4,091
Views
7
CrossRef citations to date
0
Altmetric
Research Article

Sustainable machining: environmental performance analysis of turning

, ORCID Icon &
Pages 15-34 | Received 22 May 2021, Accepted 12 Oct 2021, Published online: 28 Oct 2021

References

  • Akbari, H., and O. Sezgen. 1992. “Analysis of Energy Use in Building Services of the Industrial Sector in California: Two Case Studies.” Energy and Buildings 19 (2): 133–141. doi:10.1016/0378-7788(92)90007-4.
  • Balogun, V. A., and P. T. Mativenga. 2013. “Modelling of Direct Energy Requirements in Mechanical Machining Processes.” J. Clean. Prod 41: 179–186. doi:10.1016/j.jclepro.2012.10.015.
  • Bilga, P. S., S. Singh, and R. Kumar. 2016. “Optimization of Energy Consumption Response Parameters for Turning Operation Using Taguchi Method.” J. Clean. Prod 137: 1406–1417. doi:10.1016/j.jclepro.2016.07.220.
  • Bogatyreva, I. V., L. A. Ilyukhina, M. V. Simonova, and N. V. Kozhukhova, 2019. “Estimation of the Efficiency of Working Time Usage as a Factor of Sustainable Increase of Labor Productivity.” SHS Web of Conferences, pp. 1–5, Gdańsk - Nynäshamn, Poland. 10.1051/shsconf/20196206002.
  • Çakır, O., M. Kıyak, and E. Altan. 2004. “Comparison of Gases Applications to Wet and Dry Cuttings in Turning.” Journal of Materials Processing Technology 153-154: 35–41. doi:10.1016/j.jmatprotec.2004.04.190.
  • Campatelli, G., 2009. “Analysis of the Environmental Impact for a Turning Operation of AISI 1040 Steel.” IPROMS Conference (pp. 6-17).
  • Campitelli, A., J. Cristobal, J. Fischer, B. Becker, and L. Schebek. 2019. “Resource Efficiency Analysis of Lubricating Strategies for Machining Processes Using Life Cycle Assessment Methodology.” Journal of Cleaner Production 222: 464–475. doi:10.1016/j.jclepro.2019.03.073.
  • Camposeco-Negrete, C. 2013. “Optimization of Cutting Parameters for Minimizing Energy Consumption in Turning of AISI 6061 T6 Using Taguchi Methodology and ANOVA.” Journal of Cleaner Production 53: 195–203. doi:10.1016/j.jclepro.2013.03.049.
  • Camposeco-Negrete, C., J. D. C. D. Nájera, and J. C. Miranda-Valenzuela. 2016. “Optimization of Cutting Parameters to Minimize Energy Consumption during Turning of AISI 1018 Steel at Constant Material Removal Rate Using Robust Design.” . The International Journal of Advanced Manufacturing Technology 83 (5–8): 1341–1347. doi:10.1007/s00170-015-7679-9.
  • Chandrakasan, A., S. Kumanan, and N. Sivakumaran. 2010. “Application of Grey Based Taguchi Method in Multi-Response Optimization of Turning Process.” Adv. Prod. Eng. Manag 5: 171–180.
  • Chen, J., and L. Xue, 2002. “Microstructural Characteristics of Laser-clad AISI P20 Tool Steel.” The 1st ASM International Surface Engineering & the 13th IFHTSE Congress. pp. 198–205, Columbus, Ohio.
  • Clarens, A. F., J. B. Zimmerman, G. A. Keoleian, K. F. Hayes, and S. J. Skerlos. 2008. “Comparison of Life Cycle Emissions and Energy Consumption for Environmentally Adapted Metalworking Fluid Systems.” . Environmental Science & Technology 42 (22): 8534–8540. doi:10.1021/es800791z.
  • Dahmus, J. B., and T. G. Gutowski. 2004. “An Environmental Analysis of Machining, In: Proceedings of IMECE2004.” California 1–10. doi:10.1115/IMECE2004-62600.
