References
- AKU. 2017. Environmental Product Declaration - Bellamont Plus. https://portal.environdec.com/api/api/v1/EPDLibrary/Files/5fb51bd8-30a8-4e81-9da2-386fc3ad9518/Data
- Albers, K., P. Canepa, and J. Miller. 2008. Analyzing the Environmental Impacts of Simple Shoes – A Life Cycle Assessment of the Supply Chain and Evaluation of End-of-Life Management Options. Santa Barbara, CA, United States: Donald Bren School of Environmental Science & Management, University of California.
- Basegio, T., F. Berutti, A. Bernardes, and C. P. Bergmann. 2002. “Environmental and Technical Aspects of the Utilisation of Tannery Sludge as a Raw Material for Clay Products.” J. Eur. Ceram. Soc 22 (13): 2251–2259. doi:https://doi.org/10.1016/S0955-2219(02)00024-9.
- Bevilacqua, M., F. E. Ciarapica, and G. Giacchetta. 2008. “Design for Environment as a Tool for the Development of a Sustainable Supply Chain.” International Journal of Sustainable Engineering 1 (3): 188–201. doi:https://doi.org/10.1080/19397030802506657.
- Bevilacqua, M., F. E. Ciarapica, G. Giacchetta, and B. Marchetti. 2011. “A Carbon Footprint Analysis in the Textile Supply Chain.” International Journal of Sustainable Engineering 4 (1): 24–36. doi:https://doi.org/10.1080/19397038.2010.502582.
- Bevilacqua, M., F. E. Ciarapica, G. Mazzuto, and C. Paciarotti. 2014. “Environmental Analysis of a Cotton Yarn Supply Chain.” J. Clean. Prod 82: 154–165. doi:https://doi.org/10.1016/j.jclepro.2014.06.082.
- Bhavan, S., J. R. Rao, and B. U. Nair. 2008. “A Potential New Commercial Method for Processing Leather to Reduce Environmental Impact.” Env. Sci. Pollut. Res 15 (4): 293–295. doi:https://doi.org/10.1007/s11356-008-0001-8.
- Black, M., M. Canova, S. Rydin, B. M. Scalet, S. Roudier, and S. L. Delgado. 2013. Best Available Techniques (BAT) Reference Document for the Tanning of Hides and Skins – Industrial Emissions Directive 2010/75/EU (Integrated Pollution Prevention and Control). Luxembourg: Publications Office of the European Union.
- Caniato, F., M. Caridi, L. Crippa, and A. Moretto. 2012. “Environmental Sustainability in Fashion Supply Chains: An Exploratory Case Based Research.” Int. J. Prod. Econ 135 (2): 659–670. doi:https://doi.org/10.1016/j.ijpe.2011.06.001.
- Chapagain, A. K., A. Y. Hoekstra, H. H. G. Savenije, and R. Gautam. 2006. “The Water Footprint of Cotton Consumption: An Assessment of the Impact of Worldwide Consumption of Cotton Products on the Water Resources in the Cotton Producing Countries.” Ecol. Econ 60 (1): 186–203. doi:https://doi.org/10.1016/j.ecolecon.2005.11.027.
- Cheah, L., N. D. Ciceri, E. Olivetti, S. Matsumura, D. Forterre, R. Roth, and R. Kirchain. 2013. “Manufacturing-focused Emissions Reductions in Footwear Production.” J. Clean. Prod 44: 18–29. doi:https://doi.org/10.1016/j.jclepro.2012.11.037.
- Chen, K. W., L. C. Lin, and W. S. Lee. 2014. “Analyzing the Carbon Footprint of the Finished Bovine Leather: A Case Study of Aniline Leather.” En. Proc 61: 1063–1066. doi:https://doi.org/10.1016/j.egypro.2014.11.1023.
- Chowdury, Z. U. M., T. Ahmed, A. P. M. Antunes, and H. L. Pau. 2018. “Environmental Life Cycle Assessment of Leather Processing Industry: A Case Study of Bangladesh.” J. Soc. Leather Technol. Chem 102 (1): 18–26.
