1,230
Views
2
CrossRef citations to date
0
Altmetric
Research Article

Spatial analysis to quantify and localise the residual cardoon stem fibres as potential bio-reinforcements for building materials

, ORCID Icon, & ORCID Icon
Pages 59-70 | Received 09 Nov 2021, Accepted 09 Feb 2022, Published online: 21 Feb 2022

References

  • Aarhus, A. 2015. “Building Materials: From Waste to Resource”. Conference: Young Scientists Towards the Challenges of Modern Technology, Warsaw.
  • Abbasi, M., M. S. Pishvaee, and S. Bairamzadeh. 2020. “Land Suitability Assessment for Paulownia Cultivation Using Combined GIS and Z-number DEA: A Case Study.” Computers and Electronics in Agriculture 176: 105666. doi:10.1016/j.compag.2020.105666.
  • Asdrubali, F., F. D’Alessandro, and S. Schiavoni. 2015. “A Review of Unconventional Sustainable Building Insulation Materials.” Sustain Mater Technol 4: 1–17.
  • Ashour, T., and W. Wu. 2010. “An Experimental Study on Shrinkage of Earth Plaster with Natural Fibres for Straw Bale Buildings.” International Journal of Sustainable Engineering 3 (4): 299–304. doi:10.1080/19397038.2010.504379.
  • Badami, G., M. Caracci, and D. Costanzo. 2017. “.” In Le Filiere Agroalimentari Siciliane. Analisi Puntuale eTendenze del Settore ad uso Delle Imprese Agricole eDell’utenza Pubblica. Lausanne, Switzerland: Editions Antipode.
  • Barbosa, C. H., M. A. Andrade, F. Vilarinho, I. Castanheira, A. L. Fernando, M. R. Loizzo, and A. Sanches Silva. 2020. “A New Insight on Cardoon: Exploring New Uses Besides Cheese Making with A View to Zero Waste.” Foods 9 (5): 564. doi:10.3390/foods9050564.
  • Barreca, F., G. D. Cardinali, C. R. Fichera, and P. Praticò. 2018. “Utilization of Cork Residues for High Performance Walls in Green Buildings.” Agricultural Engineering International: CIGR Journal 20 (1): 47–55.
  • Dale, B. E., F. Sibilla, C. Fabbri, M. Pezzaglia, B. Pecorino, E. Veggia, A. Baronchelli, et al. 2016. “An Innovative New System Is Commercialized in Italy.” Biofuels Bioprod Biorefin 10 (4): 341–345. DOI:10.1002/bbb.1671.
  • De Rosa, I. M., J. M. Kenny, D. Puglia, C. Santulli, and F. Sarasini. 2010. “Morphological, Thermal and Mechanical Characterization of Okra (Abelmoschus Esculentus) Fibres as Potential Reinforcement in Polymer Composites.” Compos Sci Technol 70 (1): 116–122. doi:10.1016/j.compscitech.2009.09.013.
  • Díaz-Palacios-Sisternes, S., F. Ayuga, and A. I. García. 2014. “A Method for Detecting and Describing Land Use Transformations: An Examination of Madrid’s Southern Urban–rural Gradient between 1990 and 2006.” Cities 40 (Part A): 99–110. doi:10.1016/j.cities.2014.03.010.
  • Elanchezhian, C., B. V. Ramnath, G. Ramakrishnan, M. Rajendrakumar, V. Naveenkumar, and M. K. Saravanakumar. 2018. “Review on Mechanical Properties of Natural Fibre Composites.” Mater Today Proc 5 (1): 1785–1790. doi:10.1016/j.matpr.2017.11.276.
  • Esposito, M., P. Di Pierro, W. Dejonghe, L. Mariniello, and R. Porta. 2016. “Enzymatic Milk Clotting Activity in Artichoke (Cynara Scolymus) Leaves and Alpine Thistle (Carduus Defloratus) Flowers. Immobilization of Alpine Thistle Aspartic Protease.” Food Chem 204: 115–121. doi:10.1016/j.foodchem.2016.02.060.
  • Fagone, M., H. Kloft, F. Loccarini, and G. Ranocchiai. 2019. “Jute Fabric as a Reinforcement for Rammed Earth Structures.” Compos Part B Eng 175: 107064. doi:10.1016/j.compositesb.2019.107064.
