed Recycled Aggregates for a Greener Environment.” Journal of Cleaner Production 236: 117600. doi:https://doi.org/10.1016/j.jclepro.2019.07.075.