Structured porous 17-PH stainless steel layer fabrication through laser powder bed fusion

References

• Abele, E., H. A. Stoffregen, M. Kniepkamp, S. Lang, and M. Hampe. 2015. “Selective Laser Melting for Manufacturing of Thin-Walled Porous Elements.” Journal of Materials Processing Technology 215 (1): 114–122. https://doi.org/10.1016/j.jmatprotec.2014.07.017.
   Web of Science ®Google Scholar
• Arisoy, C. F., G. Başman, and M. K. Şeşen. 2003. “Failure of a 17-4 PH Stainless Steel Sailboat Propeller Shaft.” Engineering Failure Analysis 10 (6): 711–717. https://doi.org/10.1016/S1350-6307(03)00041-4.
   Web of Science ®Google Scholar
• Arısoy, Y. M., L. E. Criales, T. Özel, B. Lane, S. Moylan, and A. Donmez. 2017. “Influence of Scan Strategy and Process Parameters on Microstructure and its Optimization in Additively Manufactured Nickel Alloy 625 via Laser Powder Bed Fusion.” The International Journal of Advanced Manufacturing Technology 90 (5–8): 1393–1417. https://doi.org/10.1007/s00170-016-9429-z.
   Web of Science ®Google Scholar
• Bhaduri, A. K., T. P. S. Gill, G. Srinivasan, and S. Sujith. 1999. “Optimised Post-Weld Heat Treatment Procedures and Heat Input for Welding 17-4PH Stainless Steel.” Science and Technology of Welding and Joining 4 (5): 295–301. https://doi.org/10.1179/136217199101537905.
   Web of Science ®Google Scholar
• Bhavar, V., P. Kattire, V. Patil, S. Khot, K. Gujar, and R. Singh, 2017, “A Review on Powder Bed Fusion Technology of Metal Additive Manufacturing,” Additive Manufacturing Handbook: Product Development for the Defense Industry, 4th International conference and exhibition on Additive Manufacturing Technologies, Banglore. 251–261.
   Google Scholar
• Carrigy, N. B., L. M. Pant, S. Mitra, and M. Secanell. 2013. “Knudsen Diffusivity and Permeability of PEMFC Microporous Coated Gas Diffusion Layers for Different Polytetrafluoroethylene Loadings.” Journal of the Electrochemical Society 160 (2): F81–F89. https://doi.org/10.1149/2.036302jes.
   Web of Science ®Google Scholar
• Chen, Z., Y. Lu, F. Luo, S. Zhang, P. Wei, S. Yao, and Y. Wang. 2022. “Effect of Laser Scanning Speed on the Microstructure and Mechanical Properties of Laser-Powder-Bed-Fused K418 Nickel-Based Alloy.” Materials 15 (9): 3045. https://doi.org/10.3390/ma15093045.
   PubMed Web of Science ®Google Scholar
• Dass, A., and A. Moridi. 2019. “State of the Art in Directed Energy Deposition: From Additive Manufacturing to Materials Design.” Coatings 9 (7): 418. https://doi.org/10.3390/coatings9070418.
   Web of Science ®Google Scholar
• Dev Singh, D., T. Mahender, and A. Raji Reddy. 2021. “Powder Bed Fusion Process: A Brief Review.” 2nd International Conference Manufacturing, Materials Science & Engineering, August 7–8, 2020, Medchal (M), Hyderabad, India, Elsevier Ltd. 350–355.
   Google Scholar
• Dhanesh, M., A. Dhanawade, and S. G. A. Bhatwadekar. 2017. “A Review on Types of Powder Bed Fusion Process in Additive Manufacturing Technology.” International Journal of Engineering Technology Science and Research 4 (11): 2394–3386.
   Google Scholar
• Dong, Z., Y. Liu, W. Wen, J. Ge, and J. Liang. 2018. “Effect of Hatch Spacing on Melt Pool and As-Built Quality During Selective Laser Melting of Stainless Steel: Modeling and Experimental Approaches.” Materials 12 (1): 50. https://doi.org/10.3390/ma12010050.
