References
- Åkerman, M., M. Halonen, and N. Wessberg. 2020. “Lost in Building Design Practices: The Intertwining of Energy with the Multiple Goals of Home Building in Finland.” Energy Research & Social Science 61 101335. ISSN 2214-6296. doi:https://doi.org/10.1016/j.erss.2019.101335.
- Alaidroos, A., and M. Krarti. 2015. “Optimal Design of Residential Building Envelope Systems in the Kingdom of Saudi Arabia.” Energy and Buildings 86: 104–117. doi:https://doi.org/10.1016/j.enbuild.2014.09.083.
- Al-Badi, A., A. Malik, and A. Gastli. 2009. “Assessment of Renewable Energy Resources Potential in Oman and Identification of Barrier to Their Significant Utilization.” Renewable and Sustainable Energy Reviews 13 (9): 2734–2739. doi:https://doi.org/10.1016/j.rser.2009.06.010.
- Al-Badi, A., A. Malik, K. Al-Areimi, and A. Al-Mamari. 2009. “Power Sector of Oman-Today and Tomorrow.” Renewable and Sustainable Energy Reviews 13 (8): 2192–2196. doi:https://doi.org/10.1016/j.rser.2009.03.010.
- Al-Odwani, A., M. Ahmed, and S. Bou-Hamad. 2007. “Carwash Water Reclamation in Kuwait.” Desalination 206 (1–3): 17–28. doi:https://doi.org/10.1016/j.desal.2006.03.560.
- Al-Saadi, S., and A. Shaaban. 2019. Zero energy building (ZEB) in a cooling dominated climate of Oman: design and energy performance analysis. Renewable and Sustainable Energy Reviews 112: 299–316. ISSN 1364–0321. doi:https://doi.org/10.1016/j.rser.2019.05.049
- Al-Sanea, S., and M. Zedan. 2011. “Improving Thermal Performance of Building Walls by Optimizing Insulation Layer Distribution and Thickness for Same Thermal Mass.” Applied Energy 88 (9): 3113–3124. doi:https://doi.org/10.1016/j.apenergy.2011.02.036.
- Al-Sanea, S., M. Zedan, and S. Al-Hussain. 2012. “Effect of Thermal Mass on Performance of Insulated Building Walls and the Concept of Energy Savings Potential.” Applied Energy 89 (1): 430–442. doi:https://doi.org/10.1016/j.apenergy.2011.08.009.
- Alsulaili, A., M. Al-Matrouk, R. Al-Baghli, and A. Al-Enezi. 2019. “Environmental and Economic Benefits of Applying Green Building Concepts in Kuwait.” Environment, Development and Sustainability 22: 3371–3387. doi:https://doi.org/10.1007/s10668-019-00352-1.
- ASHRAE. 2014. ASHRAE Guideline 14-2014 for Measurement of Energy and Demand Savings. Atlanta, GA: American Society of Heating, Refrigeration and Air Conditioning Engineers.
- ASHRAE Fundamentals Handbook (SI). 2013. Chapter 14 SI (2013): Climatic Design Information, American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc.: Atlanta, GA, USA..
- Becchio, C., P. Dabbene, E. Fabrizio, V. Monetti, and M. Filippi. 2014. “Cost Optimality Assessment of a Single Family House: Building and Technical Systems Solutions for the nZEB Target.” Energy and Buildings 90: 173–187. doi:https://doi.org/10.1016/j.enbuild.2014.12.050.
- Bocheńska-Skałecka, A., and E. Walter. 2020. “Application of the Integrated Design Process (IDP) Method to the Design of Riverside on the Example of Żmigród (Poland).” Sustainability 12 (16): 6684. doi:https://doi.org/10.3390/su12166684.
- Brambilla, A., G. Salvalai, M. Imperadori, and M. M. Sesana. 2018. “Nearly Zero Energy Building Renovation: From Energy Efficiency to Environmental Efficiency, a Pilot Case Study.” Energy and Buildings 166: 271–283. doi:https://doi.org/10.1016/j.enbuild.2018.02.002.