  • Dambhare, S. G., S. J. Deshmukh, and A. B. Borade. 2015. “Machining Parameter Optimization in Turning Process for Sustainable Manufacturing.” Int. J. Ind. Eng. Comput 6: 327–338. doi:10.5267/j.ijiec.2015.3.002.
  • Dave, H. K., L. S. Patel, and H. K. Raval. 2012. “Effect of Machining Conditions on MRR and Surface Roughness during CNC Turning of Different Materials Using TiN Coated Cutting Tools – A Taguchi Approach.” Int. J. Ind. Eng. Comput 3: 925–930. doi:10.5267/j.ijiec.2012.04.005.
  • Diniz, A. E., and R. Micaroni. 2002. “Cutting Conditions for Finish Turning Process Aiming: The Use of Dry Cutting.” International Journal of Machine Tools and Manufacture 42 (8): 899–904. doi:10.1016/S0890-6955(02)00028-7.
  • Dragon2000, 2017. “Labour Efficiency Explained [WWW Document].” URL https://www.dragon2000.co.uk/labour-efficiency-explained/ (accessed 11. 26.20).
  • Gamage, J. R., A. K. M. Desilva, C. S. Harrison, and D. K. Harrison. 2016. “Process Level Environmental Performance of Electrodischarge Machining of Aluminium (3003) and Steel (AISI P20).” . Journal of Cleaner Production 137: 291–299. doi:10.1016/j.jclepro.2016.07.090.
  • Gamage, J. R., A. K. M. Desilva, D. Chantzis, and M. Antar. 2017. “Sustainable Machining: Process Energy Optimisation of Wire Electrodischarge Machining of Inconel and Titanium Superalloys.” . Journal of Cleaner Production 164: 642–651. doi:10.1016/j.jclepro.2017.06.186.
  • Ghani, J. A., M. Rizal, and C. H. C. Haron. 2014. “Performance of Green Machining: A Comparative Study of Turning Ductile Cast Iron FCD700.” Journal of Cleaner Production 85: 289–292. doi:10.1016/j.jclepro.2014.02.029.
  • Goedkoop, M., R. Heijungs, M. Huijbregts, S. A. De, Struijs, J. Zelm, and R. Van, 2009. “ReCiPe 2008.”
  • Gupta, M. K., Q. Song, Z. Liu, C. I. Pruncu, M. Mia, G. Singh, J. A. Lozano, et al. 2020. “Machining Characteristics Based Life Cycle Assessment in Eco-benign Turning of Pure Titanium Alloy.” Journal of Cleaner Production 251: 119598. doi:10.1016/j.jclepro.2019.119598.
  • Huang, H., and G. Ameta. 2014. “Computational Energy Estimation Tools for Machining Operations during Preliminary Design.” International Journal of Sustainable Engineering 7 (2): 130–143. doi:10.1080/19397038.2013.862580.
  • Huijbregts, M. A. J., Z. J. N. Steinmann, P. M. F. Elshout, G. Stam, F. Verones, M. D. M. Vieira, A. Hollander, M. Zijp, Zelm, and R. Van. 2016. “ReCiPe 2016 V1.1.” A Harmonized Life Cycle Impact Assessment Method at Midpoint and Endpoint Level. Report I: Characterization, pp. 1-40.
  • Jakhar, V., M. Nayak, and N. Sharma. 2017. “A Literature Review on Optimization of Input Cutting Parameters for Improved Surface Finish in Turning Process.” Int. Res. J. Eng. Technol 4: 2810–2815.
  • Karna, S. K., and R. Sahai. 2015. “An Overview on Taguchi Method.” Int. J. Eng. Math. Sci 1: 11–18.
  • Kaynak, Y., T. Lu, and I. S. Jawahir. 2014. “Cryogenic Machining-Induced Surface Integrity: A Review and Comparison with Dry, MQL, and Flood-Cooled Machining.” Machining Science and Technology 18 (2): 149–198. doi:10.1080/10910344.2014.897836.