  • Ferrero, F., E. Dinuccio, L. Rollé, E. Tabacco, and G. Borreani. 2020. “Suitability of Cardoon (Cynara Cardunculus L.) Harvested at Two Stages of Maturity to Ensiling and Methane Production.” Biomass and Bioenergy 142 (1): 105776. doi:10.1016/j.biombioe.2020.105776.
  • Fiore, V., A. Valenza, and G. Di Bella. 2011. “Artichoke (Cynara Cardunculus L.) Fibres as Potential Reinforcement of Composite Structures.” Composites Science and Technology 71 (8): 1138–1144. doi:10.1016/j.compscitech.2011.04.003.
  • Foti, S., G. Mauromicale, S. A. Raccuia, B. Fallico, F. Fanella, and E. Maccarone. 1999. “Possible Alternative Utilization of Cynara Spp. I. Biomass, Grain Yield and Chemical Composition of Grain.” Ind Crops Prod 10 (3): 219–228. doi:10.1016/S0926-6690(99)00026-6.
  • Galan-Marin, C., C. Rivera-Gomez, and A. Garcia-Martinez. 2016. “Use of Natural-fibre Bio-composites in Construction versus Traditional Solutions: Operational and Embodied Energy Assessment.” Materials 9 (6): 465. doi:10.3390/ma9060465.
  • Galán-Marín, C., C. Rivera-Gómez, and J. Petric-Gray. 2010a. “Effect of Animal Fibres Reinforcement on Stabilized Earth Mechanical Properties.” J. Biobased Mater. Bioenergy 4 (2): 121–128. doi:10.1166/jbmb.2010.1076.
  • Galán-Marín, C., C. Rivera-Gómez, and J. Petric-Gray. 2010b. “Animal Fibres and Seaweed Polymers to Improve Unfired Clay Blocks Characteristics.” J. Biobased. Mater. Bioenergy 4: 1–8.
  • Gonzalez, A., and M. Etxeberria. 2014. “Experimental Analysis of Properties of High Performance Recycled Aggregate Concrete.” Construction and Building Materials 52: 227–235. doi:10.1016/j.conbuildmat.2013.11.054.
  • Höhn, J., E. Lehtonen, S. Rasi, and J. Rintala. 2014. “A Geographical Information System (GIS) Based Methodology for Determination of Potential Biomasses and Sites for Biogas Plants in Southern Finland.” Appl Energy 113: 1–10. doi:10.1016/j.apenergy.2013.07.005.
  • Ingrao, C., C. Arcidiacono, A. Bezama, G. Ioppolo, K. Winans, A. Koutinas, and A. Gallego-Schmid. 2019. “Sustainability Issues of By-product and Waste Management Systems, to Produce Building Material Commodities: A Comprehensive Review of Findings from A Virtual Special Issue.” Resources, Conservation and Recycling 146: 358–365. doi:10.1016/j.resconrec.2019.04.001.
  • Ingrao, C., A. Lo Giudice, J. Bacenetti, C. Tricase, G. Dotelli, M. Fiala, V. Siracusa, and C. Mbohwa. 2015. “Energy and Environmental Assessment of Industrial Hemp for Building Applications: A Review.” Renewable and Sustainable Energy Reviews 51: 29–42. doi:10.1016/j.rser.2015.06.002.
  • Ingrao, C., F. Scrucca, C. Tricase, and F. Asdrubali. 2016. “A Comparative Life Cycle Assessment of External Wall-compositions for Cleaner Construction Solutions in Buildings.” Journal of Cleaner Production 124: 283–298. doi:10.1016/j.jclepro.2016.02.112.
  • Istat, 2021. “ISTAT - Italian Institute of Statistics Several Years”. Available online: www.dati.istat.it (accessed on 25 June 2021).
  • Liuzzi, S., S. Sanarica, and P. Stefanizzi. 2017. “Use of Agro-wastes in Building Materials in the Mediterranean Area: A Review.” Energy Procedia 126: 242–249. doi:10.1016/j.egypro.2017.08.147.
  • Lo Giudice, A., C. Mbohwa, M. T. Clasadonte, and C. Ingrao. 2014. “Life Cycle Assessment Interpretation and Improvement of the Sicilian Artichokes Production.” International Journal of Environmental Research 8 (2): 305–316.
  • Mathew, L., K. U. Joseph, and R. Joseph. 2006. “Isora Fibre: Morphology, Chemical Composition, Surface Modification, Physical, Mechanical and Thermal Properties – A Potential Natural Reinforcement.” J Nat Fibres 3 (4): 13–27. doi:10.1300/J395v03n04_02.
