Positioning of an isothermal heat storage layer in a building wall exposed to the external environment

References

• Almeida, F., D. Zhang, A. S. Fung, and W. H. Leong. 2011. “ Comparison of Corrective Phase Change Material Algorithm with ESP-r Simulation.” 12th Conference of IBPSA, Sydney.
   Google Scholar
• Cabeza, L. F., A. Castell, C. Barrenechea, A. De Gracia, and A. I. Fernández. 2011. “Materials Used as PCM in Thermal Energy Storage in Buildings.” Renewable and Sustainable Energy Reviews 15: 1675–1695. doi: 10.1016/j.rser.2010.11.018
   Web of Science ®Google Scholar
• Carbonari, A., M. De Grassi, C. Di Perna, and P. Principi. 2006. “Numerical and Experimental Analyses of PCM Containing Sandwich Panels for Prefabricated Walls.” Energy and Buildings 38: 472–483. doi: 10.1016/j.enbuild.2005.08.007
   Web of Science ®Google Scholar
• Clarke, A. J. 2001. Energy Simulation in Building Design. 2nd ed. Oxford: Butterworth-Heinemann.
   Google Scholar
• Heim, D., and J. A. Clarke. 2004. “Numerical Modeling and Thermal Simulation of PCM-gypsum Composite with ESP-r.” Energy and Buildings 36: 795–805. doi: 10.1016/j.enbuild.2004.01.004
   Web of Science ®Google Scholar
• Idelson, S. R., M. A. Stori, and L. A. Crivelli. 1994. “Numerical Methods in Phase-change Problems.” Archives of Computational Methods in Engineering 1: 49–74. doi: 10.1007/BF02736180
   Google Scholar
• Jin, X., M. A. Medina, and X. Zhang. 2013. “On the Importance of the Location of PCMs in Building Walls for Enhanced Thermal Performance.” Applied Energy 106: 72–78. doi: 10.1016/j.apenergy.2012.12.079
   Web of Science ®Google Scholar
• Kalagasidis, A. S. 2014. “A Multi-level Modelling and Evaluation of Thermal Performance of Phase-change Materials in Buildings.” Journal of Building Performance Simulation 7 (4): 289–308. doi: 10.1080/19401493.2013.764547
   Web of Science ®Google Scholar
• Koschenz, M., and B. Lehmann. 2004. “Development of a Thermally Activated Ceiling Panel with PCM for Application in Lightweight and Retrofitted Buildings.” Energy and Buildings 36 (6): 567–578. doi: 10.1016/j.enbuild.2004.01.029
   Web of Science ®Google Scholar
• Kosny, J. 2014. “ PCM-Enhanced Building Components: An Application of Phase Change Materials in Building Envelopes and Internal Structures.” Series: Engineering Materials and Processes, Springer.
   Google Scholar
• Kosny, J., A. Fallahi, N. Shukla, E. Kossecka, and R. Ahbari. 2014. “Thermal Load Mitigation and Passive Cooling in Residential Attics Containing PCM-enhanced Insulations.” Solar Energy 108: 164–177. doi: 10.1016/j.solener.2014.05.007
   Web of Science ®Google Scholar
• Kosny, J., E. Kossecka, A. Brzezinski, A. Tleoubaev, and D. Yarbrough. 2012. “Dynamic Thermal Performance Analysis of Fiber Insulations Containing Bio-based Phase Change Materials (PCMs).” Energy and Buildings 52: 122–131. doi: 10.1016/j.enbuild.2012.05.021
   Web of Science ®Google Scholar
• Kuznik, F., J. Virgone, and K. Johannes. 2010. “Development and Validation of a New TRNSYS Type for the Simulation of External Building Walls Containing PCM.” Energy and Buildings 42: 1004–1009. doi: 10.1016/j.enbuild.2010.01.012
   Web of Science ®Google Scholar
• Lee, K. O., M. A. Medina, E. Raith, and X. Sun. 2015. “Assessing the Integration of a Thin Phase Change Material (PCM) Layer in a Residential Building Wall for Heat Transfer Reduction and Management.” Applied Energy 137: 699–706. doi: 10.1016/j.apenergy.2014.09.003
   Web of Science ®Google Scholar
• Machniewicz, A., and D. Heim. 2014. “Investigation of PCM Layer Position in a Thermal Insulation Component Semi-exposed to External Environment.” Proceedings of Second IBPSA – England conference in association with CIBSE, BSO 14, June 23–24.