   PubMed Web of Science ®Google Scholar
• Faghri, A. 2014. “Heat Pipes: Review, Opportunities and Challenges.” Frontiers in Heat Pipes 5 (1). https://doi.org/10.5098/fhp.5.1.
   Google Scholar
• Garcia-Cabezon, C., C. G. Hernández, M. A. Castro-Sastre, A. I. Fernandez-Abia, M. L. Rodriguez-Mendez, and F. Martin-Pedrosa. 2023. “Heat Treatments of 17-4 PH SS Processed by SLM to Improve its Strength and Biocompatibility in Biomedical Applications.” Journal of Materials Research and Technology 26:3524–3543. https://doi.org/10.1016/j.jmrt.2023.08.104.
   Google Scholar
• Gostick, J. T., M. W. Fowler, M. D. Pritzker, M. A. Ioannidis, and L. M. Behra. 2006. “In-Plane and Through-Plane Gas Permeability of Carbon Fiber Electrode Backing Layers.” Journal of Power Sources 162 (1): 228–238. https://doi.org/10.1016/j.jpowsour.2006.06.096.
   Web of Science ®Google Scholar
• Gotoh, R., B. I. Furst, S. N. Roberts, S. Cappucci, T. Daimaru, and E. T. Sunada. 2022. “Experimental and Analytical Investigations of AlSi10mg, Stainless Steel, Inconel 625 and Ti-6Al-4V Porous Materials Printed via Powder Bed Fusion.” Progress in Additive Manufacturing 7 (5): 943–955. https://doi.org/10.1007/s40964-022-00269-8.
   Google Scholar
• Gu, H., H. Gong, D. Pal, K. Rafi, T. Starr, and B. Stucker, 2013, “Influences of Energy Density on Porosity and Microstructure of Selective Laser Melted 17-4PH Stainless Steel,” 24th International SFF Symposium - An Additive Manufacturing Conference, SFF 2013, 24th Annual International Solid Freeform Fabrication Symposium, University of Texas in Austin, 474–489.
   Google Scholar
• Gülcan, O., K. Günaydın, and A. Tamer. 2021. “The State of the Art of Material Jetting—A Critical Review.” Polymers 13 (16): 2829. Polymers (Basel), 13(16). https://doi.org/10.3390/polym13162829.
   PubMed Web of Science ®Google Scholar
• Hinkelmann, K., ed. 2012. Design and analysis of experiments, volume 3: special designs and applications. John Wiley & Sons.
   Google Scholar
• Huang, L., Y. Cao, H. Zhao, Y. Li, Y. Wang, and L. Wei. 2022. “Effect of Process Parameters on Density and Mechanical Behaviour of a Selective Laser Melted 17-4PH Stainless Steel Alloy.” Open Physics 20 (1): 66–77. https://doi.org/10.1515/phys-2022-0008.
   Web of Science ®Google Scholar
• Huang, L. S., and J. Che. 2008. “Analysis of Variance, Coefficient of Determination and F-Test for Local Polynomial Regression.” Annals of Statistics 36 (5): 2085–2109. https://doi.org/10.1214/07-AOS531.
   Web of Science ®Google Scholar
• Hu, Z., H. Zhu, H. Zhang, and X. Zeng. 2017. “Experimental Investigation on Selective Laser Melting of 17-4PH Stainless Steel.” Optics & Laser Technology 87:17–25. https://doi.org/10.1016/j.optlastec.2016.07.012.
   Web of Science ®Google Scholar
• Kazior, J., A. Szewczyk-Nykiel, T. Pieczonka, M. Hebda, and M. Nykiel. 2013. “Properties of Precipitation Hardening 17-4 PH Stainless Steel Manufactured by Powder Metallurgy Technology.” Advanced Materials Research 811:87–92. https://doi.org/10.4028/www.scientific.net/AMR.811.87.
