References
- Ahmad, F. B., P. A. Williams, J. L. Doublier, S. Durand, and A. Buleon. 1999. “Physico-chemical Characterisation of Sago Starch.” Carbohydrate Polymers 38 (4): 361–370. doi:https://doi.org/10.1016/S0144-8617(98)00123-4.
- Ahmed, N. 2019. “Direct Metal Fabrication in Rapid Prototyping: A Review.” Journal of Manufacturing Processes 42: 167–191. January2018. doi:https://doi.org/10.1016/j.jmapro.2019.05.001.
- Akhtar, Majid Niaz, Abu Bakar Sulong, M. K.Fadzly Radzi, N. F. Ismail, M. R. Raza, Norhamidi Muhamad, and Muhammad Azhar Khan. 2016. “Influence of Alkaline Treatment and Fiber Loading on the Physical and Mechanical Properties of Kenaf/Polypropylene Composites for Variety of Applications.” Progress in Natural Science: Materials International 26 (6): 657–64. https://doi.org/https://doi.org/10.1016/j.pnsc.2016.12.004
- Akil, H. M., M. F. Omar, A. A. M. Mazuki, S. Safiee, Z. A. M. Ishak, and A. Abu Bakar. 2011. “Kenaf Fiber Reinforced Composites: A Review.” Materials and Design 32 (8–9): 4107–4121. doi:https://doi.org/10.1016/j.matdes.2011.04.008.
- Ali, A., K. Shaker, Y. Nawab, M. Jabbar, T. Hussain, J. Militky, and V. Baheti. 2018. “Hydrophobic Treatment of Natural Fibers and Their composites—A Review.” Journal of Industrial Textiles 47 (8): 2153–2183. doi:https://doi.org/10.1177/1528083716654468.
- Balla, V. K., K. H. Kate, J. Satyavolu, P. Singh, and J. G. D. Tadimeti. 2019. “Additive Manufacturing of Natural Fiber Reinforced Polymer Composites: Processing and Prospects.” Composites Part B: Engineering 174: 106956. doi:https://doi.org/10.1016/j.compositesb.2019.106956. March.
- Bioplastics, B. (2016). “Biome Bioplastics Launches New Material for 3D Printing.”
- Brenken, B., E. Barocio, A. Favaloro, R. B. Pipes, and R. B. Pipes. 2018. “Fused Filament Fabrication of Fiber-Reinforced Polymers : A Review Fused Fi Lament Fabrication of Fi Ber-reinforced Polymers : A Review.” Additive Manufacturing 21 (February): 1–16. doi:https://doi.org/10.1016/j.addma.2018.01.002.
- Catriona, M., and W. Jonathan. 2014. “The Potential of 3D Printing to Reduce the Environmental Impacts of Production.” Eceee Industrial Summer Study Proceedings. Barcelona: Sea Green Tree.
- Chia, H. N., & Wu, B. M. (2015). “Recent advances in 3D printing of biomaterials.” Journal of Biological Engineering 9: 4. Retrieved from http://www.ncbi.nlm.nih.gov/pubmed/25866560
- Compton, Brett G., and Jennifer A. Lewis. 2014. “3D-Printing of Lightweight Cellular Composites.” Advanced Materials 26 (34): 5930–35. https://doi.org/https://doi.org/10.1002/adma.201401804
- Coppola, B., E. Garofalo, L. Di Maio, P. Scarfato, and L. Incarnato (2018). “Investigation on the Use of PLA/hemp Composites for the Fused Deposition Modelling (FDM) 3D Printing.” AIP Conference Proceedings, 1981, 1–5. https://doi.org/10.1063/1.5045948.
- Daver, F., K. P. M. Lee, M. Brandt, and R. Shanks. 2018. “Cork–PLA Composite Filaments for Fused Deposition Modelling.” Composites Science and Technology 168: 230–237. doi:https://doi.org/10.1016/j.compscitech.2018.10.008.
