A numerical model to simulate the dynamic performance of Breathing Walls

References

• Alongi, A., Angelotti, A., and Mazzarella, L. 2017a. “Experimental Investigation of the Steady State Behaviour of Breathing Walls by Means of a Novel Laboratory Apparatus.” Building and Environment 123: 415–426. doi:10.1016/j.buildenv.2017.07.013.
   Web of Science ®Google Scholar
• Alongi, A., Angelotti, A., and and Mazzarella, L. 2017b. “Analytical Modelling of Breathing Walls: Experimental Verification by Means of the Dual Air Vented Thermal Box Lab Facility.” Energy Procedia 140: 36–47. doi:10.1016/j.egypro.2017.11.121.
   Google Scholar
• Alongi, A., Angelotti, A., and Mazzarella, L. 2019. “Measuring a Breathing Wall’s Effectiveness and Dynamic Behaviour.” Indoor and Built Environment. doi:10.1177/1420326X19836457.
   PubMed Web of Science ®Google Scholar
• Alongi, A., Angelotti, A., and Mazzarella, L. 2020. “Experimental Validation of a Steady Periodic Analytical Model for Breathing Walls.” Building and Environment 168: 106509. doi:10.1016/j.buildenv.2019.106509.
   Web of Science ®Google Scholar
• Alongi, A., and Mazzarella, L. 2015a. “Characterization of Fibrous Insulating Materials in Their Application in Dynamic Insulation Technology.” Energy Procedia 78: 537–542. doi: 10.1016/j.egypro.2015.11.732.
   Google Scholar
• Alongi, A., and Mazzarella, L. 2015b. “The Dual Air Vented Thermal Box: A Laboratory Apparatus to Test Air Permeable Building Envelope Technologies.” Energy Procedia 78: 1543–1548. doi:10.1016/j.egypro.2015.11.198.
   Google Scholar
• Ascione, F. 2017. “Energy Conservation and Renewable Technologies for Buildings to Face the Impact of the Climate Change and Minimize the Use of Cooling.” Solar Energy 154: 34–100. doi:10.1016/j.solener.2017.01.022.
   Web of Science ®Google Scholar
• Ascione, F., Bianco, N., De Stasio, C., Mauro, G. M., and Vanoli, G. P. 2015. “Dynamic Insulation of the Building Envelope: Numerical Modeling Under Transient Conditions and Coupling With Nocturnal Free Cooling.” Applied Thermal Engineering 84: 1–14.
   Web of Science ®Google Scholar
• Baker, P. H. 2003. “The Thermal Performance of a Prototype Dynamically Insulated Wall.” Building Services Engineering Research and Technology 24: 25–34. doi:10.1191/0143624403bt057oa.
   Google Scholar
• Brunsell, J. T. 1996. “The Performance of Dynamic Insulation in Two Residential Buildings.” Air Infiltration Review 16: 7–11.
   Google Scholar
• Craig, S., and Grinham, J. 2017. “Breathing Walls: The Design of Porous Materials for Heat Exchange and Decentralized Ventilation.” Energy and Buildings 149: 246–259.
   Web of Science ®Google Scholar
• Di Giuseppe, E., D’Orazio, M., and Di Perna, C. 2015. “Thermal and Filtration Performance Assessment of a Dynamic Insulation System.” Energy Procedia 78: 513–518.
   Google Scholar
• Dimoudi, A., Androutsopoulos, A., and Lykoudis, S. 2004. “Experimental Work on a Linked, Dynamic and Ventilated Wall Component.” Energy and Buildings 36: 443–453.
   Web of Science ®Google Scholar
• Elsarrag, E., Al-Horr, Y., and Imbabi, M. S. 2012. “Improving Building Fabric Energy Efficiency in Hot-Humid Climates Using Dynamic Insulation.” Building Simulation 5: 127–134. doi:10.1007/s12273-012-0067-6.
   Web of Science ®Google Scholar
• Gan, G. 2000. “Numerical Evaluation of Thermal Comfort in Rooms With Dynamic Insulation.” Building and Environment 35: 445–453.
   Web of Science ®Google Scholar
• Gradeci, K., Berardi, U., Time, B., and Köhler, J. 2018. “Evaluating Highly Insulated Walls to Withstand Biodeterioration: A Probabilistic-Based Methodology.” Energy and Buildings 177: 112–124. doi:10.1016/j.enbuild.2018.07.059.
   Web of Science ®Google Scholar
• Imbabi, M. S. 2004. “New Developments in the Science and Art of Breathing Walls.” Proceedings from WREC 2004: World Renewable energy Congress VIII, Denver, CO, September 1–8.
   Google Scholar
• Imbabi, M. S. 2006. “Modular Breathing Panels for Energy Efficient, Healthy Building Construction.” Renewable Energy 31: 729–738.
