Geometric design of metered on-ramps: state-of-the-practice and remaining challenges

References

• AASHTO. 1954. A Policy on Geometric Design of Rural Highways. Washington, D.C: American Association of State Highway Officials.
   Google Scholar
• AASHTO. 1965. A Policy on Geometric Design of Rural Highways. Washington, D.C: American Association of State Highway Officials.
   Google Scholar
• AASHTO. 2011. A Policy on Geometric Design of Highways and Streets. Washington, D.C: American Association of State Highway and Transportation Officials.
   Google Scholar
• ADOT. 2003. Ramp Meter Design, Operations, and Maintenance Guidelines. Phoenix, AZ: Arizona Department of Transportation.
   Google Scholar
• Arasan, V. T., and S. S. Arkatkar. 2010. “Modeling Heterogeneous Traffic Flow on Upgrades of Intercity Roads.” Transport 25 (2): 129–137. doi:10.3846/transport.2010.16.
   Web of Science ®Google Scholar
• Balke, K., P. Chaudhary, P. Songchitruksa, and G. Pesti. 2009a. Development of Criteria and Guidelines for Installing, Operating, and Removing TxDOT Ramp Control Signals. Report No. FHWA/TX-09/0-5294-1, Austin, TX: Texas Department of Transportation.
   Google Scholar
• Balke, K., P. Chaudhary, P. Songchitruksa, and G. Pesti. 2009b. Warrants for Installing and Operating Ramp Metering - Project Summary: 0-5294. Austin, TX: Texas Department of Transportation.
   Google Scholar
• Burley, M., and J. Gaffney. 2010. Freeway Ramp Signals Handbook. Victoria, Australia: VicRoads.
   Google Scholar
• Caltrans. 2012. Highway Design Manual. Sacramento, CA: California Department of Transportation.
   Google Scholar
• Caltrans. 2016. Ramp Meter Design Manual. Sacramento, CA: California Department of Transportation.
   Google Scholar
• Cambridge Systematics, Inc. 2001. Twin Cities Ramp Meter Evaluation – Final Report. Oakland, CA.
   Google Scholar
• Chaudhary, N. A., and C. J. Messer. 2000. Design Criteria for Ramp-metering: Appendix to TxDOT Roadway Design Manual. Report No. 2121-3, College Station, TX: Texas Transportation Institute.
   Google Scholar
• Chaudhary, N. A., and C. J. Messer. 2001. Ramp-metering Design and Operations Guidelines for Texas. College Station, TX: Texas Transportation Institute.
   Google Scholar
• Chow, P., and A. M. Dunnet. 1978. Evaluation of Ramp Control on the Santa Monica Freeway in Los Angeles. Sacramento, CA: California Department of Transportation.
   Google Scholar
• Deen, T. B. 1957. “Acceleration Lane Lengths for Heavy Commercial Vehicles.” Traffic Engineering 27 (5): 212–217.
   Google Scholar
• Dowling, R., A. Skabardonis, and V. Alexiadis. 2004. Traffic Analysis Toolbox Volume III: Guidelines for Applying Traffic Microsimulation Software. Report No. FHWA-HRT-04-040, Washington, DC.
   Google Scholar
• Fartash, H., M. Hadi, Y. Xiao, T. Wang, and R. Ponnaluri. 2017. “Assessing Need for Systemwide Ramp-metering Installation Warrants.” Transportation Research Record 2616: 27–38. doi:10.3141/2616-04.
   Google Scholar
• FHWA. 2009. Manual on Uniform Traffic Control Devices. Washington, D.C: Federal Highway Administration.
   Google Scholar
• Fitzpatrick, K., and K. Zimmerman. 2007. “Potential Updates to 2004 Green Book’s Acceleration Lengths for Entrance Terminals.” Transportation Research Record 2023: 130–139. doi:10.3141/2023-14.
   Google Scholar
• Gan, A., K. Liu, P. Alluri, and X. Zhu. 2011. Integrated Database and Analysis System for the Evaluation of Freeway Corridors for Potential Ramp Signaling. Tallahassee, FL: Florida Department of Transportation.