  • Mathur, V. K. 2006. “Composite Materials from Local Resources.” Constr Build Mater 20 (7): 470–477. doi:10.1016/j.conbuildmat.2005.01.031.
  • Mounir, S., A. Khabbazi, A. Khaldoun, Y. Maaloufa, and Y. El Hamdouni. 2015. “Thermal Inertia and Thermal Properties of the Composite Material Clay-wool.” Sustain. Cities Soc 19: 191–199. doi:10.1016/j.scs.2015.07.018.
  • Moussa, T., C. Maalouf, C. Ingrao, F. Scrucca, G. Costantine, and F. Asdrubali. 2018. “Bio-based and Recycled-waste Materials in Buildings: A Study of Energy Performance of Hemp-lime Concrete and recycled-PET Façades for Office Facilities in France and Italy.” Sci. Technol. Built Environ 24 (5): 492–501. doi:10.1080/23744731.2018.1438664.
  • Osmani, A., and J. Zhang. 2017. “Multi-period Stochastic Optimization of A Sustainable Multi-feedstock Second Generation Bioethanol Supply Chain − A Logistic Case Study in Midwestern United States.” Land Use Policy 61: 420–445. doi:10.1016/j.landusepol.2016.10.028.
  • Pandino, G., S. Lombardo, and G. Mauromicale. 2013. “Globe Artichoke Leaves and Floral Stems as a Source of Bioactive Compounds.” Industrial Crops and Products 44: 44–49. doi:10.1016/j.indcrop.2012.10.022.
  • Parlato, M. C. M., and S. M. C. Porto. 2020. “Organized Framework of Main Possible Applications of Sheep Wool Fibres in Building Components.” Sustainability 12 (3): 761. doi:10.3390/su12030761.
  • Parlato, M. C. M., F. Valenti, and S. M. C. Porto. 2020. “Covering Plastic Films in Greenhouses System: A GIS-based Model to Improve Post Use Sustainable Management.” Journal of Environmental Management 263: 110389. doi:10.1016/j.jenvman.2020.110389.
  • Picuno, P. 2016. “Use of Traditional Material in Farm Buildings for a Sustainable Rural Environment.” Int. J. Sustain. Built Environ 5 (2): 451–460. doi:10.1016/j.ijsbe.2016.05.005.
  • Raja, T., P. Anand, M. Karthik, and M. Sundaraj. 2017. “Evaluation of Mechanical Properties of Natural Fibre Reinforced Composites - A Review.” Int J Mech Eng Technol 8: 915–924.
  • Rojat, F., M. Olivier, A. Mesbah, and B. Xiao. 2015. “Mechanical Characterization of Natural Fibre-Reinforced Earth Plasters.” In ICBBM 2015 - First Int. Conf. Bio-based Build. Mater, edited by Amziane, Sofiane, Sonebi, Mohammed, and Charlet, Karine, 64-71. Clermont-Ferrand, France: RILEM Publications S.A.R.L.
  • Sain, M., and S. Panthapulakkal. 2004. “Green Fibre Thermoplastic Composites.” In Woodhead Publishing Series in Composites Science and Engineering, edited by Ansell, Martin P, 181–206. Sawston, Cambridge, UK: Green Composites, Woodhead Publishing.
  • Sanjay, M. R., P. Madhu, M. Jawaid, P. Senthamaraikannan, S. Senthil, and S. Pradeep. 2018. “Characterization and Properties of Natural Fiber Polymer Composites: A Comprehensive Review.” Journal of Cleaner Production 172: 566–581. doi:10.1016/j.jclepro.2017.10.101.
  • Sarasini, F., and V. Fiore. 2018. “A Systematic Literature Review on Less Common Natural Fibres and Their Biocomposites.” Journal of Cleaner Production 195: 240–267. doi:10.1016/j.jclepro.2018.05.197.
  • Selim, S., D. Koc-San, C. Selim, and B. Taner San. 2018. “Site Selection for Avocado Cultivation Using GIS and Multi-criteria Decision Analyses: Case Study of Antalya, Turkey.” Computers and Electronics in Agriculture 154: 450–459. doi:10.1016/j.compag.2018.09.038.
  • Selvaggi, R., and F. Valenti. 2021. “Assessment of Fruit and Vegetable Residues Suitable for Renewable Energy Production: GIS-based Model for Developing New Frontiers within the Context of Circular Economy.” Applied System Innovation 4 (1): 1–15. doi:10.3390/asi4010010.