- Clay, J. 2004. “World Agriculture and the Environment.” In A Commodity-By-Commodity Guide To Impacts And Practices. London: Island Press. ISBN: 1559633700, 9781559633703
- Costantini, V., F. Crespi, G. Marin, and E. Paglialunga. 2017. “Eco-innovation, Sustainable Supply Chains and Environmental Performance in European Industries.” J. Clean. Prod 155 (2): 141–154. doi:https://doi.org/10.1016/j.jclepro.2016.09.038.
- Daddi, T., B. Nucci, and F. Iraldo. 2017. “Using Life Cycle Assessment (LCA) to Measure the Environmental Benefits of Industrial Symbiosis in an Industrial Cluster of SMEs.” J. Clean. Prod 147: 157–164. doi:https://doi.org/10.1016/j.jclepro.2017.01.090.
- Daddi, T., B. Nucci, F. Iraldo, and F. Testa. 2016. “Enhancing the Adoption of Life Cycle Assessment by Small and Medium Enterprises Grouped in an Industrial Cluster: A Case Study of the Tanning Cluster in Tuscany (Italy).” J. Ind. Ecol 20 (5): 1199–1211. doi:https://doi.org/10.1111/jiec.12379.
- Dhal, B., H. N. Thatoi, N. N. Das, and B. D. Pandey. 2013. “Chemical and Microbial Remediation of Hexavalent Chromium from Contaminated Soil and Mining/metallurgical Soil Waste: A Review.” J. Hazard. Mater 250-251: 272–291. doi:https://doi.org/10.1016/j.jhazmat.2013.01.048.
- Dissanayake, G., and P. Sinha. 2015. “An Examination of the Product Development Process for Fashion Remanufacturing.” Resour. Conserv. Recycl 104 (A): 94–102. doi:https://doi.org/10.1016/j.resconrec.2015.09.008.
- Djekic, I., and I. Tomasevic. 2016. “Environmental Impacts of the Meat Chain – Current Status and Future Perspectives.” Trends Food Sci. Technol 54: 94–102. doi:https://doi.org/10.1016/j.tifs.2016.06.001.
- ECO2L. 2011. Handbook with Basic Information for the Calculation of a Corporate Carbon Footprint (CCF) for a Leather Factory with Evaluation of Internal Energy Consumption in Comparison to the BEET Energy Benchmark (Best Energy Efficiency for Tanning). Frankfurt am Main, Germany: Verband der Deutschen Lederindustrie e.V. (VDL).
- Ellen MacArthur Foundation. 2017. A New Textiles Economy: Redesigning Fashion’s Future. https://www.ellenmacarthurfoundation.org/assets/downloads/publications/A-New-Textiles-Economy_Full-Report_Updated_1-12-17.pdf.
- Erdem, M. 2006. “Chromium Recovery from Chrome Shaving Generated in Tanning Process.” J. Hazard. Mater 129 (1–3): 143–146. doi:https://doi.org/10.1016/j.jhazmat.2005.08.021.
- European Commission. 2005. Reference Document on Best Available Techniques in the Slaughterhouses and Animal By-products Industries. Luxembourg: Publications Office of the European Union.
- European Commission, Joint Research Centre. 2013. Best Available Techniques (BAT) Reference Document for the Tanning of Hides and Skins. Luxembourg: Publications Office of the European Union.
- European Commission, Joint Research Centre, Institute for the Environment and Sustainability. 2012. “Characterization Factors of the ILCD Recommended Life Cycle Impact Assessment Methods.” In Database and Supporting Information. First edition. Luxembourg: Publications Office of the European Union.
- European Parliament and Council. 2013. “Decision No 1386/2013/EU of 20 November 2013 on a General Union Environment Action Programme to 2020 ‘Living Well, within the Limits of Our Planet’.” Official Journal of the EU L 354: 171–200.
- Fang, D., and L. X. Zhou. 2007. “Enhanced Cr Bioleaching Efficiency from Tannery Sludge with Coinoculation of Acidithiobacillus Thiooxidans TS6 and Brettanomyces B65 in an Air-lift Reactor.” Chemosphere 69 (2): 303–310. doi:https://doi.org/10.1016/j.chemosphere.2007.03.059.