   Google Scholar
• Gattis, J., M. Bryant, and L. Duncan. 2008. Acceleration Lane Design for Higher Truck Volumes. Fayetteville, AR: Mack-Blackwell Transportation Center.
   Google Scholar
• Gillespie, T. D. 1986. “Start-Up Accelerations of Heavy Trucks on Grades.” Transportation Research Record 1052: 107–112.
   Google Scholar
• Harwood, D. W., D. J. Torbic, K. R. Richard, et al. 2003. Review of Truck Characteristics as Factors in Highway Design. NCHRP Report 505, Washington, DC: Transportation Research Board.
   Google Scholar
• Hassan, Y., T. A. Sayed, and A. M. Ahammed. 2006. “Effect of Geometry of Entrance Terminals on Freeway Merging Behavior.” Proceedings of the 85th Annual Meeting of the Transportation Research Board, Washington, D.C.
   Google Scholar
• Hourdakis, J., and P. G. Michalopoulos. 2002. “Evaluation of Ramp Control Effectiveness in Two Twin Cities Freeways.” Transportation Research Record 1811: 21–29. doi:10.3141/1811-03.
   Google Scholar
• Hunter, M., R. Machemehl, and A. Tsyganov. 2001. “Operational Evaluation of Freeway Ramp Design.” Transportation Research Record 1751: 90–100. doi:10.3141/1751-11.
   Google Scholar
• Hunter, M., and R. B. Machemehl. 1997. Re-Evaluation of Ramp Design Speed Criteria: Review of Practice and Data Collection Plan. Report No. FHWA/TX-98/1732-1, Austin, TX: University of Texas.
   Google Scholar
• Jain, M., S. Arkatkar, and G. Joshi. 2014. “Studying Effect of Weight-To-Power Ratio on Acceleration Profile of Trucks under Varying Gradient Conditions.” Proceedings of the Eastern Asia Society for Transportation Studies, Cebu, Philippines.
   Google Scholar
• Kraft, W. H., ed. 2009. Traffic Engineering Handbook. 6th ed. Washington, D.C: Institute of Transportation Engineers.
   Google Scholar
• Lee, C., B. Hellingab, and K. Ozbay. 2006. “Quantifying Effects of Ramp-metering on Freeway Safety.” Accident Analysis and Prevention 38 (2): 279–288. doi:10.1016/j.aap.2005.09.011.
   PubMed Web of Science ®Google Scholar
• Lee, I., R. Jiang, and E. Chung. 2013. “Traffic Queue Estimation for Metered Motorway On-Ramps through Use of Loop Detector Time Occupancies.” Transportation Research Record 2396: 45–53. doi:10.3141/2396-06.
   Google Scholar
• Liu, H. X., X. Wu, and P. G. Michalopoulos. 2007. “Improving Queue Size Estimation for Minnesota’s Stratified Zone Metering Strategy.” Transportation Research Record 2012: 38–46. doi:10.3141/2012-05.
   Google Scholar
• Long, G. 2000. “Acceleration Characteristics of Starting Vehicles.” Transportation Research Record 1737: 58–70. doi:10.3141/1737-08.
   Google Scholar
• Loutzenheiser, D. W., B. D. Greenshields, and J. A. Buchanan. 1938. “Speed-Change Rates of Passenger Vehicles.” The 18th Annual Meeting, Highway Research Board, Washington, D.C.
   Google Scholar
• Magalotti, M. J. 2011. Freeway Ramp Management in Pennsylvania. Report No. FHWA-PA-2011-005-PIT007, Harrisburg, PA: Pennsylvania Department of Transportation.
   Google Scholar
• Mizuta, A., K. Roberts, L. Jacobsen, and N. Thompson. 2014. Ramp-metering: A Proven, Cost-Effective Operational Strategy – A Primer. Report No. FHWA-HOP-14-020, U.S, Washington, DC: Department of Transportation.
   Google Scholar
• MnDOT. 2007. Freeway Corridor Traffic Management, Traffic Engineering Manual. St. Paul, MN: Minnesota Department of Transportation.
   Google Scholar
• NDOT. 2006. Managed Lanes and Ramp-metering Design Manual, Part 3: Design Manual. Carson City, NV: Nevada Department of Transportation.