- de Carvalho, A. J. F., and E. Trovatti. 2016. “Biomedical Applications for Thermoplastic Starch.” Biodegradable and Biobased Polymers for Environmental and Biomedical Applications 1–23. doi:https://doi.org/10.1002/9781119117360.ch1.
- De Leon, A. C., Q. Chen, N. B. Palaganas, J. O. Palaganas, J. Manapat, and R. C. Advincula. 2016. “High Performance Polymer Nanocomposites for Additive Manufacturing Applications.” Reactive and Functional Polymers 103: 141–155. doi:https://doi.org/10.1016/j.reactfunctpolym.2016.04.010.
- Dehghan-Manshadi, A., P. Yu, M. Dargusch, D. StJohn, and M. Qian. 2020. “Metal Injection Moulding of Surgical Tools, Biomaterials and Medical Devices: A Review.” Powder Technology 364: 189–204. doi:https://doi.org/10.1016/j.powtec.2020.01.073.
- Dhinakaran, V., K. V. Surendar, M. S. H. Riyaz, and M. Ravichandran. 2020. “Materials Today: Proceedings.” Review on Study of Thermosetting and Thermoplastic Materials in the Automated Fiber Placement Process 27: 812–815. doi:https://doi.org/10.1016/j.matpr.2019.12.355.
- Dufresne, A., and M. R. Vignon. 1998. “Improvement of Starch Film Performances Using Cellulose Microfibrils.” Macromolecules 31 (8): 2693–2696. doi:https://doi.org/10.1021/ma971532b.
- Fiore, V., G. Di Bella, and A. Valenza. 2015. “The Effect of Alkaline Treatment on Mechanical Properties of Kenaf Fibers and Their Epoxy Composites.” Composites Part B: Engineering 68: 14–21. doi:https://doi.org/10.1016/j.compositesb.2014.08.025.
- Furtado, S. C. R., A. J. Silva, C. Alves, L. Reis, M. Freitas, and P. Ferrão. 2012. “Natural Fibre Composites: Automotive Applications.” RSC Green Chemistry 1 (16): 118–139.
- Ghanbari, A., T. Tabarsa, A. Ashori, A. Shakeri, and M. Mashkour. 2018. “Preparation and Characterization of Thermoplastic Starch and Cellulose Nanofibers as Green Nanocomposites: Extrusion Processing.” International Journal of Biological Macromolecules 112: 442–447. doi:https://doi.org/10.1016/j.ijbiomac.2018.02.007.
- Glenn, G. M., W. Orts, D. F. Wood, G. M. Glenn, W. Orts, S. Imam, … D. F. Wood. 2014. “Applications Agriculture Applications.” In Starch Plastic Packaging and Agriculture Applications.
- Hernández-Jaimes, C., R. G. Utrilla-Coello, H. Carrillo-Navas, E. García-Márquez, M. Meraz, L. A. Bello-Pérez, J. Alvarez-Ramirez, and J. Alvarez-Ramirez. 2014. “Corn Starch Acid Hydrolysis at the Onset Gelatinization Temperature: Morphology, Crystallinity, Viscoelasticity, and Thermal Properties.” Starch/Staerke 66 (7–8): 636–644. doi:https://doi.org/10.1002/star.201300215.
- Hiemenz, J.2013. “Additive Manufacturing Trends in Aerospace.” Additive Manufacturing 6. http://www.stratasys.com.
- Horvath, D. (2017). “Discovering Opportunities for Biopolymers in 3D Printing.” Retrieved from https://3dprintingindustry.com/news/discovering-opportunities-biopolymers-3d-printing-119046/
- Huang, C. Y. (2018). “Extrusion-based 3D Printing and Characterization of Edible Materials.” Retrieved from https://uwspace.uwaterloo.ca/handle/10012/12899
- Jagenteufel, R. 2017. “Rheology Of High Melt Strength Polypropylene For Additive Manufacturing.” Advanced Materials Letters 8 (6): 712–716. doi:https://doi.org/10.5185/amlett.2017.1450.
