References
- ACI Committee 211. (1991). ACI 211.1-91: Standard Practice for Selecting Proportions for Normal, Heavyweight, and Mass Concrete (Reapproved 2009). https://www.concrete.org/store/productdetail.aspx?ItemID=211191
- Afroughsabet, V., L. Biolzi, and P. J. M. Monteiro. 2018. “The Effect of Steel and Polypropylene Fibers on the Chloride Diffusivity and Drying Shrinkage of High-strength Concrete.” Composites Part B: Engineering 139: 84–96. doi:https://doi.org/10.1016/j.compositesb.2017.11.047.
- Agar, J. W. M. 2019. “Dialysis and the Environment: Seeking a More Sustainable Future.” Artificial Organs 43 (12): 1123–1129. doi:https://doi.org/10.1111/aor.13585.
- Aïssoun, B., K. Khayat, and J.-L. Gallias. 2016. “Variations of Sorptivity with Rheological Properties of Concrete Cover in Self-consolidating Concrete.” Construction and Building Materials 113: 113–120. doi:https://doi.org/10.1016/j.conbuildmat.2016.03.006.
- Albano, C., N. Camacho, M. Hernandez, A. Matheus, and A. Gutierrez. 2009. “Influence of Content and Particle Size of Waste Pet Bottles on Concrete Behavior at Different W/c Ratios.” Waste Management 29 (10): 2707–2716. doi:https://doi.org/10.1016/j.wasman.2009.05.007.
- Alderete, N. M., Y. A. V. Zaccardi, and N. De Belie. 2020. “Mechanism of Long-term Capillary Water Uptake in Cementitious Materials.” Cement and Concrete Composites 106: 103448. doi:https://doi.org/10.1016/j.cemconcomp.2019.103448.
- Al-Tayeb, M., M., . M. Zeyad, A. Dawoud, and B. A. Tayeh. 2020. “Experimental and Numerical Investigations of the Influence of Partial Replacement of Coarse Aggregates by Plastic Waste on the Impact Load.” International Journal of Sustainable Engineering 1–8. doi:https://doi.org/10.1080/19397038.2020.1774820.
- AS 1012.12.1. 1998. Methods of testing concrete - Determination of mass per unit volume of hardened concrete - Rapid measuring method. Australian Standard
- AS 1012.9:2014. 2014a. Methods of testing concrete - Compressive strength tests - Concrete, mortar and grout specimens. Australian Standard
- AS 1012.3.1:2014. 2014b. Methods of testing concrete - Determination of properties related to the consistency of concrete - Slump test. Australian Standard
- AS 1012.8.1:2014. 2014c. Methods of testing concrete - Method for making and curing concrete - Compression and indirect tensile test specimens. Australian Standard
- AS 1012.10-2000 (R2014). (2014). Methods of testing concrete Determination of indirect tensile strength of concrete cylinders (“Brasil” or splitting test). Standards Australia.
- AS 1012.17—1997. (2014). Determination of the static chord modulus of elasticity and Poisson’s ratio of concrete specimens. Standards Australia.
- ASTM C1585-13. (2013). Standard Test Method for Measurement of Rate of Absorption of Water by Hydraulic-Cement Concretes.
- ASTM G57-06. (2012). Standard Test Method for Field Measurement of Soil Resistivity Using the Wenner Four-Electrode Method.
- AS 2758. 2009. Aggregates and rock for engineering purposes Concrete aggregates. Standards Australia.
- Azarsa, P., and R. Gupta. 2017. “Electrical Resistivity of Concrete for Durability Evaluation: A Review.” Advances in Materials Science and Engineering, 2017. doi:https://doi.org/10.1155/2017/8453095
- Babu, D. S., K. G. Babu, and W. Tiong-Huan. 2006. “Effect of Polystyrene Aggregate Size on Strength and Moisture Migration Characteristics of Lightweight Concrete.” Cement and Concrete Composites 28 (6): 520–527. doi:https://doi.org/10.1016/j.cemconcomp.2006.02.018.
- Babu, K. G., and D. S. Babu. 2004. “Performance of Fly Ash Concretes Containing Lightweight EPS Aggregates.” Cement and Concrete Composites 26 (6): 605–611. doi:https://doi.org/10.1016/S0958-9465(03)00034-9.