- Gottfridsson, M., and Y. Zhang. 2015. Environmental Impacts of Shoe Consumption – Combining Product Flow Analysis with an LCA Model for Sweden. Gothenburg, Sweden: Department of Energy and Environment, Division of Environmental Systems Analysis, Chalmers University of Technology.
- Gül, S., M. Spielmann, A. Lehmann, D. Eggers, V. Bach, and M. Finkbeiner. 2015. “Benchmarking and Environmental Performance Classes in Life Cycle Assessment—development of a Procedure for Non-leather Shoes in the Context of the Product Environmental Footprint.” Int. J. LCA 20 (12): 1640–1648. doi:https://doi.org/10.1007/s11367-015-0975-7.
- Herva, M., A. Álvarez, and E. Roca. 2011. “Sustainable and Safe Design of Footwear Integrating Ecological Footprint and Risk Criteria.” J. Hazard. Mater 192 (3): 1876–1881. doi:https://doi.org/10.1016/j.jhazmat.2011.07.028.
- Huerta, A. R., L. P. Güereca, and M. S. R. Lozano. 2016. “Environmental Impact of Beef Production in Mexico through Life Cycle Assessment.” Resour. Conserv. Recycl 109: 44–53. doi:https://doi.org/10.1016/j.resconrec.2016.01.020.
- Islam, M., and M. Alauddin. 2012. “World Production of Jute: A Comparative Analysis of Bangladesh.” International Journal of Management and Business Studies 2 (1): 014–022. doi:https://doi.org/10.13140/2.1.1267.2964.
- Joseph, K., and N. Nithya. 2009. “Material Flows in the Life Cycle of Leather.” J. Clean. Prod 17 (7): 676–682. doi:https://doi.org/10.1016/j.jclepro.2008.11.018.
- Kılıç, E., R. Puigb, G. Zengin, C. A. Zengin, and P. Fullana-I-Palmer. 2018. “Corporate Carbon Footprint for Country Climate Change Mitigation: A Case Study of A Tannery in Turkey.” Sci. Total Environ 635: 60–69. doi:https://doi.org/10.1016/j.scitotenv.2018.04.111.
- Lee, M. J., and S. Rahimifard. 2012. “An Air-based Automated Material Recycling System for Postconsumer Footwear Products.” Resour. Conserv. Recycl 69: 90–99. doi:https://doi.org/10.1016/j.resconrec.2012.09.008.
- Liu, S., M. Leat, and M. Hudson Smith. 2011. “State-of The-art Sustainability Analysis Methodologies for Efficient Decision Support in Green Production Operations.” International Journal of Sustainable Engineering 4 (3): 236–250. doi:https://doi.org/10.1080/19397038.2011.574744.
- Luximon, A. 2013. Handbook of Footwear Design and Manufacture. Cambridge: Woodhead Publishing.
- Luximon, A., and L. Jiang. 2016. “The Role of Footwear Fitting and Comfort in the Environmental Impact of Footwear.” In Advances in Physical Ergonomics and Human Factors. Advances in Intelligent Systems and Computing, edited by R. Goonetilleke and W. Karwowski, 183–190. Vol. 489. Cham: Springer.
- Luximon, A., and Y. Luximon. 2009. “Shoe-last Design Innovation for Better Shoe Fitting.” Comp. Ind 60 (8): 621–628. doi:https://doi.org/10.1016/j.compind.2009.05.015.
- Milà I Canals, L., X. Domènèch, J. Rieradevall, R. Puig, and P. Fullana. 2002. “Use of Life Cycle Assessment in the Procedure for the Establishment of Environmental Criteria in the Catalan Eco-label of Leather.” Int. J. LCA 7 (39). doi:https://doi.org/10.1007/BF02978908.
- Milà, L., X. Domènèch, J. Rieradevall, P. Fullana, and R. Puig. 1998. “Application of Life Cycle Assessment to Footwear.” Int. J. LCA 3 (4): 203–208. doi:https://doi.org/10.1007/BF02977570.