- Jenkins, P. J., R. E. Cameron, and A. M. Donald. 1993. “A Universal Feature in the Structure of Starch Granules from Different Botanical Sources.” Starch ‐ Stärke 45 (12): 417–420. doi:https://doi.org/10.1002/star.19930451202.
- Kabir, M. M., H. Wang, K. T. Lau, and F. Cardona. 2012. “Chemical Treatments on Plant-based Natural Fibre Reinforced Polymer Composites: An Overview.” Composites Part B: Engineering 43 (7): 2883–2892. doi:https://doi.org/10.1016/j.compositesb.2012.04.053.
- Khan, B., B. K. Niazi, M. Samin, and Z. Jahan. 2017. “Thermoplastic Starch: A Possible Biodegradable Food Packaging Material—A Review.” Journal of Food Process Engineering 40 (3): 3. doi:https://doi.org/10.1111/jfpe.12447.
- Kicińska-Jakubowska, A., E. Bogacz, and M. Zimniewska. 2012. “Review of Natural Fibers. Part I-Vegetable Fibers.” Journal of Natural Fibers 9 (3): 150–167. doi:https://doi.org/10.1080/15440478.2012.703370.
- Krishna, K. V., and K. Kanny. 2016. “The Effect of Treatment on Kenaf Fiber Using Green Approach and Their Reinforced Epoxy Composites.” Composites Part B: Engineering 104: 111–117. doi:https://doi.org/10.1016/j.compositesb.2016.08.010.
- Kumar Ghosh, S., S. Bairagi, R. Bhattacharyya, and M. Mohan Mondal (2016). “Study on Potential Application of Natural Fibre Made Fabrics as Thermal Insulation Medium.” (CD-ROM American International Journal of Research in Science Technology, Engineering & Mathematics AIJRSTEM, (February 2017), 2328–3491. Retrieved from http://www.iasir.net
- kumar, M. R. 2016. “Characterization and Comparison of Natural and Synthetic Fiber Composite Laminates.” International Journal of Engineering and Techniques 2 (5): 1–8. Retrieved from http://www.ijetjournal.org
- Kuo, C.-C., Liu, L. -C., Teng, W. -F., Chang, H. -Y., Chien, F -M., Liao, S. -J., Kuo, W. -F., and Chen, C. -M. 2016. “Preparation of Starch/Acrylonitrile-butadiene-styrene Copolymers (ABS) Biomass Alloys and their Feasible Evaluation for 3D Printing Applications.” Composites Part B: Engineering 86 (1): 36-39.
- Kyle, S., Z. M. Jessop, A. Al-Sabah, and I. S. Whitaker. 2017. “‘Printability” of Candidate Biomaterials for Extrusion Based 3D Printing: State-of-the-Art.” Advanced Healthcare Materials 6 (16): 1–16. doi:https://doi.org/10.1002/adhm.201700264.
- Le Duigou, A., M. Castro, R. Bevan, and N. Martin. 2016. “3D Printing of Wood Fibre Biocomposites: From Mechanical to Actuation Functionality.” Materials and Design 96: 106–114. doi:https://doi.org/10.1016/j.matdes.2016.02.018.
- Lee, C. Y., and C. Y. Liu. 2019. “The Influence of Forced-air Cooling on a 3D Printed PLA Part Manufactured by Fused Filament Fabrication.” Additive Manufacturing 25: 196–203. doi:https://doi.org/10.1016/j.addma.2018.11.012.
- López, O. V., N. E. Zaritzky, and M. A. García. 2010. “Physicochemical Characterization of Chemically Modified Corn Starches Related to Rheological Behavior, Retrogradation and Film Forming Capacity.” Journal of Food Engineering 100 (1): 160–168. doi:https://doi.org/10.1016/j.jfoodeng.2010.03.041.