   Google Scholar
• Lee, H. J., V. H. Dao, Y. W. Ma, J. M. Yu, and K. B. Yoon. 2020. “Effects of Process Parameters on the High Temperature Strength of 17-4PH Stainless Steel Produced by Selective Laser Melting.” Journal of Mechanical Science and Technology 34 (8): 3261–3272. https://doi.org/10.1007/s12206-020-0718-y.
   Web of Science ®Google Scholar
• Lin, X., Y. Cao, X. Wu, H. Yang, J. Chen, and W. Huang. 2012. “Microstructure and Mechanical Properties of Laser Forming Repaired 17-4PH Stainless Steel.” Materials Science and Engineering: A 553:80–88. https://doi.org/10.1016/j.msea.2012.05.095.
   Web of Science ®Google Scholar
• Li, Y.-H., L.-J. Rong, and Y.-Y. Li. 2001. “Pore Characteristics of Porous NiTi Alloy Fabricated by Combustion Synthesis.” Journal of Alloys and Compounds 325 (1–2): 259–262. https://doi.org/10.1016/S0925-8388(01)01382-2.
   Web of Science ®Google Scholar
• Liu, B., B. Q. Li, and Z. Li. 2019. “Selective Laser Remelting of an Additive Layer Manufacturing Process on AlSi10mg.” Results Physics 12:982–988. https://doi.org/10.1016/j.rinp.2018.12.018.
   Web of Science ®Google Scholar
• Lu, C., and J. Shi. 2022. “Relative Density and Surface Roughness Prediction for Inconel 718 by Selective Laser Melting: Central Composite Design and Multi-Objective Optimization.” The International Journal of Advanced Manufacturing Technology 119 (5–6): 3931–3949. https://doi.org/10.1007/s00170-021-08388-2.
   Web of Science ®Google Scholar
• Mahmoudi, M., A. Elwany, A. Yadollahi, S. M. Thompson, L. Bian, and N. Shamsaei. 2017. “Mechanical Properties and Microstructural Characterization of Selective Laser Melted 17-4 PH Stainless Steel.” Rapid Prototyping Journal 23 (2): 280–294. https://doi.org/10.1108/RPJ-12-2015-0192.
   Web of Science ®Google Scholar
• Mangal, P., L. M. Pant, N. Carrigy, M. Dumontier, V. Zingan, S. Mitra, and M. Secanell. 2015. “Experimental Study of Mass Transport in PEMFCs: Through Plane Permeability and Molecular Diffusivity in GDLs.” Electrochimica acta 167:160–171. https://doi.org/10.1016/j.electacta.2015.03.100.
   Web of Science ®Google Scholar
• Oliveira, J. P., A. D. LaLonde, and J. Ma. 2020. “Processing Parameters in Laser Powder Bed Fusion Metal Additive Manufacturing.” Materials & Design 193:108762. https://doi.org/10.1016/j.matdes.2020.108762.
   Web of Science ®Google Scholar
• Pant, L. M., S. K. Mitra, and M. Secanell. 2012. “Absolute Permeability and Knudsen Diffusivity Measurements in PEMFC Gas Diffusion Layers and Micro Porous Layers.” Journal of Power Sources 206:153–160. https://doi.org/10.1016/j.jpowsour.2012.01.099.
   Web of Science ®Google Scholar
• Piedra-Cascón, W., V. R. Krishnamurthy, W. Att, and M. Revilla-León. 2021. “3D Printing Parameters, Supporting Structures, Slicing, and Post-Processing Procedures of Vat-Polymerization Additive Manufacturing Technologies: A Narrative Review.” Journal of Dentistry 109:103630. https://doi.org/10.1016/j.jdent.2021.103630.