- Cellura, M., F. Guarino, S. Longo, and M. Mistretta. 2015. “Different Energy Balances for the Redesign of Nearly Net Zero Energy Buildings: An Italian Case Study.” Renewable and Sustainable Energy Reviews 45: 100–112. doi:https://doi.org/10.1016/j.rser.2015.01.048.
- Deng, S., A. Dalibard, M. Martin, Y. J. Dai, U. Eicker, and R. Z. Wang. 2011. “Energy Supply Concepts for Zero Energy Residential Buildings in Humid and Dry Climate.” Energy Conversion and Management 52 (6): 2455–2460. doi:https://doi.org/10.1016/j.enconman.2010.12.054.
- DesignBuilder Software. 2018. Design builder v5.5 simulation documentation. DesignBuilder Software Ltd., V5.5. Gloucestershire, UK. www.designbuilder.co.uk
- Directive (EU). 2018. 2018/844 of May 2018 amending Directive 2010/31/EU on energy performance of buildings. October 2018. https://ec.europa.eu/energy/en/topics/energy-efficiency/buildings
- DOE. 2010. “Energy Efficiency Trends in Residential and Commercial Building.” US Department of Energy. [Online] Accessed 16 April 2015. http://energy.gov/sites/prod/files/2013/11/f5/building_trends_2010.pdf
- Dong, B., S. Lee, and M. Sapar. 2005. “A Holistic Utility Bill Analysis Method for Baselining Whole Commercial Building Energy Consumption in Singapore.” Energy and Buildings 27 (2): 167–174. doi:https://doi.org/10.1016/j.enbuild.2004.06.011.
- eHome Automation LLC. 2021. “Home Automation, Alghanim Engineering.” Accessed February 2021. https://www.alghanimeg.com/en/home-solutions/smart-homes
- Elsarrag, E., and Y. Alhorr. 2012. “Modelling the Thermal Energy Demand of a Passive-House in the Gulf Region: The Impact of Thermal Insulation.” International Journal of Sustainable Built Environment 1 (1): 1–15. doi:https://doi.org/10.1016/j.ijsbe.2012.07.002.
- Energy Star. 2019. “US Environmental Protection Agency and US Department of Energy.” Accessed 4 June 2019. https://www.energystar.gov/products
- Evola, G., G. Margani, and L. Marletta. 2014. “Cost-effective Design Solutions for Low-rise Residential Net ZEBs in Mediterranean Climate.” Energy and Buildings 68: 7–18. doi:https://doi.org/10.1016/j.enbuild.2013.09.026.
- Feng, K., W. Lu, and Y. Wang. 2019. “Assessing Environmental Performance in Early Building Design Stage: An Integrated Parametric Design and Machine Learning Method.” Sustainable Cities and Society 50 101596. Article 101596. doi:https://doi.org/10.1016/jscs.2019.101596.
- Ferrara, M., F. Fabrizio, J. Virgone, and M. Filippi. 2014. “A Simulation-based Optimization Method for Cost-optimal Analysis of Nearly Zero Energy Buildings.” Energy and Buildings 84: 442–457. doi:https://doi.org/10.1016/j.enbuild.2014.08.031.
- Georges, L., M. Berner, and H. Mathisen. 2014. “Air Heating of Passive Houses in Cold Climates: Investigation Using Detailed Dynamic Simulations.” Building and Environment 74: 1–12. doi:https://doi.org/10.1016/j.buildenv.2013.12.020.
- Gercek, M., and Z. D. Arsan. 2019. “Energy and Environmental Performance Based Decision Support Process for Early Design Stages of Residential Buildings under Climate Change.” Sustainable Cities and Society 48: 101580. doi:https://doi.org/10.1016/j.scs.2019.101580.