- Luchese, C. L., J. M. Frick, V. L. Patzer, J. C. Spada, and I. C. Tessaro. 2015. “Synthesis and Characterization of Biofilms Using Native and Modified Pinhão Starch.” Food Hydrocolloids 45: 203–210. doi:https://doi.org/10.1016/j.foodhyd.2014.11.015.
- Mahjoub, R., J. M. Yatim, A. R. Mohd Sam, and S. H. Hashemi. 2014. “Tensile Properties of Kenaf Fiber Due to Various Conditions of Chemical Fiber Surface Modifications.” Construction and Building Materials 55: 103–113. doi:https://doi.org/10.1016/j.conbuildmat.2014.01.036.
- Manickavasagam, V. M., B. Vijaya Ramnath, C. Elanchezhian, V. Aravinthan, and A. Vignesh. 2018. “Natural Fibre composites-A Review.” IOP Conference Series: Materials Science and Engineering 390 (1): 012065. doi:https://doi.org/10.1088/1757-899X/390/1/012065.
- Marsh, K., and B. Bugusu. 2007. “Food Packaging - Roles, Materials, and Environmental Issues: Scientific Status Summary.” Journal of Food Science 72 (3): 3. doi:https://doi.org/10.1111/j.1750-3841.2007.00301.x.
- Maslinda, A. B., M. S. Abdul Majid, M. J. M. Ridzuan, M. Afendi, and A. G. Gibson. 2017. “Effect of Water Absorption on the Mechanical Properties of Hybrid Interwoven Cellulosic-cellulosic Fibre Reinforced Epoxy Composites.” Composite Structures 167: 227–237. doi:https://doi.org/10.1016/j.compstruct.2017.02.023.
- Mazzanti, V., L. Malagutti, and F. Mollica. 2019. “FDM 3D Printing of Polymers Containing Natural Fillers: A Review of Their Mechanical Properties.” Polymers 11 (7): 1094. doi:https://doi.org/10.3390/polym11071094.
- McKeen, L. W. 2016. Binders. Fluorinated Coatings and Finishes Handbook. 59–82. doi:https://doi.org/10.1016/b978-0-323-37126-1.00004-7.
- Michael, K., and S. Z. Lai. 2019. Looking for Biodegradable Alternatives - Metro News. January. Star Online.
- Millholand, C. (2016). “Plastic Is Still the Leading Material in the 3D Printing Industry.”
- Mohamed, S. A. N., E. S. Zainudin, S. M. Sapuan, M. D. Azaman, and A. M. T. Arifin. 2018. Introduction to Natural Fiber Reinforced Vinyl Ester and Vinyl Polymer Composites. Natural Fibre Reinforced Vinyl Ester and Vinyl Polymer Composites. Elsevier . https://doi.org/10.1016/b978-0-08-102160-6.00001-9
- Montalvo, J. I. N., and M. A. Hidalgo (2020). “3D Printing with Natural Fiber Reinforced Filament.” Proceedings - 26th Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, SFF 2015, 922–934.
- Muzzy, J. D., and A. O. Kays. 1984. “Thermoplastic Vs. Thermosetting Structural Composites.” Polymer Composites 5 (3): 169–172. doi:https://doi.org/10.1002/pc.750050302.
- Mwaikambo, L. Y. (2017). “Review of the History, Properties and Application of Plant Fibres Review of the History” (May).
- Nagaraju, T. T. 2019. “A Review on Fiber Reinforcement in Composite Plastics by Fused.” International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) November. 53–58.
- Nayak, N., H. Reddappa, N. Ganesh, R. Kalagi, and V. Bhat. 2017. “Electrical Insulating Properties of Natural Fibre Reinforced Polymer Composites; A Review.” International Journal of Engineering Research 6 (8): 166–171. doi:https://doi.org/10.17577/ijertv6is080083.
- Netravali, A. N. 2005. “Biodegradable Natural Fiber Composites.” In Biodegradable and Sustainable Fibres: A Volume in Woodhead Publishing Series in Textiles, 271–309. doi:https://doi.org/10.1533/9781845690991.271.