   Web of Science ®Google Scholar
• Imbabi, M. S. 2012. “A Passive–Active Dynamic Insulation System for All Climates.” International Journal of Sustainable Built Environment 1: 247–258.
   Google Scholar
• Imbabi, M. S., Brown, A. R., Peacock, A., and Murphy, J. 2008. “The Transforming Technology of Dynamic Breathing Building.” In: Miller, K., and Register, R.,  Ecocity World Summit 2008 Proceedings, Ecocity Builders, 1–12. San Francisco, UC Berkeley Extension.
   Google Scholar
• Kalagasidis, A. S., Rode, C., and Woloszyn, M. 2008. “HAM-Tools – A Whole Building Simulation Tool in Annex 41.” In Proceedings of the IEA ECBCS Annex 41 Closing Seminar, edited by C. Rode, H. Hens, and H. Janssen, 21–35. Copenhagen, Technical University of Denmark, Department of Civil Engineering.
   Google Scholar
• Kaviany, M. 1995. Principle of Heat Transfer in Porous Media. 2nd ed. New York: Springer.
   Google Scholar
• Krarti, M. 1994. “Effect of Air Flow on Heat Transfer in Walls.” Journal of Solar Energy Engineering 116: 35–42.
   Web of Science ®Google Scholar
• Park, B., Srubar, W. V., and Krarti, M. 2015. “Energy Performance Analysis of Variable Thermal Resistance Envelopes in Residential Buildings.” Energy and Buildings 103: 317–325. doi:10.1016/j.enbuild.2015.06.061.
   Web of Science ®Google Scholar
• Rupp, S., and Krarti, M. 2019. “Analysis of Multi-Step Control Strategies for Dynamic Insulation Systems.” Energy and Buildings 204: 109459.
   Web of Science ®Google Scholar
• Samuel, A., Imbabi, M. S., Peacock, A., and Strachan, P. A. 2003. “An Engineering Approach to Modelling of Dynamic Insulation Using ESP-r.” In Proceedings of the Worldwide CIBSE/ASHRAE Building Sustainability, Value and Profit Conference, 1–6. Chartered Institute of Building Service Engineers (CIBSE).
   Google Scholar
• Steeman, M., Janssens, A., Steeman, H. J., Van Belleghem, M., and De Paepe, M. 2010. “On Coupling 1D Non-Isothermal Heat and Mass Transfer in Porous Materials With a Multizone Building Energy Simulation Model.” Building and Environment 45: 865–877. doi:10.1016/j.buildenv.2009.09.006.
   Web of Science ®Google Scholar
• Taylor, B. J., Cawthorne, D. A., and Imbabi, M. S. 1996. “Analytical Investigation of the Steady-State Behaviour of Dynamic and Diffusive Building Envelopes.” Building and Environment 31: 519–525.
   Web of Science ®Google Scholar
• Taylor, B. J., and Imbabi, M. S. 1998. “The Application of Dynamic Insulation in Buildings.” Renewable Energy 15: 377–382.
   Web of Science ®Google Scholar
• Taylor, B. J., Webster, R., and Imbabi, M. S. 1999. “The Building Envelope as an Air Filter.” Building and Environment 34: 353–361.
   Web of Science ®Google Scholar
• UNI/TR 10349-2:2016. Ente Italiano di Normazione, Riscaldamento e raffrescamento degli edifici – Dati climatici – Parte 2: Dati di progetto.
   Google Scholar
• Wallenten, P. 1995. “Analytical and Numerical Analysis of Dynamic Insulation.” Proceedings of the Building Simulation 1995, Session 7a: Heat Transfer, 555–562.
   Google Scholar
• Wang, J., Du, Q., Zhang, C., Xu, X., and Gang, W. 2018. “Mechanism and Preliminary Performance Analysis of Exhaust Air Insulation for Building Envelope Wall.” Energy & Buildings 173: 516–529.
   Web of Science ®Google Scholar
• Wong, J. M., Glasser, F. P., and Imbabi, M. S. 2007. “Evaluation of Thermal Conductivity in Air Permeable Concrete for Dynamic Breathing Wall Construction.” Cement & Concrete Composites 29: 647–655.
   Web of Science ®Google Scholar
• Yaegashi, A., Hiyama, K., Kato, S., Tezuka, J., and Nikawa, S. 2015. “Thermal Performance Evaluation of a Dynamic Insulation Technology Applied to a Timber Framework House in a Real Environment.” Journal of Asian Architecture and Building Engineering 14: 213–218.
   Web of Science ®Google Scholar
• Zheng, C., and Bennett, G. D. 2002. Applied Contaminant Transport Modeling. 2nd ed. New York, Wiley.
   Google Scholar