References
- AASHTO (American Association of State Highway and Transportation Officials). 2001. Policy on Geometric Design of Highways and Streets. Washington, DC: American Association of State Highway and Transportation Officials.
- Abdel-Aty, M., K. Haleem, R. Cunningham, and V. Gayah. 2009. “Application of Variable Speed Limits and Ramp Metering to Improve Safety and Efficiency of Freeways.” 2nd International Symposium on Freeway and Tollway Operations, Hawaii, June 21-24.
- Ahn, S., and M. Cassidy 2007. “Freeway Traffic Oscillations and Vehicle Lane-change Manoeuvers.” Proceedings of the 17th International Symposium on Transportation and Traffic Theory, Amsterdam: Elsevier, 691–710.
- Calvert, S. C., and M. M. Minderhoud 2012. “Generic Freeway Weaving Section Capacity Estimation through Micro-simulation.” In: TRB 91th Annual Meeting Compendium of Papers, Washington, DC.
- Chu, T. D., T. Miwa, and T. Morikawa, 2015. “Gap Acceptance on Urban Expressway Merging Sections: An Application of Inverse Time to Collision.” In: TRB 94th Annual Meeting Compendium of Papers, Washington, DC.
- Daganzo, C. F. 2002. “A Behavioral Theory of Multi-lane Traffic Flow. Part II: Merges and the Onset of Congestion.” Transportation Research B 36: 159–169. doi:10.1016/S0191-2615(00)00043-6.
- Eikenbroek, O. A. 2013. “Integrated traffic control with variable speed limits and coordinated ramp metering based on traffic stability.” PhD diss., University of Twente.
- Elefteriadou, L., R. P. Roess, and W. R. McShane. 1995. “The Probabilistic Nature of Breakdown at Freeway-merge Junctions.” Transportation Research Record: Journal of the Transportation Research Board 1484 (1995): 80–89.
- Federal Highway Administration, 2017. “Traffic Congestion and Reliability: Linking Solutions to Problems.” U.S. Department of Transportation, Washington D.C., USA. https://ops.fhwa.dot.gov/congestion_report_04/chapter4.htm
- Gu, X., M. Abdel-Aty, Q. Xiang, Q. Cai, and J. Yuan. 2019. “Utilizing UAV Video Data for In-depth Analysis of Drivers’ Crash Risk at Interchange Merging Areas.” Accident Analysis Prevention 123: 159–169. doi:10.1016/j.aap.2018.11.010.
- Laval, J. A., and C. F. Daganzo. 2006. “Lane-changing in Traffic Streams.” Transportation Research Part B: Methodological 40 (3): 251–264. doi:10.1016/j.trb.2005.04.003.
- Lertworawanich, L., and L. Elefteriadou. 2003. “A Methodology for Estimating Capacity at Ramp Weaves Based on Gap Acceptance and Linear Optimization.” Transportation Research Part B: Methodological 37 (5): 459–483. doi:10.1016/S0191-2615(02)00024-3.
- Li, D., and P. Ranjitkar. 2013. “Assessing Ramp Metering and Variable Speed Limit Strategies for Auckland Motorway.” Journal of the Eastern Asia Society for Transportation Studies 10 (2013): 1856–1871.
- Lin, P. W., K. P. Kang, and G. L. Chang. 2004. “Exploring the Effectiveness of Variable Speed Limit Controls on Highway Work-zone Operations.” Journal of Intelligent Transportation Systems 8 (3): 155–168. doi:10.1080/15472450490492851.
- Lu, X.-Y., P. Varaiya, R. Horowitz, D. Su, and S. Shladover. 2011. “Novel Freeway Traffic Control with Variable Speed Limit and Coordinated Ramp Metering.” Transportation Research Record: Journal of the Transportation Research Board 2229 (2011): 55–65. doi:10.3141/2229-07.
- Ma, J., B. L. Smith, and M. D. Fontaine. 2016. “Comparison of In-vehicle Auditory Public Traffic Information with Roadside Dynamic Message Signs.” Journal of Intelligent Transportation Systems 20 (3): 244–254. doi:10.1080/15472450.2015.1062729.
- Meel, I. P., U. Brannolte, D. Satirasetthavee, and K. Kanitpong. 2017. “Safety Impact of Application of Auxiliary Lanes at Downstream Locations of Thai U-turns.” IATSS Research 41 (1): 1–11. doi:10.1016/j.iatssr.2016.06.002.
- Miller-Hooks, E., M. Tariverdi, and X. Zhang. 2012. Standardizing and Simplifying Safety Service Patrol Benefit-cost Ratio Estimation. College Park: University of Maryland.
- MnDOT (Minnesota Department of Transportation) and CS Inc. (Cambridge Systematics, Inc.). 2001. Twin Cities Ramp Metering Evaluation Final Report. Oakland: Cambridge Systematics.
- Papamichail, I., K. Kampitaki, M. Papageorgiou, and A. Messmer. 2008. “Integrated Ramp Metering and Variable Speed Limit Control of Motorway Traffic Flow.” IFAC Proceedings Volumes 41 (2): 14084–14089. doi:10.3182/20080706-5-KR-1001.02384.
- Park, H., C. S. Bhamidipati, and B. L. Smith. 2011. “Investigating Lane-level Variable Speed Limit Implementation in Freeway Operations.” 90th Annual Meeting of the Transportation Research Board, Washington, DC, January 23-27.
- Rios-Torres, J., and A. A. Malikopoulos. 2017. “A Survey on the Coordination of Connected and Automated Vehicles at Intersections and Merging at Highway On-ramps.” IEEE Transactions on Intelligent Transportation Systems 18 (5): 1066–1077. doi:10.1109/TITS.2016.2600504.
- TRB (Transportation Research Board). 2010. Highway Capacity Manual. Washington, DC: Transportation Research Board, National Research Council.
- Wan, X., P. J. Jin, F. Yang, and B. Ran. 2014. “Modeling Vehicle Interactions during Freeway Ramp Merging in Congested Weaving Section.” Transportation Research Record: Journal of the Transportation Research Board 2421 (2014): 82–92. doi:10.3141/2421-10.
- Weng, J., S. Xue, Y. Yang, X. Yan, and X. Qu. 2015. “In-depth Analysis of Drivers’ Merging Behavior and Rear-end Crash Risks in Work Zone Merging Areas.” Accident Analysis Prevention 77: 51–61. doi:10.1016/j.aap.2015.02.002.
- Yi, H., and T. E. Mulinazzi. 2007. “Urban Freeway On-ramps: Invasive Influences on Mainline Operations.” Transportation Research Record: Journal of the Transportation Research Board 2023 (2017): 112–119. doi:10.3141/2023-12.