- Moktadir, M. A., S. M. Ali, R. Rajesh, and S. K. Paul. 2018. “Modeling the Interrelationships among Barriers to Sustainable Supply Chain Management in Leather Industry.” J. Clean. Prod 181: 631–651. doi:https://doi.org/10.1016/j.jclepro.2018.01.245.
- Moretti, C., B. Corona, R. Edwards, M. Junginger, A. Moro, M. Rocco, and L. Shen. 2020. “Reviewing ISO Compliant Multifunctionality Practices in Environmental Life Cycle Modeling.” Energies 13 (14): 3579. doi:https://doi.org/10.3390/en13143579.
- Moretto, A., L. Macchion, A. Lion, F. Caniato, P. Danese, and A. Vinelli. 2018. “Designing A Roadmap Towards A Sustainable Supply Chain: A Focus on the Fashion Industry.” J. Clean. Prod 193: 169–184. doi:https://doi.org/10.1016/j.jclepro.2018.04.273.
- Muthu, S. S. 2015. Handbook of Life Cycle Assessment (LCA) of Textiles and Clothing. 1st Edition ed. Cambridge: Woodhead Publishing.
- Nike. 2010. NIKE, Inc. Corporate Responsibility Report FY07–09.
- Notarnicola, B., R. Puig Vidal, A. Raggi, P. Fullana Palmer, G. Tassielli, C. De Camillisi, and A. Ruis Carrasco. 2011. “Life Cycle Assessment of Italian and Spanish Bovine Leather Production Systems.” Afinidad: revista de química teórica y aplicada 68: 167–180.
- Noya, I., X. Aldea, S. González-García, C. M. Gasol, M. T. Moreira, M. J. Amores, D. Marín, and J. Boschmonart-Rives. 2017. “Environmental Assessment of the Entire Pork Value Chain in Catalonia – A Strategy to Work Towards Circular Economy.” Sci. Total Environ 589: 122–129. doi:https://doi.org/10.1016/j.scitotenv.2017.02.186.
- Perdijk, E. W., J. Luijten, and A. J. Selderijk 1994. An Eco-Label for Footwear. Background report (Report number: 9041). Rotterdam: CEA, communication and consultancy on environment and energy, Centrum TNO Leather and Shoes.
- Pires Ribeiro, J., and A. Barbosa-Povoa. 2018. “Supply Chain Resilience: Definitions and Quantitative Modelling Approaches – A Literature Review.” Comput. Ind. Eng 115: 109–122. doi:https://doi.org/10.1016/j.cie.2017.11.006.
- Puma. 2009. PUMAVision Sustainability Report 2007/2008.
- Rivera Muñoz, Z. 2013. Water, Energy and Carbon Footprints of a Pair of Leather Shoes. Stockholm, Sweden: Division of Industrial Ecology, ITM School of Industrial Engineering and Management, KTH Royal Institute of Technology.
- Roma, R., S. Corrado, A. De Boni, M. B. Forleo, V. Fantin, M. Moretti, N. Palmieri, A. Vitali, and C. De Camillis. 2015. “Life Cycle Assessment in the Livestock and Derived Edible Products Sector.” In Life Cycle Assessment in the Agri-food Sector, edited by B. Notarnicola, R. Salomone, L. Petti, P. Renzulli, R. Roma, and A. Cerutti. Cham: Springer. doi:https://doi.org/10.1007/978-3-319-11940-3
- Sangwan, K. S., K. Choudhary., and C. Batra. 2017. “Environmental Impact Assessment of a Ceramic Tile Supply Chain – A Case Study.” International Journal of Sustainable Engineering. doi:https://doi.org/10.1080/19397038.2017.1394398.
- Scavarda, A., G. Lima Daú, L. F. Scavarda, and A. L. Korzenowski. 2019. “A Proposed Healthcare Supply Chain Management Framework in the Emerging Economies with the Sustainable Lenses: The Theory, the Practice, and the Policy.” Resour. Conserv. Recycl 141: 418–430. doi:https://doi.org/10.1016/j.resconrec.2018.10.027.
- Scheffer, M. R. 2005. “A Sustainable Vision on the Cotton Industry after 2005.” In Proceedings of the Speech Held at the General Assembly of EUROCOTON, Brussels, Belgium, 30 May 2001.