   Google Scholar
• NYSDOT. 1998. Highway Design Manual, Chapter 24 – Mobility Measures, Revision 32. Albany, NY: New York State Department of Transportation.
   Google Scholar
• Oto, R. 1988. Vehicle Acceleration Tests. Sacramento, CA: California Department of Transportation.
   Google Scholar
• Papamichail, I., and M. Papageorgiou. 2011. “Balancing Of Queues or Waiting Times on Metered Dual-branch On-ramps.” Ieee Transactions on Intelligent Transportation Systems 12 (2): 438-452. doi:10.1109/TITS.2010.2093130.
   Web of Science ®Google Scholar
• Proctor, C., W. Grimes, D. Fournier, and J. Rigol. 1995. Analysis of Acceleration in Passenger Cars and Heavy Trucks. SAE Technical Paper 950136, DOI: 10.4271/950136.
   Google Scholar
• Sanchez, R. O., R. Horawitz, and P. Varaiya. 2011. “Analysis of Queue Estimation Methods Using Wireless Magnetic Sensors.” Transportation Research Record 2229: 34–45. doi:10.3141/2229-05.
   Google Scholar
• Sharma, S., and C. J. Messer. 1994. Distance Requirements for Ramp-metering. College Station, TX: Texas Transportation Institute.
   Google Scholar
• Spiliopoulou, A. D., D. Manolis, I. Papamichail, and M. Papageorgiou. 2010. “Queue Management Techniques for Metered Freeway On-ramps.” Transportation Research Record 2178: 40–48. doi:10.3141/2178-05.
   Google Scholar
• St. John, A. D., and D. R. Kobett. 1978. Grade Effects on Traffic Flow Stability and Capacity. NCHRP Report 185, Washington, DC: Transportation Research Board.
   Google Scholar
• Sun, X., and R. Horowitz. 2006. “Set of New Traffic-Responsive Ramp-Metering Algorithms and Microscopic Simulation Results.” Transportation Research Record 1959: 9–18. doi:10.3141/1959-02.
   Google Scholar
• Tian, Z., H. Xu, G. Yang, A. Khan, and Y. Zhao. 2016. Queue Storage and Acceleration Lane Length Design at Metered On-ramps in California. Report No. CA16-2449, Sacramento, CA: California Department of Transportation.
   Google Scholar
• Torbic, D. J., J. M. Hutton, C. D. Bokenkroger, and M. A. Brewer. 2012. “Design Guidance for Freeway Mainline Ramp Terminal.” Transportation Research Record 2309: 48–60. doi:10.1177/0361198118758394.
   Google Scholar
• Vigos, G., M. Papageorgiou, and Y. Wang. 2006. A Ramp Queue Length Estimation Algorithm. Toronto, Canada:IEEE Intelligent Transportation Systems Proceedings. 418–425. doi:10.1109/ITSC.2006.1706777.
   Google Scholar
• Vigos, G., M. Papageorgiou, and Y. Wang. 2008. “Real-time Estimation of Vehicle-count within Signalized Links.” Transportation Research Part C 16 (1): 48–60. doi:10.1016/j.trc.2007.06.002.
   Web of Science ®Google Scholar
• Wang, Z. 2013a. “Queue Storage Design for Metered On-Ramps.” International Journal of Transportation Science and Technology 2 (1): 47–64. doi:10.1260/2046-0430.2.1.47.
   Google Scholar
• Wang, Z. 2013b. “Ramp-metering Status in California.” International Journal of Transportation Science and Technology 2 (4): 337–350. doi:10.1260/2046-0430.2.4.337.
   Google Scholar
• WisDOT. 2000. Intelligent Transportation System (ITS) Design Manual. Madison, WI: Wisconsin Department of Transportation.
   Google Scholar
• WisDOT. 2006. Wisconsin Statewide Ramp Control Plan. Madison, MI: Wisconsin Department of Transportation.
   Google Scholar
• Wu, J., X. Jin, and A. J. Horawitz. 2008. “Methodologies for Estimating Vehicle Queue Length at Metered On-Ramps.” Transportation Research Record 2047: 75–82. doi:10.3141/2047-09.
