What are the hygrothermal consequences of applying exterior air barriers in timber frame construction in Europe?

References

• Aho, H., J. Vinha, and M. Korpi. 2008. “Implementation of Airtight Constructions and Joints in Residential Buildings.” 8th Nordic building physics symposium, Copenhagen, Denmark.
   Google Scholar
• Black, C. D. 2006. “Mould Resistance of Full Scale Wood Frame.” Master thesis, University of Waterloo, USA.
   Google Scholar
• Bories, S. 1987. “Natural Convection in Porous Media.” In Advances in Transport Phenomena in Porous Media, vol. 128. edited by J. Bear and M. Y. Corapcioglu, 77–141. Hingham, Massachusetts: Martinus Nijhoff.
   Google Scholar
• Brown, W. C., M. T. Bomberg, J. M. Ullett, and J. Rasmussen. 1993. “Measured Thermal Resistance of Frame Walls with Defects in the Installation of Mineral Fibre Insulation.” Journal of Building Physics 16 (4): 318–339. doi: 10.1177/109719639301600404
   Google Scholar
• Derome, D. 2005. “Moisture Accumulation in Cellulose Insulation Caused by Air Leakage in Flat Wood Frame Roofs.” Journal of Thermal Envelope and Building Science 28 (3): 269–287.
   Google Scholar
• Desta, T. Z., J. Langmans, and S. Roels. 2011. “Experimental Data Set for Validation of Heat, Air and Moisture Transport Models of Building Envelopes.” Building and Environment 46 (5): 1038–1046. doi: 10.1016/j.buildenv.2010.11.002
   Web of Science ®Google Scholar
• Geving, S., A. Karagiozis, and M. Salonvaara. 1997. “Measurements and Two-dimensional Computer Simulations of the Hygrothermal Performance of a Wood Frame Wall.” Journal of Building Physics 20 (4): 301–319. doi: 10.1177/109719639702000404
   Google Scholar
• Grunewald, J. 1997. “Diffusive and Convective Mass and Energy Transport in Capillary Porous Building Materials.” PhD thesis, University of Technology Dresden, Germany (in German).
   Google Scholar
• Hagentoft, C. E. 1991. “Forced and Natural Convection Coupled with Heat Conduction in Walls with Air Gaps.” Proceedings of the seventh international conference of numerical methods in thermal problems, Standford, CA.
   Google Scholar
• Hagentoft, C.-E. 2002. “HAMSTAD: WP2: Benchmark Package.” Technical Report, University of Technology, Chalmers, Gothenburg, Sweden.
   Google Scholar
• Hagentoft, C.-E., and E. Harderup. 1993. “Reference Years for Moisture Calculations.” Technical Report, T2-S-94/01, IEA Annex 24, HAMTIE and Lund University, Department of Building Physics, Report TVBH-7171.
   Google Scholar
• Hens, H. 2010. Applied Building Physics: Boundary Conditions, Building Performance and Material Properties. Berlin: Ernst & Sohn Verlag Gmbh (a John Wiley Company).
   Google Scholar
• Holøs, S. B., and T.-O. Relander. 2010. “Airtightness Measurements of Wood Frame Low Energy Row Houses.” 2nd building enclosure science and technology conference, Portland, 1–11.
   Google Scholar
• Hukka, A., and H. A. Viitanen. 1999. “A Mathematical Model of Mould Growth on Wooden Material.” Wood Science and Technology 33 (6): 475–485. doi: 10.1007/s002260050131
   Web of Science ®Google Scholar
• Janssen, H. 1997. “Thermal Performance of Highly Insulated Wood Frame Walls.” Master thesis, Norwegian University of Science and Technology, Norway.
   Google Scholar
• Janssen, H., and S. Roels. 2009. “Qualitative and Quantitative Assessment of Interior Moisture Buffering by Enclosures.” Energy and Buildings 41 (4): 382–394. doi: 10.1016/j.enbuild.2008.11.007
   Web of Science ®Google Scholar
• Janssens, A. 1998. “Reliable Control of Interstitial Condensation in Lightweight Roof Systems: Calculation and Assessment Methods.” PhD thesis, Department of Civil Engineering, KU Leuven, Belgium.
   Google Scholar
• Janssens, A. 2003. “Hygrische Studie Koud Dak Met Cellulose-isolatie.” Technical Report, Ugent, Ghent, Belgium.