- Netravali, Anil N. 2004. “Ramie Fiber Reinforced Natural Plastics.” Natural Fibers, Plastics and Composites 321–43.https://doi.org/https://doi.org/10.1007/978-1-4419-9050-1_18
- Nikzad, M., S. H. Masood, and I. Sbarski. 2011. “Thermo-mechanical Properties of a Highly Filled Polymeric Composites for Fused Deposition Modeling.” Materials and Design 32 (6): 3448–3456. doi:https://doi.org/10.1016/j.matdes.2011.01.056.
- Nurul Fazita, M. R., H. P. S. Abdul Khalil, T. M. Wai, E. Rosamah, and N. A. Sri Aprilia. 2017. Hybrid Bast Fiber Reinforced Thermoset Composites. Hybrid Polymer Composite Materials: Properties and Characterisation. Elsevier. https://doi.org/10.1016/B978-0-08-100787-7.00009-3
- Obada, D. O., L. S. Kuburi, M. Dauda, S. Umaru, D. Dodoo-Arhin, M. B. Balogun, M. J. Iorpenda, and M. J. Iorpenda. 2020. “Effect of Variation in Frequencies on the Viscoelastic Properties of Coir and Coconut Husk Powder Reinforced Polymer Composites.” Journal of King Saud University - Engineering Sciences 32 (2): 148–157. doi:https://doi.org/10.1016/j.jksues.2018.10.001.
- Olakanmi, E. O., R. F. Cochrane, and K. W. Dalgarno. 2015. “A Review on Selective Laser Sintering/Melting (SLS/SLM) of Aluminium Alloy Powders: Processing, Microstructure, and Properties.” Progress in Materials Science 74: 401–77.https://doi.org/https://doi.org/10.1016/j.pmatsci.2015.03.002
- Osorio-Díaz, P., L. A. Bello-Pérez, E. Agama-Acevedo, A. Vargas-Torres, J. Tovar, and O. Paredes-López. 2002. “In Vitro Digestibility and Resistant Starch Content of Some Industrialized Commercial Beans (Phaseolus Vulgaris L.).” Food Chemistry 78 (3): 333–337. doi:https://doi.org/10.1016/S0308-8146(02)00117-6.
- Oushabi, A., S. Sair, F. Oudrhiri Hassani, Y. Abboud, O. Tanane, and A. El Bouari. 2017. “The Effect of Alkali Treatment on Mechanical, Morphological and Thermal Properties of Date Palm Fibers (Dpfs): Study of the Interface of DPF–Polyurethane Composite.” South African Journal of Chemical Engineering 23: 116–123. doi:https://doi.org/10.1016/j.sajce.2017.04.005.
- Ozsoy, I. B., H. Choi, P. Joseph, G. Li, I. Luzinov, and H. Zhao. 2017. “Reinforced Thermoplastic Composites with Interfacial Microarchitectural Anchoring: Computational Study.” International Journal of Solids and Structures 112: 54–64. doi:https://doi.org/10.1016/j.ijsolstr.2017.02.021.
- Peças, P., H. Carvalho, H. Salman, and M. Leite. 2018. “Natural Fibre Composites and Their Applications: A Review.” Journal of Composites Science 2 (4): 66. doi:https://doi.org/10.3390/jcs2040066.
- Petchwattana, N., W. Channuan, P. Naknaen, and B. Narupai. 2019. “3D Printing Filaments Prepared from Modified Poly(lactic Acid)/teak Wood Flour Composites: An Investigation on the Particle Size Effects and Silane Coupling Agent Compatibilisation.” Journal of Physical Science 30 (2): 169–188. doi:https://doi.org/10.21315/jps2019.30.2.10.
- Preet Singh, J. I., V. Dhawan, S. Singh, and K. Jangid. 2017. “Study of Effect of Surface Treatment on Mechanical Properties of Natural Fiber Reinforced Composites.” Materials Today: Proceedings 4 (2): 2793–2799. doi:https://doi.org/10.1016/j.matpr.2017.02.158.