   Google Scholar
• Wu, J., X. Jin, A. J. Horawitz, and D. Gong. 2009. “Experiment to Improve Estimation of Vehicle Queue Length at Metered On-Ramps.” Transportation Research Record 2099: 30–38. doi:10.3141/2099-04.
   Google Scholar
• Yagar, S., and M. V. Aerde. 1983. “Geometric and Environmental Effects on Speeds of 2-lane Highways.” Transportation Research Part A: General 17 (4): 315–325. doi:10.1016/0191-2607(83)90094-8.
   Google Scholar
• Yang, G. 2017. “Acceleration Characteristics Study and Acceleration Lane Length Design for Metered Ramps.” Ph.D. Dissertation, University of Nevada, Reno, NV.
   Google Scholar
• Yang, G., H. Xu, Z. Tian, and Z. Wang. 2016b. “Vehicle Speed and Acceleration Profile Study for Metered On-Ramps in California.” Journal of Transportation Engineering 142 (2): 04015046. doi:10.1061/(ASCE)TE.1943-5436.0000817.
   Google Scholar
• Yang, G., H. Xu, Z. Tian, Z. Wang, and Y. Zhao. 2015. “Acceleration Characteristics at Metered On-ramps.” Transportation Research Record 2484: 1–9. doi:10.3141/2484-01.
   Google Scholar
• Yang, G., H. Xu, Z. Wang, and Z. Tian. 2016c. “Truck Acceleration Behavior Study and Acceleration Lane Length Recommendations for Metered On-ramps.” International Journal of Transportation Science and Technology 5 (2): 93–102. doi:10.1016/j.ijtst.2016.09.006.
   Google Scholar
• Yang, G., R. Yue, Z. Tian, and H. Xu. 2018b. “Modeling the Impacts of Traffic Flow Arrival Profiles on Ramp-Metering Queues.” Transportation Research Record 2672 (15): 85–92. doi:10.1177/0361198118782253.
   Web of Science ®Google Scholar
• Yang, G., and Z. Tian. 2019. “An Exploratory Investigation of the Impact of Ramp Metering on Driver Acceleration Behavior.” IATSS Research. doi:10.1016/j.iatssr.2019.03.002.
   Web of Science ®Google Scholar
• Yang, G., Z. Tian, D. Wang, and H. Xu. 2018c. “Queue Length Estimation for a Metered On-ramp Using Mesoscopic Simulation.” Transportation Letters: The International Journal of Transportation Research 1–10. doi:10.1080/19427867.2018.1477491.
   Web of Science ®Google Scholar
• Yang, G., Z. Tian, H. Xu, et al. 2018a. “Impacts of Traffic Flow Arrival Pattern on the Necessary Queue Storage Space at Metered On-Ramps.” Transportmetrica A: Transport Science 14 (7): 534–561. doi:10.1080/23249935.2017.1387875.
   Web of Science ®Google Scholar
• Yang, G., Z. Tian, H. Xu, and D. Wang. 2016a. “Queue Length Estimation for Metered Freeway-to-Freeway Connectors.” Journal of Advanced Transportation 50 (8): 1912–1924. doi:10.1002/atr.1436.
   Web of Science ®Google Scholar
• Yang, G., Z. Tian, H. Xu, and Z. Wang. 2016d. “Recommendations to Acceleration Lane Lengths at Metered On-Ramps.” Transportation Research Record 2588: 1–11. doi:10.3141/2588-01.
   Google Scholar
• Yang, G., Z. Tian, Z. Wang, H. Xu, and R. Yue. 2019. “Investigating the Impact of On-Ramp Traffic Flow Arrival Profile on Queue Length at Metered On-Ramps.” Journal of Transportation Engineering, Part A: System 145 (2). doi:10.1061/JTEPBS.0000211.
   Web of Science ®Google Scholar
• Yang, G., Z. Wang, H. Xu, and Z. Tian. 2018d. “Feasibility of Using a Constant Acceleration Rate for Freeway Entrance Ramp Acceleration Lane Length Design.” Journal of Transportation Engineering, Part A: System 144 (3). doi:10.1061/JTEPBS.0000122.
   Web of Science ®Google Scholar