   PubMed Web of Science ®Google Scholar
• Ponnusamy, P., S. H. Masood, D. Ruan, S. Palanisamy, R. A. Rahman Rashid, and O. A. Mohamed, 2020, “Mechanical Performance of Selective Laser Melted 17-4 PH Stainless Steel Under Compressive Loading,” Solid Freeform Fabrication 2017: Proceedings of the 28th Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, SFF 2017, Proceedings of the 28th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference, University of Texas in Austin, 321–331.
   Google Scholar
• Raj, S. V., L. J. Ghosn, B. A. Lerch, M. Hebsur, L. M. Cosgriff, and J. Fedor. 2007. “Mechanical Properties of 17-4PH Stainless Steel Foam Panels.” Materials Science and Engineering: A 456 (1–2): 305–316. https://doi.org/10.1016/j.msea.2006.11.142.
   Web of Science ®Google Scholar
• Ravichander, B. B., C. Favela, A. Amerinatanzi, and N. Shayesteh Moghaddam. 2021. “A Framework for the Optimization of Powder-Bed Fusion Process.” SPIE - The International Society for Optical Engineering 11589:118–123.
   Google Scholar
• Shi, W., J. Li, Y. Jing, Y. Liu, Y. Lin, and Y. Han. 2022. “Combination of Scanning Strategies and Optimization Experiments for Laser Beam Powder Bed Fusion of Ti‐6Al‐4V Titanium Alloys.” Applied Sciences (Switzerland) 12 (13): 6653. https://doi.org/10.3390/app12136653.
   Web of Science ®Google Scholar
• Shim, D. 2021. “Effects of Process Parameters on Additive Manufacturing of Aluminum Porous Materials and Their Optimization Using Response Surface Method.” Journal of Materials Research and Technology 15:119–134. sik. https://doi.org/10.1016/j.jmrt.2021.08.010.
   Google Scholar
• Shukla, S., F. Wei, M. Mandal, J. Zhou, M. S. Saha, J. Stumper, and M. Secanell. 2019. “Determination of PEFC Gas Diffusion Layer and Catalyst Layer Porosity Utilizing Archimedes Principle.” Journal of the Electrochemical Society 166 (15): F1142–F1147. https://doi.org/10.1149/2.0251915jes.
   Web of Science ®Google Scholar
• Singh, R., A. Gupta, O. Tripathi, S. Srivastava, B. Singh, A. Awasthi, S. K. Rajput, P. Sonia, P. Singhal, and K. K. Saxena, 2019, “Powder Bed Fusion Process in Additive Manufacturing: An Overview,” Materials Today: Proceedings, Elsevier Ltd, 3058–3070.
   Google Scholar
• Singh, G., J. M. Missiaen, D. Bouvard, and J. M. Chaix. 2021. “Copper Extrusion 3D Printing Using Metal Injection Moulding Feedstock: Analysis of Process Parameters for Green Density and Surface Roughness Optimization.” Additive Manufacturing 38:101778. https://doi.org/10.1016/j.addma.2020.101778.
   Web of Science ®Google Scholar
• Spierings, A. B., G. Levy, and K. Wegener. 2014. “Designing Material Properties Locally with Additive Manufacturing Technology SLM.” InSolid freeform fabrication symposium 2012. ETH-Zürich.
   Google Scholar
• Spierings, A. B., M. Schneider, and R. Eggenberger. 2011. “Comparison of Density Measurement Techniques for Additive Manufactured Metallic Parts.” Rapid Prototyping Journal 17 (5): 380–386. https://doi.org/10.1108/13552541111156504.
   Web of Science ®Google Scholar
• Stamp, R., P. Fox, W. O’Neill, E. Jones, and C. Sutcliffe. 2009. “The Development of a Scanning Strategy for the Manufacture of Porous Biomaterials by Selective Laser Melting.” Journal of Materials Science: Materials in Medicine 20 (9): 1839–1848. https://doi.org/10.1007/s10856-009-3763-8.