- Bai, J., S. Wild, and B. B. Sabir. 2002. “Sorptivity and Strength of Air-cured and Water-cured PC–PFA–MK Concrete and the Influence of Binder Composition on Carbonation Depth.” Cement and Concrete Research 32 (11): 1813–1821. doi:https://doi.org/10.1016/S0008-8846(02)00872-4.
- Barnes, D. K. A., F. Galgani, R. C. Thompson, and M. Barlaz. 2009. “Accumulation and Fragmentation of Plastic Debris in Global Environments.” Philosophical Transactions of the Royal Society B: Biological Sciences 364 (1526): 1985–1998. doi:https://doi.org/10.1098/rstb.2008.0205.
- Cantero, B., I. F. S. Del Bosque, A. Matías, M. I. S. De Rojas, and C. Medina. 2020. “Water Transport Mechanisms in Concretes Bearing Mixed Recycled Aggregates.” Cement and Concrete Composites 107: 103486. doi:https://doi.org/10.1016/j.cemconcomp.2019.103486.
- Choi, Y. W., D. J. Moon, Y. J. Kim, and M. Lachemi. 2009. “Characteristics of Mortar and Concrete Containing Fine Aggregate Manufactured from Recycled Waste Polyethylene Terephthalate Bottles.” Construction and Building Materials 23 (8): 2829–2835. doi:https://doi.org/10.1016/j.conbuildmat.2009.02.036.
- Courard, L., Z. Zhao, and F. Michel. 2020. “Influence of Hydrophobic Product Nature and Concentration on Carbonation Resistance of Cultural Heritage Concrete Buildings.” Cement and Concrete Composites 115: 103860. doi:https://doi.org/10.1016/j.cemconcomp.2020.103860.
- Fraj,, A. Ben, M. Kismi, and P. Mounanga. 2010. “Valorization of Coarse Rigid Polyurethane Foam Waste in Lightweight Aggregate Concrete.” Construction and Building Materials 24 (6): 1069–1077. doi:https://doi.org/10.1016/j.conbuildmat.2009.11.010.
- Fresenius Medical Care Australia. (2020). https://www.fmc-au.com/
- General purpose and blended cements. (2010). AS 3972-2010. Australian Standard
- Golewski, G. L. 2020a. “Changes in the Fracture Toughness under Mode II Loading of Low Calcium Fly Ash (LCFA) Concrete Depending on Ages.” Materials 13 (22): 5241. doi:https://doi.org/10.3390/ma13225241.
- Golewski, G. L. 2020b. “Energy Savings Associated with the Use of Fly Ash and Nanoadditives in the Cement Composition.” Energies 13 (9): 2184. doi:https://doi.org/10.3390/en13092184.
- Golewski, G. L. 2021. “The Beneficial Effect of the Addition of Fly Ash on Reduction of the Size of Microcracks in the ITZ of Concrete Composites under Dynamic Loading.” Energies 14 (3): 668. doi:https://doi.org/10.3390/en14030668.
- Gu, L., and T. Ozbakkaloglu. 2016. “Use of Recycled Plastics in Concrete: A Critical Review.” Waste Management 51: 19–42. doi:https://doi.org/10.1016/j.wasman.2016.03.005.
- Hannawi, K., S. Kamali-Bernard, and W. Prince. 2010. “Physical and Mechanical Properties of Mortars Containing PET and PC Waste Aggregates.” Waste Management (New York, N.Y.) 30 (11): 2312–2320. doi:https://doi.org/10.1016/j.wasman.2010.03.028.
- He, W., X. Kong, Y. Fu, C. Zhou, and Z. Zheng. 2020. “Experimental Investigation on the Mechanical Properties and Microstructure of Hybrid Fiber Reinforced Recycled Aggregate Concrete.” Construction and Building Materials 261: 120488. doi:https://doi.org/10.1016/j.conbuildmat.2020.120488.
- Hilsdorf, H. & Kropp, J. (1995). Performance criteria for concrete durability. In CRC Press. E & FN Spon, London.
- Independent Cement and Lime Pty Ltd. 2020. EUREKA GP CEMENT®.. https://www.independentcement.com.au/product/eureka-gp-cement/
- Jacob-Vaillancourt, C., and L. Sorelli. 2018. “Characterization of Concrete Composites with Recycled Plastic Aggregates from Postconsumer Material Streams.” Construction and Building Materials 182: 561–572. doi:https://doi.org/10.1016/j.conbuildmat.2018.06.083.