  • Kloepffer, W. 2008. “Life Cycle Sustainability Assessment of Products.” The International Journal of Life Cycle Assessment 13 (2): 89–95. doi:10.1065/lca2008.02.376.
  • Lv, J., R. Tang, W. Tang, Y. Liu, Y. Zhang, and S. Jia. 2017. “An Investigation into Reducing the Spindle Acceleration Energy Consumption of Machine Tools.” Journal of Cleaner Production 143: 794–803. doi:10.1016/j.jclepro.2016.12.045.
  • Mia, M., M. K. Gupta, J. A. Lozano, D. Carou, D. Y. Pimenov, G. Krolczyk, A. M. Khan, and N. R. Dhar. 2019. “Multi-objective Optimization and Life Cycle Assessment of Eco-friendly Cryogenic N2 Assisted Turning of Ti-6Al-4V.” Journal of Cleaner Production 210: 121–133. doi:10.1016/j.jclepro.2018.10.334.
  • Miller, R. J., H. S. Lenihan, E. B. Muller, N. Tseng, S. K. Hanna, and A. A. Keller. 2010. “Impacts of Metal Oxide Nanoparticles on Marine Phytoplankton.” Environmental Science & Technology 44 (19): 7329–7334. doi:10.1021/es100247x.
  • Munoz, A. A., and P. Sheng. 1995. “An Analytical Approach for Determining the Environmental Impact of Machining Processes.” Journal of Materials Processing Technology 53 (3–4): 736–758. doi:10.1016/0924-0136(94)01764-R.
  • Muthukumarana, T. T., H. P. Karunathilake, H. K. G. Punchihewa, M. M. I. D. Manthilake, and K. N. Hewage. 2018. “Life Cycle Environmental Impacts of the Apparel Industry in Sri Lanka: Analysis of the Energy Sources.” . Journal of Cleaner Production 172: 1346–1357. doi:10.1016/j.jclepro.2017.10.261.
  • Nalbant, M., H. Gokkaya, and G. Sur. 2007. “Application of Taguchi Method in the Optimization of Cutting Parameters for Surface Roughness in Turning.” Materials & Design 28 (4): 1379–1385. doi:10.1016/j.matdes.2006.01.008.
  • Pandey, S., E. Dogan, and D. Taskin. 2020. “Production-based and Consumption-based Approaches for the Energy-growth-environment Nexus: Evidence from Asian Countries.” Sustainable Production and Consumption 23: 274–281. doi:10.1016/j.spc.2020.06.006.
  • Peng, T., and X. Xu. 2014. “A Holistic Approach to Achieving Energy Efficiency for Interoperable Machining Systems.” International Journal of Sustainable Engineering 7 (2): 111–129. doi:10.1080/19397038.2013.811558.
  • Pereira, O., A. Rodriguez, A. I. Fernández-abia, J. Barreiro, and L. N. Lopez de Lacalle. 2016. “Cryogenic and Minimum Quantity Lubrication for an Eco-efficiency Turning of AISI 304.” Journal of Cleaner Production 139: 440–449. doi:10.1016/j.jclepro.2016.08.030.
  • Pervaiz, S., S. Kannan, and H. Kishawy. 2018. “An Extensive Review of the Water Consumption and Cutting Fluid Based Sustainability Concerns in the Metal Cutting Sector.” Journal of Cleaner Production 197: 134–153. doi:10.1016/j.jclepro.2018.06.190.
  • Pusavec, F., P. Krajnik, and J. Kopac. 2010. “Transitioning to Sustainable Production – Part I: Application on Machining Technologies.” Journal of Cleaner Production 18 (2): 174–184. doi:10.1016/j.jclepro.2009.08.010.
  • Radhika, N., G. K. Chandran, P. Shivaram, and K. T. V. Karthik. 2015. “Multi-Objective Optimization of EDM Parameters Using Grey Relation Analysis.” J. Eng. Sci. Technol 10: 1–11.