   PubMed Web of Science ®Google Scholar
• Sun, C., Y. Wang, M. D. McMurtrey, N. D. Jerred, F. Liou, and J. Li. 2021. “Additive Manufacturing for Energy: A Review.” Applied Energy 282:116041. https://doi.org/10.1016/j.apenergy.2020.116041.
   Web of Science ®Google Scholar
• Tamez, M. B. A., and I. Taha. 2021. “A Review of Additive Manufacturing Technologies and Markets for Thermosetting Resins and Their Potential for Carbon Fiber Integration.” Additive Manufacturing 37:101748. https://doi.org/10.1016/j.addma.2020.101748.
   Web of Science ®Google Scholar
• Vaezi, M., H. Seitz, and S. Yang. 2013. “A Review on 3D Micro-Additive Manufacturing Technologies.” The International Journal of Advanced Manufacturing Technology 67 (5–8): 1721–1754. https://doi.org/10.1007/s00170-012-4605-2.
   Web of Science ®Google Scholar
• Verhoef, L. A., B. W. Budde, C. Chockalingam, B. García Nodar, and A. J. M. van Wijk. 2018. “The Effect of Additive Manufacturing on Global Energy Demand: An Assessment Using a Bottom-Up Approach.” Energy Policy 112:349–360. https://doi.org/10.1016/j.enpol.2017.10.034.
   Web of Science ®Google Scholar
• Vilanova, M., R. Escribano‐garcía, T. Guraya, and M. S. Sebastian. 2020. “Optimizing Laser Powder Bed Fusion Parameters for IN‐738LC by Response Surface Method.” Materials 13 (21): 1–12. https://doi.org/10.3390/ma13214879.
   Web of Science ®Google Scholar
• Wu, J. H., and C. K. Lin. 2002. “Tensile and Fatigue Properties of 17-4 PH Stainless Steel at High Temperatures.” Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 33 (6): 1715–1724. https://doi.org/10.1007/s11661-002-0180-8.
   Web of Science ®Google Scholar
• Yang, K. T., M. K. Kim, D. Kim, and J. Suhr. 2021. “Investigation of Laser Powder Bed Fusion Manufacturing and Post-Processing for Surface Quality of As-Built 17-4PH Stainless Steel.” Surface Technology 422:127492. https://doi.org/10.1016/j.surfcoat.2021.127492.
   Google Scholar
• Zai, L., C. Zhang, Y. Wang, W. Guo, D. Wellmann, X. Tong, and Y. Tian. 2020. “Laser Powder Bed Fusion of Precipitation-Hardened Martensitic Stainless Steels: A Review.” Metals (Basel) 10 (2): 255. https://doi.org/10.3390/met10020255.
   Web of Science ®Google Scholar
• Zhang, Y., L. Wu, X. Guo, S. Kane, Y. Deng, Y. G. Jung, J. H. Lee, and J. Zhang. 2018. “Additive Manufacturing of Metallic Materials: A Review.” Journal of Materials Engineering and Performance 27 (1): 1–13. https://doi.org/10.1007/s11665-017-2747-y.
   Web of Science ®Google Scholar
• Zheng, Z., L. Peng, and D. Wang. 2021. “Defect Analysis of 316 L Stainless Steel Prepared by LPBF Additive Manufacturing Processes.” Coatings 11 (12): 1562. https://doi.org/10.3390/coatings11121562.
   Web of Science ®Google Scholar
• Ziaee, M., and N. B. Crane. 2019. “Binder Jetting: A Review of Process, Materials, and Methods.” Additive Manufacturing 28:781–801. https://doi.org/10.1016/j.addma.2019.05.031.
   Web of Science ®Google Scholar
• Zou, Y., and J. Malzbender. 2016. “Development and Optimization of Porosity Measurement Techniques.” Ceramics International 42 (2): 2861–2870. https://doi.org/10.1016/j.ceramint.2015.11.015.
   Web of Science ®Google Scholar