- Jang, Y.-C., C. Lee, O.-S. Yoon, and H. Kim. 2006. “Medical Waste Management in Korea.” Journal of Environmental Management 80 (2): 107–115. doi:https://doi.org/10.1016/j.jenvman.2005.08.018.
- Klangsin, P., and A. K. Harding. 1998. “Medical Waste Treatment and Disposal Methods Used by Hospitals in Oregon, Washington, and Idaho.” Journal of the Air & Waste Management Association 48 (6): 516–526. doi:https://doi.org/10.1080/10473289.1998.10463706.
- Koushkbaghi, M., P. Alipour, B. Tahmouresi, E. Mohseni, A. Saradar, and P. K. Sarker. 2019. “Influence of Different Monomer Ratios and Recycled Concrete Aggregate on Mechanical Properties and Durability of Geopolymer Concretes.” Construction and Building Materials 205: 519–528. doi:https://doi.org/10.1016/j.conbuildmat.2019.01.174.
- Kurda, R., J. De Brito, and J. D. Silvestre. 2019. “Water Absorption and Electrical Resistivity of Concrete with Recycled Concrete Aggregates and Fly Ash.” Cement and Concrete Composites 95: 169–182. doi:https://doi.org/10.1016/j.cemconcomp.2018.10.004.
- Li, Q., K. Yang, and C. Yang. 2019. “An Alternative Admixture to Reduce Sorptivity of Alkali-activated Slag Cement by Optimising Pore Structure and Introducing Hydrophobic Film.” Cement and Concrete Composites 95: 183–192. doi:https://doi.org/10.1016/j.cemconcomp.2018.11.004.
- Liu, Y., F. J. Presuel-Moreno, and M. A. Paredes. 2015. “Determination of Chloride Diffusion Coefficients in Concrete by Electrical Resistivity Method.” ACI Materials Journal 112 (5): 5. doi:https://doi.org/10.14359/51687777.
- Marzouk, O. Y., R. M. Dheilly, and M. Queneudec. 2007. “Valorization of Post-consumer Waste Plastic in Cementitious Concrete Composites.” Waste Management (New York, N.Y.) 27 (2): 310–318. doi:https://doi.org/10.1016/j.wasman.2006.03.012.
- Methods for sampling and testing aggregates. (2009). AS 1141-2009. Standards Australia.
- Mohammadhosseini, H., and M. M. Tahir. 2018. “Durability Performance of Concrete Incorporating Waste Metalized Plastic Fibres and Palm Oil Fuel Ash.” Construction and Building Materials 180: 92–102. doi:https://doi.org/10.1016/j.conbuildmat.2018.05.282.
- Nematzadeh, M., M. Tayebi, and H. Samadvand. 2021. “Prediction of Ultrasonic Pulse Velocity in Steel Fiber-reinforced Concrete Containing Nylon Granule and Natural Zeolite after Exposure to Elevated Temperatures.” Construction and Building Materials 273: 121958. doi:https://doi.org/10.1016/j.conbuildmat.2020.121958.
- PCTE. (2021). “Concrete Resistivity Meter”. https://www.pcte.com.au/resipod-resistivity-meter
- Piccoli, G. B., M. Nazha, M. Ferraresi, F. N. Vigotti, A. Pereno, and S. Barbero. 2015. “Eco-dialysis: The Financial and Ecological Costs of Dialysis Waste Products: Is a ‘Cradle-to-cradle’model Feasible for Planet-friendly Haemodialysis Waste Management?” Nephrology Dialysis Transplantation 30 (6): 1018–1027. doi:https://doi.org/10.1093/ndt/gfv031.
- Rahimireskati, S., K. Ghabraie, E. O. Garcez, and R. Al-Ameri. 2021. “Prediction of the Mechanical Performance of High-Strength Concrete Containing Biomedical Polymeric Waste Obtained from Dialysis Treatment.” Applied Sciences 11 (5): 2053. doi:https://doi.org/10.3390/app11052053.
- Saikia, N., and J. Brito. 2013. “Waste Polyethylene Terephthalate as an Aggregate in Concrete.” Materials Research 16 (2): 341–350. doi:https://doi.org/10.1590/S1516-14392013005000017.