- Hample Middle East. 2014. Energy Saving Study of Contex Thermoguard Products. WSP Middle East, Dubai, UAE.
- Ihm, P., and M. Krarti. 2012. “Design Optimization of Energy Efficient Residential Buildings in Tunisia.” Building and Environment 2012 58 81–90. doi:https://doi.org/10.1016/j.buildenv.2012.06.012.
- International pluming code (IPC). 2018. International Code Council, Building Officials and Code Administrators International. Falls Church, VA.
- Jalaei, F., F. Jalaei, and S. Mohamaddi. 2019. “An Integrated BIM-LEED Application to Automate Sustainable Design Assessment Framework at the Conceptual Stage of Building Projects.” Sustainable Cities and Society 53. Article 101979. doi:https://doi.org/10.1016/j.erss.2019.101335.
- Kani-Sanchez, C., and R. Richman. 2017. “Incorporating Variable Refrigerant Flow (VRF) Heat Pump Systems in Whole Building Energy Simulation – Detailed Case Study Using Measured Data.” Journal of Building Engineering 12: 314–324. doi:https://doi.org/10.1016/j.jobe.2017.06.016.
- Kazem, H. 2011. “Renewable Energy in Oman: Status and Future Prospects.” Renewable and Sustainable Energy Reviews 15 (8): 3465–3469. doi:https://doi.org/10.1016/j.rser.2011.05.015.
- Krarti, M., and P. Ihm. 2016. “Evaluation of Net-zero Energy Residential Buildings in the MENA Region.” Sustainable Cities and Society 22: 116–125. doi:https://doi.org/10.1016/j.scs.2016.02.007.
- Larsson, N. 2009. “The Integrated Design Process: History and Analysis.” International Initiative for a Sustainable Built Environment.
- MEW. 2019. Energy conservation code of practice, MEW/R-6/2018. Ministry of Electricity and Water, Kuwait, R6-2018.
- Najjar, M., K. Figueiredo, A. Hammad, and A. Haddad. 2019. “Integrated Optimization with Building Information Modelling and Life-cycle Assessment for Generating Energy Efficient Buildings.” Applied Energy 250: 1366–1382. doi:https://doi.org/10.1016/j.apenergy.2019.05.101.
- Noris, F., E. Musall, J. Salom, B. Berggren, S. O. Jensen, and K. Lindberg. 2014. “Implications of Weighting Factors on Technology Preference in Net Zero Energy Buildings.” Energy and Buildings 82: 250–262. doi:https://doi.org/10.1016/j.enbuild.2014.07.004.
- Sadeghifam, A., S. Zahraee, M. Meynagh, and I. Kiani. 2015. “Combined Use of Design of Experiment and Dynamic Building Simulation in Assessment of Energy Efficiency in Tropical Residential Buildings.” Energy and Buildings 86: 525–533. doi:https://doi.org/10.1016/j.enbuild.2014.10.052.
- Taleb, H. 2014. “Using Passive Cooling Strategies to Improve Thermal Performance and Reduce Energy Consumption of Residential Buildings in UAE Buildings.” Frontiers of Architectural Research 3 (2): 154–165. doi:https://doi.org/10.1016/j.foar.2014.01.002.
- United Nations Environment Programme (UNEP). 2009. Building and Climate Change: Summary for Decision-Makers. UNEP Sustainable Buildings and Climate Initiative, Paris.
- Vilūnė, L., and M. Violeta. 2021. “Integrated Building Design Technology Based on Quality Function Deployment and Axiomatic Design Methods: A Case Study.” Sustainable Cities and Society 65 102631. ISSN 2210-6707. doi:https://doi.org/10.1016/j.scs.2020.102631.
- Zhou, Z., L. Feng, S. Zhang, C. Wang, G. Chen, and T. Du. 2016. “The Operational Performance of “Net Zero Energy Building”: A Study in China.” Applied Energy 177: 716–728. doi:https://doi.org/10.1016/j.apenergy.2016.05.093.