- Silvestre Zottin, L. 2019. The Environmental Performance of Footwear in an Eco-friendly Company and Recommendations to Increase Sustainable Value Creation. Netherlands: Veja, Universiteit Utrecht.
- Sreeram, K. J., and T. Ramasami. 2003. “Sustaining Tanning Process through Conservation, Recovery and Better Utilization of Chromium. Resour.” Conserv. Recycl 38 (3): 185–212. doi:https://doi.org/10.1016/S0921-3449(02)00151-9.
- Styles, D., H. Schoenberger, and J.-L. Galvez-Marts. 2012. “Environmental Improvement of Product Supply Chains: A Review of European Retailers’ Performance.” Resour. Conserv. Recycl 65: 57–78. doi:https://doi.org/10.1016/j.resconrec.2012.05.002.
- Suhi, S. A., R. Enayet, T. Haque, S. M. Ali, M. A. Moktadir, and S. K. Paul. 2019. “Environmental Sustainability Assessment in Supply Chain: An Emerging Economy Context.” Env. Impact Assess. Rev 79: 106306. doi:https://doi.org/10.1016/j.eiar.2019.106306.
- Tasca, A. L., and M. Puccini. 2019. “Leather Tanning: Life Cycle Assessment of Retanning, Fatliquoring and Dyeing.” J. Clean. Prod 226: 720–729. doi:https://doi.org/10.1016/j.jclepro.2019.03.335.
- Tatàno, F., N. Acerbi, C. Monterubbiano, S. Pretelli, L. Tombari, and F. Mangani. 2012. “Shoe Manufacturing Wastes: Characterisation of Properties and Recovery Options.” Resour. Conserv. Recycl 66: 66–75. doi:https://doi.org/10.1016/j.resconrec.2012.06.007.
- Todeschini, B. V., M. N. Cortimiglia, D. Calegaro-de-menezes, and A. Ghezzi. 2017. “Innovative and Sustainable Business Models in the Fashion Industry: Entrepreneurial Drivers, Opportunities, and Challenges.” Bus. Horiz 60 (6): 759–770. doi:https://doi.org/10.1016/j.bushor.2017.07.003.
- Tran, A. N., and S. Jeppesen. 2016. “SMEs in Their Own Right: The Views of Managers and Workers in Vietnamese Textiles, Garment, and Footwear Companies.” J. Bus. Eth 137 (3): 589–608. doi:https://doi.org/10.1007/s10551-015-2572-x.
- Turker, D., and C. Altuntas. 2014. “Sustainable Supply Chain Management in the Fast Fashion Industry: An Analysis of Corporate Reports.” Eur. Manag. J 32 (5): 837–849. doi:https://doi.org/10.1016/j.emj.2014.02.001.
- UNIDO. 2012. Life Cycle Assessment, Carbon Footprint in Leather Processing (Review of Methodologies and Recommendations for Harmonization). Shanghai, China: Eighteenth Session of the LEATHER AND LEATHER PRODUCTS INDUSTRY PANEL.
- Van Dam, J. E. G., and H. L. Bos 2004. The Environmental Impact of Fibre Crops in Industrial Applications. ViaMichelin. last accessed 07 08 2018. https://www.viamichelin.it/.
- Waltho, C., S. Elhedhli, and F. Gzara. 2019. “Green Supply Chain Network Design: A Review Focused on Policy Adoption and Emission Quantification.” Int. J. Prod. Econ 208: 305–318. doi:https://doi.org/10.1016/j.ijpe.2018.12.003.
- Wang, Y. S., Z. Y. Pan, J. M. Lang, J. M. Xu, and Y. G. Zheng. 2007. “Bioleaching of Chromium from Tannery Sludge by Indigenous Acidithiobacillus Thiooxidans.” J. Hazard. Mater 147 (1–2): 319–324. doi:https://doi.org/10.1016/j.jhazmat.2007.01.005.
- Winter, S., and R. Lasch. 2016. “Environmental and Social Criteria in Supplier Evaluation – Lessons from the Fashion and Apparel Industry.” J. Clean. Prod 139: 175–190. doi:https://doi.org/10.1016/j.jclepro.2016.07.201.