  • Selvaggi, R., F. Valenti, G. Pappalardo, L. Rossi, S. Bozzetto, B. Pecorino, B. E. Dale, et al. 2018. “Sequential Crops for Food, Energy, and Economic Development in Rural Areas: The Case of Sicily.” Biofuels Bioprod Bioref 12 (1): 22–28. DOI:10.1002/bbb.1844.
  • Selvaggi, R., F. Valenti, B. Pecorino, and S. M. C. Porto. 2021. “Assessment of Tomato Peels Suitable for Producing Biomethane within the Context of Circular Economy: A GIS-based Model Analysis.” Sustainability 13 (10): 5559. doi:10.3390/su13105559.
  • Singh, M., D. A. B. Roy, S. Waseem, and H. Singh. 2021. “Feasibility and Performance Analysis of Carbonated Recycled Aggregate Concrete.” International Journal of Sustainable Engineering 14 (4): 761–775. doi:10.1080/19397038.2020.1856967.
  • Thyavihalli Girijappa, Y. G., S. Mavinkere Rangappa, J. Parameswaranpillai, and S. Siengchin. 2019. “Natural Fibers as Sustainable and Renewable Resource for Development of Eco-Friendly Composites: A Comprehensive Review.” Frontiers in Materials 6: 226. doi:10.3389/fmats.2019.00226.
  • Turco, R., D. Zannini, S. Mallardo, G. Dal Poggetto, R. Tesser, G. Santagata, M. Malinconico, and M. Di Serio. 2021. “Biocomposites Based on Poly(lactic Acid), Cynara Cardunculus Seed Oil and Fibrous Presscake: A Novel Eco-friendly Approach to Hasten PLA Biodegradation in Common Soil.” Polymer Degradation and Stability 188: 109576. doi:10.1016/j.polymdegradstab.2021.109576.
  • Valenti, F., S. M. Porto, G. Chinnici, G. Cascone, and C. Arcidiacono. 2016. “A GIS-based Model to Estimate Citrus Pulp Availability for Biogas Production: An Application to A Region of the Mediterranean Basin.” Biofuels Bioprod Biorefin 10 (6): 710–721. doi:10.1002/bbb.1707.
  • Valenti, F., S. M. C. Porto, G. Chinnici, R. Selvaggi, G. Cascone, C. Arcidiacono, and B. Pecorino. 2017. “Use of Citrus Pulp for Biogas Production: A GIS Analysis of Citrus-growing Areas and Processing Industries in South Italy.” Land Use Policy 66: 151–161. doi:10.1016/j.landusepol.2017.04.041.
  • Valenti, F., S. M. C. Porto, B. E. Dale, and W. Liao. 2018. “Spatial Analysis of Feedstock Supply and Logistics to Establish Regional Biogas Power Generation: A Case Study in the Region of Sicily.” Renewable and Sustainable Energy Reviews 97: 50–63. doi:10.1016/j.rser.2018.08.022.
  • Vasilca, I. S., M. Nen, O. Chivu, V. Radu, C. P. Simion, and N. Marinescu. 2021. “The Management of Environmental Resources in the Construction Sector: An Empirical Model.” Energies 14 (9): 2489. doi:10.3390/en14092489.
  • Vitrone, F., D. Ramos, F. Ferrando, and J. Salvad´o. 2021. “Binderless Fiberboards for Sustainable Construction. Materials, Production Methods and Applications.” Journal of Building Engineering 44: 102625. doi:10.1016/j.jobe.2021.102625.
  • Wang, H., P. C. Chiang, Y. Cai, C. Li, X. Wang, T. L. Chen, S. Wei, and Q. Huang. 2018. “Application of Wall and Insulation Materials on Green Building: A Review.” Sustainability 10 (9): 3331. doi:10.3390/su10093331.
  • Zolfaghary, P., M. Zakerinia, and H. Kazemi. 2021. “A Model for the Use of Urban Treated Wastewater in Agriculture Using Multiple Criteria Decision Making (MCDM) and Geographic Information System (GIS).” Agricultural Water Management 243: 106490. doi:10.1016/j.agwat.2020.106490.
  • Zubaryeva, A., N. Zaccarelli, C. Del Giudice, and G. Zurlini. 2012. “Spatially Explicit Assessment of Local Biomass Availability for Distributed Biogas Production via Anaerobic Co-digestion - Mediterranean Case Study.” Renew Energy 39 (1): 261–270. doi:10.1016/j.renene.2011.08.021.