- Pu, N. A. S. M., R. H. A. Haq, H. M. Noh, H. Z. Abdullah, M. I. Idris, and T. C. Lee. 2020. “Materials Today : Proceedings Review on the Fabrication of Fused Deposition Modelling (FDM) Composite Filament for Biomedical Applications.” Materials Today: Proceedings 29: 228–232. doi:https://doi.org/10.1016/j.matpr.2020.05.535.
- Rahim, T. N. A. T., A. M. Abdullah, and H. Md Akil. 2019. “Recent Developments in Fused Deposition Modeling-Based 3D Printing of Polymers and Their Composites.” Polymer Reviews 59 (4): 589–624. doi:https://doi.org/10.1080/15583724.2019.1597883.
- Ribba, L., N. L. Garcia, N. D’Accorso, and S. Goyanes (2017). “Disadvantages of Starch-Based Materials, Feasible Alternatives in order to Overcome These Limitations.” Starch-Based Materials in Food Packaging: Processing, Characterization and Applications, 37–76. https://doi.org/10.1016/B978-0-12-809439-6.00003-0.
- Saba, N., M. T. Paridah, and M. Jawaid. 2015. “Mechanical Properties of Kenaf Fibre Reinforced Polymer Composite: A Review.” Construction and Building Materials 76: 87–96. doi:https://doi.org/10.1016/j.conbuildmat.2014.11.043.
- Sanjay, M. R., G. R. Arpitha, L. Laxmana Naik, K. Gopalakrishna, and B. Yogesha. 2016. “Applications of Natural Fibers and Its Composites: An Overview.” Natural Resources 7 (3): 108–14. https://doi.org/https://doi.org/10.4236/nr.2016.73011
- Sanjay, M. R., P. Madhu, M. Jawaid, P. Senthamaraikannan, S. Senthil, and S. Pradeep. 2018. “Characterization and Properties of Natural Fiber Polymer Composites: A Comprehensive Review.” Journal of Cleaner Production 172: 566–581. Elsevier B.V. doi:https://doi.org/10.1016/j.jclepro.2017.10.101.
- Sarah, S. (2018). “Biopolymers” 3DPrint.com Voice of 3D Printing/Additive Manufacturing.
- Sezer, H. K., and O. Eren. 2019. “FDM 3D Printing of MWCNT Re-inforced ABS Nano-composite Parts with Enhanced Mechanical and Electrical Properties.” Journal of Manufacturing Processes 37: 339–347. December2017. doi:https://doi.org/10.1016/j.jmapro.2018.12.004.
- Siakeng, R., M. Jawaid, H. Ariffin, S. M. Sapuan, M. Asim, and N. Saba. 2019. “Natural Fiber Reinforced Polylactic Acid Composites: A Review.” Polymer Composites 40 (2): 446–463. doi:https://doi.org/10.1002/pc.24747.
- Sithole, C., K. Nyembwe, and P. Olubambi. 2019. “Process Knowledge for Improving Quality in Sand Casting Foundries: A Literature Review.” Procedia Manufacturing 35: 356–360. doi:https://doi.org/10.1016/j.promfg.2019.05.052.
- Sreenivasan, S., S. Sulaiman, B. T. H. T. Baharudin, M. K. A. Ariffin, and K. Abdan. 2013. “Recent Developments of Kenaf Fibre Reinforced Thermoset Composites: Review.” Materials Research Innovations 17 (SUPPL 2): s2–s11. doi:https://doi.org/10.1179/1432891713Z.000000000312.
- Stansbury, J. W., and M. J. Idacavage. 2016. “3D Printing with Polymers: Challenges among Expanding Options and Opportunities.” Dental Materials 32 (1): 54–64. doi:https://doi.org/10.1016/j.dental.2015.09.018.