- Schecter, A., L. Birnbaum, J. J. Ryan, and J. D. Constable. 2006. “Dioxins: An Overview.” Environmental Research 101 (3): 419–428. doi:https://doi.org/10.1016/j.envres.2005.12.003.
- Seco, A., A. M. Echeverría, S. Marcelino, B. García, and S. Espuelas. 2020. “Durability of Polyester Polymer Concretes Based on Metallurgical Wastes for the Manufacture of Construction and Building Products.” Construction and Building Materials 240: 117907. doi:https://doi.org/10.1016/j.conbuildmat.2019.117907.
- Sengul, O. 2014. “Use of Electrical Resistivity as an Indicator for Durability.” Construction and Building Materials 73: 434–441. doi:https://doi.org/10.1016/j.conbuildmat.2014.09.077.
- Shadmani, A., B. Tahmouresi, A. Saradar, and E. Mohseni. 2018. “Durability and Microstructure Properties of SBR-modified Concrete Containing Recycled Asphalt Pavement.” Construction and Building Materials 185: 380–390. doi:https://doi.org/10.1016/j.conbuildmat.2018.07.080.
- Silva, R. V., J. De Brito, and N. Saikia. 2013. “Influence of Curing Conditions on the Durability-related Performance of Concrete Made with Selected Plastic Waste Aggregates.” Cement and Concrete Composites 35 (1): 23–31. doi:https://doi.org/10.1016/j.cemconcomp.2012.08.017.
- Şimşek, B., T. Uygunoğlu, H. Korucu, and M. M. Kocakerim. 2018. “Analysis of the Effects of Dioctyl Terephthalate Obtained from Polyethylene Terephthalate Wastes on Concrete Mortar: A Response Surface Methodology Based Desirability Function Approach Application.” Journal of Cleaner Production 170: 437–445. doi:https://doi.org/10.1016/j.jclepro.2017.09.176.
- Stallings, K. A., S. A. Durham, and M. G. Chorzepa. 2019. “Effect of Cement Content and Recycled Rubber Particle Size on the Performance of Rubber-modified Concrete.” International Journal of Sustainable Engineering 12 (3): 189–200. doi:https://doi.org/10.1080/19397038.2018.1505971.
- Szostak, B., and G. L. Golewski. 2020. “Improvement of Strength Parameters of Cement Matrix with the Addition of Siliceous Fly Ash by Using Nanometric CSH Seeds.” Energies 13 (24): 6734. doi:https://doi.org/10.3390/en13246734.
- Tahmouresi, B., M. Koushkbaghi, M. Monazami, M. T. Abbasi, and P. Nemati. 2019. “Experimental and Statistical Analysis of Hybrid-fiber-reinforced Recycled Aggregate Concrete.” Computers and Concrete 24 (3): 193–206.
- Tarrass, F., M. Benjelloun, O. Benjelloun, and T. Bensaha. 2010. “Water Conservation: An Emerging but Vital Issue in Hemodialysis Therapy.” Blood Purification 30 (3): 181–185. doi:https://doi.org/10.1159/000321485.
- Tibbetts, C. M., J. M. Paris, C. C. Ferraro, K. A. Riding, and T. G. Townsend. 2020. “Relating Water Permeability to Electrical Resistivity and Chloride Penetrability of Concrete Containing Different Supplementary Cementitious Materials.” Cement and Concrete Composites 107: 103491. doi:https://doi.org/10.1016/j.cemconcomp.2019.103491.
- Windfeld, E. S., and M. S.-L. Brooks. 2015. “Medical Waste management–A Review.” Journal of Environmental Management 163: 98–108. doi:https://doi.org/10.1016/j.jenvman.2015.08.013.
- Xu, L., F. Deng, and Y. Chi. 2017. “Nano-mechanical Behavior of the Interfacial Transition Zone between Steel-polypropylene Fiber and Cement Paste.” Construction and Building Materials 145: 619–638. doi:https://doi.org/10.1016/j.conbuildmat.2017.04.035.
- Xu, S., M. A. Malik, Z. Qi, B. Huang, Q. Li, and M. Sarkar. 2018. “Influence of the PVA Fibers and SiO 2 NPs on the Structural Properties of Fly Ash Based Sustainable Geopolymer.” Construction and Building Materials 164: 238–245. doi:https://doi.org/10.1016/j.conbuildmat.2017.12.227.