   Google Scholar
• Medina, M. A., J. B. King, and M. Zhang. 2008. “On the Heat Transfer Rate Reduction of Structural Insulated Panels (SIPs) Outfitted with Phase Change Materials (PCMs).” Energy 33: 667–678. doi: 10.1016/j.energy.2007.11.003
   Web of Science ®Google Scholar
• Mehling, H., and L. F. Cabeza. 2008. Heat and cold storage with PCM, Heat and Mass Transfer. Berlin: Springer.
   Google Scholar
• Pomianowski, M., P. Heiselberg, R. L. Jensen, R. Cheng, and Y. Zhang. 2014. “A New Experimental Method to Determine Specific Heat Capacity of Inhomogeneous Concrete Material with Incorporated Microencapsulated-PCM.” Cement and Concrete Research 55: 22–34. doi: 10.1016/j.cemconres.2013.09.012
   Web of Science ®Google Scholar
• Pomianowski, M., P. Heiselberg, and Y. Zhang. 2013. “Review of Thermal Energy Storage Technologies Based on PCM Application in Buildings.” Energy and Buildings 67: 56–69. doi: 10.1016/j.enbuild.2013.08.006
   Web of Science ®Google Scholar
• Rodriguez-Ubinas, E., L. Ruiz-Valero, S. Vega, and J. Neila. 2012. “Applications of Phase Change Material in Highly Energy-efficient Houses.” Energy and Buildings 50: 49–62. doi: 10.1016/j.enbuild.2012.03.018
   Web of Science ®Google Scholar
• Silva, T., R. Vicentea, N. Soares, and v. Ferreira. 2012. “Experimental Testing and Numerical Modelling of Masonry Wall Solution with PCM Incorporation: A Passive Construction Solution.” Energy and Buildings 49: 235–245. doi: 10.1016/j.enbuild.2012.02.010
   Web of Science ®Google Scholar
• Soares, N., J. J. Costa, A. R. Gaspar, and P. Santos. 2013. “Review of Passive PCM Latent Heat Thermal Energy Storage Systems Towards Buildings’ Energy Efficiency.” Energy and Buildings 59: 82–103. doi: 10.1016/j.enbuild.2012.12.042
   Web of Science ®Google Scholar
• Trigui, A., M. Karkri, and I. Krupa. 2014. “Thermal Conductivity and Latent Heat Thermal Energy Storage Properties of LDPE/wax as a Shape-stabilized Composite Phase Change Material.” Energy Conversion and Management 77: 586–596. doi: 10.1016/j.enconman.2013.09.034
   Web of Science ®Google Scholar
• Tyagi, V. V., and D. Buddhi. 2007. “PCM Thermal Storage in Buildings: A State of Art.” Renewable and Sustainable Energy Reviews 11: 1146–1166. doi: 10.1016/j.rser.2005.10.002
   Web of Science ®Google Scholar
• Virgone, K. J., F. Kuznik, X. Wang, T. Haavi, and G. Fraisse. 2011. “ Annex 23: Applying Energy Storage in Buildings of the Future – Development of Sustainable Energy Storage Designs for a Variety of Ultra-Low Energy Building Thermal, Phase Change Materials and Electrical Storage Options.” ftp://ftp.tech-env.com/pub/PERD%20deliverables/Annex%2023_Subtask_C_Report.pdfftp://ftp.tech-env.com/pub/PERD%20deliverables/Annex%2023_Subtask_C_Report.pdf
   Google Scholar
• Wang, J., E. Long, W. Qin, and L. Xu. 2013. “Ultrathin Envelope Thermal Performance Improvement of Prefab House by Integrating with Phase Change Material.” Energy and Buildings 67: 210–216. doi: 10.1016/j.enbuild.2013.08.029
   Web of Science ®Google Scholar
• Zhu, N., P. Hu, and L. Xu. 2013. “A Simplified Dynamic Model of Double Layers Shape-stabilized Phasechange Materials Wallboards.” Energy and Buildings 67: 508–516. doi: 10.1016/j.enbuild.2013.08.043
   Web of Science ®Google Scholar