   Google Scholar
• Janssens, A., and H. Hens. 2007. “Effects of Wind on the Transmission Heat Loss in Duo-pitched Insulated Roofs: A Field Study.” Energy and Buildings 39 (9): 1047–1054. doi: 10.1016/j.enbuild.2006.10.016
   Web of Science ®Google Scholar
• Jokisalo, J., J. Kurnitski, M. Korpi, T. Kalamees, and J. Vinha. 2009. “Building Leakage, Infiltration, and Energy Performance Analyses for Finnish Detached Houses.” Building and Environment 44 (2): 377–387. doi: 10.1016/j.buildenv.2008.03.014
   Web of Science ®Google Scholar
• Kalamees, T. 2007. “Air Tightness and Air Leakages of New Lightweight Single-family Detached Houses in Estonia.” Building and Environment 42 (6): 2369–2377. doi: 10.1016/j.buildenv.2006.06.001
   Web of Science ®Google Scholar
• Kohonen, R. 1984. “Transient Analysis of the Thermal and Moisture Physical Behaviour of Building Constructions.” Building and Environment 19 (1): 1–11. doi: 10.1016/0360-1323(84)90008-8
   Web of Science ®Google Scholar
• Kronvall, J. 1980. “Air Flows in Building Components.” PhD thesis, Lund Institute of Technology, Sweden.
   Google Scholar
• Langmans, J. 2013. “Feasibility of Exterior Air Barriers in Light Weight Construction.” Phd thesis, KU Leuven. http://bwk.kuleuven.be/bwf/PhDs/phdLangmans
   Google Scholar
• Langmans, J., R. Klein, M. De Paepe, and S. Roels. 2010. “Potential of Wind Barriers to Assure Airtightness of Wood-Frame Low Energy Constructions.” Energy and Buildings 42 (12): 2376–2385. doi: 10.1016/j.enbuild.2010.08.021
   Web of Science ®Google Scholar
• Langmans, J., R. Klein, and S. Roels. 2012. “Hygrothermal Risks of Using Exterior Air Barrier Systems for Highly Insulated Light Weight Walls: A Laboratory Investigation.” Building and Environment 56 (10): 192–202. doi: 10.1016/j.buildenv.2012.03.007
   Web of Science ®Google Scholar
• Langmans, J., R. Klein, and S. Roels. 2013. “Numerical and Experimental Investigation of the Hygrothermal Response of Timber Frame Walls with an Exterior Air Barrier.” Journal of Building Physics 36 (4): 375–397. doi: 10.1177/1744259112473934
   Web of Science ®Google Scholar
• Langmans, J., A. Nicolai, R. Klein, and S. Roels. 2012. “A Quasi-Steady State Implementation of Air Convection in a Transient Heat and Moisture Building Component Model.” Building and Environment 58 (12): 208–218. doi: 10.1016/j.buildenv.2012.07.011
   Web of Science ®Google Scholar
• Lecompte, J. 1989. “The Influence of Natural Convection on the Thermal Quality of Insulated Cavity Walls Constructions.” PhD thesis, Department of Civil Engineering, KU Leuven, Belgium (in Dutch).
   Google Scholar
• Li, Q., J. Rao, and P. Fazio. 2009. “Development of HAM Tool for Building Envelope Analysis.” Building and Environment 44 (5): 1065–1073. doi: 10.1016/j.buildenv.2008.07.017
   Web of Science ®Google Scholar
• Myhre, L., and T. Aurlien. 2005. “Measured Airtightness in Low-Energy Houses.” 7th Nordic building physics symposium, Reykjavik, Iceland.
   Google Scholar
• Nicolai, A. 2007. “Modelling and Numerical Simulation of Salt Transport and Phase Transitions in Unsaturated Porous Building Materials.” PhD thesis, Syracuse University, Syracuse, NY.
   Google Scholar
• Nore, K. 2009. “Hygrothermal Performance of Ventilated Wooden Cladding.” PhD thesis, Norwegian University of Science and Technology, Norway.
   Google Scholar
• Økland, Ø. 1998. “Convection in Highly-insulated Building Structures.” PhD thesis, Norwegian University of Science and Technology, Trondheim, Norway.
   Google Scholar
• Piecková, E., and Z. Jesenská. 1996. “Microscopic Fungi in Dwellings and Their Health Implications.” Annals of Agricultural and Environmental Medicine 6 (1): 1–11.