  • Rajemi, M. F., P. T. Mativenga, and A. Aramcharoen. 2010. “Sustainable Machining: Selection of Optimum Turning Conditions Based on Minimum Energy Considerations.” Journal of Cleaner Production 18 (10–11): 1059–1065. doi:10.1016/j.jclepro.2010.01.025.
  • Rao, R. V. 2008. “Environmental Impact Assessment of Manufacturing Processes Using a Combinatorial Mathematics Based Decision Making Method.” Int. J. Sustain. Eng 1 (1): 42–50. doi:10.1080/19397030801972611.
  • Renna, P. 2018. “Energy Saving by Switch-off Policy in a Pull-controlled Production Line.” Sustainable Production and Consumption 16: 25–32. doi:10.1016/j.spc.2018.05.006.
  • Risbood, K. A., U. S. Dixit, and A. D. Sahasrabudhe. 2003. “Prediction of Surface Roughness and Dimensional Deviation by Measuring Cutting Forces and Vibrations in Turning Process.” J. Mater. Process. Technol 132 (1–3): 203–214. doi:10.1016/S0924-0136(02)00920-2.
  • Schultheiss, F., J. Zhou, E. Gröntoft, and J.-E. Ståhl. 2013. “Sustainable Machining through Increasing the Cutting Tool Utilization.” Journal of Cleaner Production 59: 298–307. doi:10.1016/j.jclepro.2013.06.058.
  • Senevirathne, S. W. M. A. I. 2015. “Effect of Air and Chilled Emulsion Minimum Quantity Lubrication (ACEMQL) in Machining Hard to Cut Metals.” University of Moratuwa.
  • Shahabi, H. H., and M. M. Ratnam. 2009. “In-cycle Monitoring of Tool Nose Wear and Surface Roughness of Turned Parts Using Machine Vision.” The International Journal of Advanced Manufacturing Technology 40 (11–12): 1148–1157. doi:10.1007/s00170-008-1430-8.
  • Silva, D. A. L., R. A. P. Filleti, A. L. Christoforo, E. J. Silva, and A. R. Ometto, 2015. “Application of Life Cycle Assessment (LCA) and Design of Experiments (DOE) to the Monitoring and Control of a Grinding Process.” The 22nd CIRP Conference on Life Cycle Engineering Application. Elsevier B.V., pp. 508–513, Sydney, Australia. 10.1016/j.procir.2015.01.037.
  • Siniawski, M., and C. Bowman. 2009. “Metal Working Fluids: Finding Green in the Manufacturing Process.” Industrial Lubrication and Tribology 61 (2): 60–66. doi:10.1108/00368790910940374.
  • Sivaiah, P., and D. Chakradhar. 2018. “Effect of Cryogenic Coolant on Turning Performance Characteristics during Machining of 17-4 PH Stainless Steel : A Comparison with MQL, Wet, Dry Machining.” CIRP J. Manuf. Sci. Technol 21: 86–96. doi:10.1016/j.cirpj.2018.02.004.
  • Smith, B., 2019. “Why Is Surface Finish Important in Engineering Applications? [WWW Document].” URL https://www.azom.com/article.aspx?ArticleID=17627 (accessed 4. 27.20).
  • Tol, N. V., 2020. “Shaft Considerations for Bearing Applications Part 2: Roughness [WWW Document].” URL https://toolbox.igus.com/motion-plastics-blog/shaft-roughness-considerations-for-bearing-applications (accessed 8.21.21).
  • U.S. Energy Information Administration, 2011. “Annual Energy Review [WWW Document].” URL http://www.eia.gov/totalenergy/data/annual/index.cfm (accessed 3. 20.21).
  • U.S. Energy Information Administration. 2019. International Energy Outlook 2019. Washington.
  • World Data, 2019. “Energy Consumption in Sri Lanka [WWW Document].” URL https://www.worlddata.info/asia/sri-lanka/energy-consumption.php (accessed 9.24.20).