- Stoof, D., Pickering, K. L., & Zhang, Y. (2017). Fused deposition modelling of natural fibre/polylactic acid composites. Journal of Composites Science, 1(1), 8. https://doi.org/https://doi.org/10.3390/jcs1010008
- Sun, X. S. 2013. Overview of Plant Polymers: Resources, Demands, and Sustainability. Resources, Demands, and Sustainability. Handbook of Biopolymers and Biodegradable Plastics: Properties, Processing and Applications. Elsevier.
- Tholibon, D., I. Tharazi, A. B. Sulong, N. Muhamad, N. Farhani Ismail, K. Fadzly, and D. Hui. 2019. “Kenaf Fiber Composites: A Review on Synthetic and Biodegradable Polymer Matrix (Komposit Gentian Kenaf: Satu Ulasan Bagi Sintetik Dan Biodegradasi Polimer Matrik).” Jurnal Kejuruteraan 31 (1): 65–76. Retrieved from. doihttps://doi.org/10.17576/jkukm-2019-31.
- Torrado Perez, A. R., D. A. Roberson, and R. B. Wicker. 2014. “Fracture Surface Analysis of 3D-printed Tensile Specimens of Novel ABS-based Materials.” Journal of Failure Analysis and Prevention 14 (3): 343–353. doi:https://doi.org/10.1007/s11668-014-9803-9.
- Wa, M., and L. Wa. 2017. “Materials for 3D Printing by Fused Deposition.” In Technician Education in Additive Manufacturing and Material, 1–21.
- Wang, C., L. M. Smith, W. Zhang, M. Li, G. Wang, S. Q. Shi, … S. Zhang. 2019. “Reinforcement of Polylactic Acid for Fused Deposition Modeling Process with Nano Particles Treated Bamboo Powder.” Polymers 11: 7. doi:https://doi.org/10.3390/polym11071146.
- Wang, P., B. Zou, and S. Ding. 2019. “Modeling of Surface Roughness Based on Heat Transfer considering Diffusion among Deposition Filaments for FDM 3D Printing Heat-resistant Resin.” Applied Thermal Engineering 161: 114064. doi:https://doi.org/10.1016/j.applthermaleng.2019.114064. July.
- Wang, X., M. Jiang, Z. Zhou, J. Gou, and D. Hui. 2017. “3D Printing of Polymer Matrix Composites: A Review and Prospective.” Composites Part B: Engineering 110: 442–458. doi:https://doi.org/10.1016/j.compositesb.2016.11.034.
- Wang, Cuicui, Lee Miller Smith, Wenfu Zhang, Mingpeng Li, Ge Wang, Sheldon Q. Shi, Haitao Cheng, and Shuangbao Zhang. 2019. “Reinforcement of Polylactic Acid for Fused Deposition Modeling Process with Nano Particles Treated Bamboo Powder.” Polymers 11 (7). https://doi.org/https://doi.org/10.3390/polym11071146
- Yang, E., S. Miao, J. Zhong, Z. Zhang, D. K. Mills, and L. G. Zhang. 2018. “Bio-Based Polymers for 3D Printing of Bioscaffolds.” Polymer Reviews 58 (4): 668–687. doi:https://doi.org/10.1080/15583724.2018.1484761.
- Zhang, Y., C. Rempel, and D. McLaren. 2013. “Thermoplastic Starch.” In Innovations in Food Packaging. Second Edition ed., 391–412. doi:https://doi.org/10.1016/B978-0-12-394601-0.00016-3.
- Zhong, W., F. Li, Z. Zhang, L. Song, and Z. Li. 2001. “Short Fiber Reinforced Composites for Fused Deposition Modeling.” Materials Science and Engineering A 301 (2): 125–130. doi:https://doi.org/10.1016/S0921-5093(00)01810-4.
- Zhou, Y. G., J. R. Zou, H. H. Wu, and B. P. Xu. 2020. “Balance between Bonding and Deposition during Fused Deposition Modeling of Polycarbonate and Acrylonitrile-butadiene-styrene Composites.” Polymer Composites 41 (1): 60–72. doi:https://doi.org/10.1002/pc.25345.