   Google Scholar
• Reboux, G., A. Bellanger, S. Roussel, F. Grenouilllet, and L. Millon. 2010. “Moulds in Dwellings: Health Risks and Involved Species.” Revue des Maladies Respiratoires 27 (2): 118–121 (in French). doi: 10.1016/j.rmr.2009.09.003
   Web of Science ®Google Scholar
• Roels, S., P. Talukdar, C. James, and C. J. Simonson. 2010. “Reliability of Material Data Measurements for Hygroscopic Buffering.” International Journal of Heat and Mass Transfer 53 (23–24): 5355–5363. doi: 10.1016/j.ijheatmasstransfer.2010.07.020
   Web of Science ®Google Scholar
• Saeid, N. H., and I. Pop. 2004. “Transient Free Convection in a Square Cavity Filled with a Porous Medium.” International Journal of Heat and Mass Transfer 47 (8–9): 1917–1924. doi: 10.1016/j.ijheatmasstransfer.2003.10.014
   Web of Science ®Google Scholar
• Sedlbauer, D. K. 2001. “Prediction of Mould Growth on and in Building Components.” PhD thesis, University of Stuttgart, Germany (in German).
   Google Scholar
• Silberstein, A., and H. Hens. 1996. “Effects of Air and Moisture Flows on the Thermal Performance of Insulations in Ventilated Roofs and Walls.” Journal of Building Physics 19 (4): 367–385. doi: 10.1177/109719639601900406
   Google Scholar
• Stranger, M., S. Verbeke, L. Verbeke, F. Geyskens, R. Swinnen, E. Goelen, M. Taubel, et al. 2012. “Exploratory Research on the Quality of the Indoor Environment in Energy Efficient Buildings: The Influence of Outdoor Environment and Ventilation.” Technical Report, VITO-LNE.
   Google Scholar
• Swami, M., and S. Chandra. 1987. “Procedures for Calculating Natural Ventilation Airflow Rates in Buildings.” Technical Report, FSEC-CR-163-86, Florida Solar Energy Center, Cape Canaveral, FL.
   Google Scholar
• Tariku, F., K. Kumaran, and P. Fazio. 2010. “Transient Model for Coupled Heat, Air and Moisture Transfer Through Multilayered Porous Media.” International Journal of Heat and Mass Transfer 53 (15–16): 3035–3044. doi: 10.1016/j.ijheatmasstransfer.2010.03.024
   Web of Science ®Google Scholar
• Tenwolde, A., and W. B. Rose. 1996. “Moisture Control Strategies for the Building Envelope.” Journal of Building Physics 19 (3): 206–214. doi: 10.1177/109719639601900302
   Google Scholar
• Thue, J. V., H. B. Skogstad, and A. Homb. 1996. “Wood Frame Walls in Cold Climate – Vapour Barrier Requirements.” Journal of Building Physics 20 (1): 63–75. doi: 10.1177/109719639602000106
   Google Scholar
• Uvsløkk, S. 1996. “The Importance of Wind Barriers for Insulated Timber Frame Constructions.” Journal of Building Physics 20 (1): 40–62. doi: 10.1177/109719639602000105
   Google Scholar
• Van den Brande, T., B. Blocken, and S. Roels. 2013. “Rain Water Runoff from Porous Building Facades: Implementation and Application of a First-Order Runoff Model Coupled to a HAM Model.” Building and Environment 64 (6): 177–186. doi: 10.1016/j.buildenv.2013.03.014
   Web of Science ®Google Scholar
• Vereecken, E., and S. Roels. 2012. “Review of Mould Prediction Models and Their Influence on Mould Risk Evaluation.” Building and Environment 51 (5): 296–310. doi: 10.1016/j.buildenv.2011.11.003
   Web of Science ®Google Scholar
• Vereecken, E., S. Roels, and H. Janssen. 2011. “In Situ Determination of the Moisture Buffer Potential of Room Enclosures.” Journal of Building Physics 34 (3): 223–246. doi: 10.1177/1744259109358268
   Web of Science ®Google Scholar
• Vinha, J. 2007. “Hygrothermal Performance of Timber-Framed External Walls in Finnish Climatic Conditions: A Method of Determining a Sufficient Water Vapour Resistance of the Internal Lining of a Wall Assembly.” PhD thesis, Tampere University, Finland.
   Google Scholar
• Weber, J. E. 1975. “The Boundary-Layer Regime for Convection in a Vertical Porous Layer.” International Journal of Heat and Mass Transfer 18 (4): 569–573. doi: 10.1016/0017-9310(75)90298-7
   Web of Science ®Google Scholar
• Yarbrough, D., and S. Wudhapitak. 1992. “Air Permeability of Loose-Fill Residential Insulations.” 8th international conference on thermal insulation, Millbrae, CA, 8–14.
   Google Scholar
• Zillig, W. 2009. “Moisture Transport in Wood Using a Multiscale Approach.” PhD thesis, Department of Civil Engineering, KU Leuven, Belgium.
   Google Scholar