Publication Cover
Transportation Letters
The International Journal of Transportation Research
Volume 14, 2022 - Issue 1
221
Views
4
CrossRef citations to date
0
Altmetric
Article

Estimation of critical gap of U-turns at uncontrolled median openings considering Iran’s driver behavior

, , &

References

  • Abhigna, D., D. P. Brahmankar, and K. V. R. Ravishankar. 2020. “Multi Vehicle-Type Right Turning Gap-Acceptance and Capacity Analysis at Uncontrolled Urban Intersections.” Periodica Polytechnica Transportation Engineering 48 (2): 99–108. doi:https://doi.org/10.3311/PPtr.9744.
  • Adebisi, O. 1982. “Driver Gap Acceptance Phenomena.” Transportation Engineering Journal of ASCE 108 (6): 676–688.
  • Amin, P., P. Patel, and A. Amin. 2018. Analysis of Critical Gap Approaches at Four Legged Median Separated Uncontrolled Intersection in case of Heterogeneous Traffic Condition.
  • Ashalatha, R., and S. Chandra. 2011. “Critical Gap through Clearing Behavior of Drivers at Unsignalised Intersections.” KSCE Journal of Civil Engineering 15 (8): 1427–1434. doi:https://doi.org/10.1007/s12205-011-1392-5.
  • Ashworth, R., and B. Green. 1966. “Gap Acceptance at an Uncontrolled Intersection.” Traffic Engineering and Control 7 (11): 676–678.
  • Barchański, A. (2019). “Analysis of Critical Gap Times and Follow-Up Times at Selected, Median, Uncontrolled T-Intersections Differentiated by the Nature of the Surrounding.” Paper presented at the Scientific And Technical Conference Transport Systems Theory And Practice.
  • Currin, T. R. 2012. Introduction to Traffic Engineering: A Manual for Data Collection and Analysis. Cengage Learning.
  • Dash, S., S. S. Mohapatra, and P. P. Dey. 2019. “Estimation of Critical Gap of U-turns at Uncontrolled Median Openings.” Transportation Letters 11 (5): 229–240. doi:https://doi.org/10.1080/19427867.2017.1288890.
  • Drew, D. R., L. R. LaMotte, J. Buhr, and J. Wattleworth. 1967. “Gap Acceptance in the Freeway Merging Process.” Highway Research Record 208: 1–36.
  • Gupta, A., S. Mondal, and V. K. Sharma. 2018. “Modelling U-turning Behaviour of Vehicles at Mid-block Median Opening in Multilane Urban Roads.” Curr Sci Indian Acad Sci 114 (7): 1461–1473.
  • Khan, M. R., R. S. Chalumuri, and V. Senapathi. 2015. “Modelling of the Gap Phenomena at U-turn Provisions on the Median Openings of Inter-urban Highway Corridors.” Journal of the Eastern Asia Society for Transportation Studies 11: 1842–1856.
  • Liu, P., J. J. Lu, and B. Cao. 2009. “Capacity of U-turns at Unsignalized Median Openings on Six-lane Streets.” Transportation Research Record 2130 (1): 59–65. doi:https://doi.org/10.3141/2130-08.
  • Liu, P., J. J. Lu, F. Hu, and G. Sokolow. 2008. “Capacity of U-turn Movement at Median Openings on Multilane Highways.” Journal of Transportation Engineering 134 (4): 147–154. doi:https://doi.org/10.1061/(ASCE)0733-947X(2008)134:4(147).
  • Liu, P., X. Qu, H. Yu, W. Wang, and B. Cao. 2012. “Development of a VISSIM Simulation Model for U-turns at Unsignalized Intersections.” Journal of Transportation Engineering 138 (11): 1333–1339. doi:https://doi.org/10.1061/(ASCE)TE.1943-5436.0000438.
  • Liu, P., X. Wang, J. Lu, and G. Sokolow. 2007. “Headway Acceptance Characteristics of U-turning Vehicles at Unsignalized Intersections.” Transportation Research Record 2027 (1): 52–57. doi:https://doi.org/10.3141/2027-07.
  • Ma, W., and J. Zhao. 2019. “Investigating Gap Acceptance Behavior at Two-way Stop-controlled Intersections in China.” Transportation Letters 1–11.
  • Manual, H. C. 2000. Highway Capacity Manual. Vol. 2. Washington, DC.
  • Manual, H. C. 2010. “Transportation Research Board of the National Academies.” Washington, DC 2010.
  • Miller, A., and R. Pretty. 1968. Overtaking on Two-lane Rural Roads. Retrieved from.
  • Miller, A. J. 1971. Nine Estimators of Gap-acceptance Parameters. Publication of: Traffic Flow and Transportation.
  • Miller, A. J. 1974. “A Note on the Analysis of Gap‐Acceptance in Traffic.” Journal of the Royal Statistical Society. Series C, Applied Statistics 23 (1): 66–73.
  • Mohapatra, S. S., and P. P. Dey. 2018. “Estimation of U-turn Capacity at Median Openings.” Journal of Transportation Engineering, Part A: Systems 144 (9): 04018049. doi:https://doi.org/10.1061/JTEPBS.0000174.
  • Mohapatra, S. S., P. P. Dey, and S. Chandra (2016). “Conflicting Volume for U-turns at Uncontrolled Median Openings.” Paper presented at the Proceedings of the Institution of Civil Engineers-Transport.
  • Pannela, S. K., and P. K. Bhuyan. 2017. “Modified INAFOGA Method for Critical Gap Estimation at U-turn Median Openings.” International Journal of Civil Engineering 15 (7): 967–977. doi:https://doi.org/10.1007/s40999-017-0179-6.
  • Polus, A. 1983. “Gap Acceptance Characteristics at Unsignalised Urban Intersections.” Traffic Engineering and Control 24 (5): 255–258.
  • Raff, M. S. 1950. A Volume Warrant for Urban Stop Signs.
  • Sanik, M. E., J. Prasetijo, F. Mustakim, N. B. Hamid, M. Nor, A. Hakimi, … M. Safberi. 2014. Drivers Lane Changing Behaviour at Urban Intersection by Using Gap Acceptance Approach.
  • Sharma, V. K., S. Mondal, and A. Gupta. 2017a. “Analysis of U-turning Behaviour of Vehicles at Mid-block Median Opening in Six Lane Urban Road: A Case Study.” International Journal for Traffic & Transport Engineering 7 (2): 243–255.
  • Sharma, V. K., S. Mondal, and A. Gupta. 2017b. “A Comparison of Critical Gap of U Turning Vehicles at Uncontrolled Median Opening Based on Different Methods.” Journal of the Eastern Asia Society for Transportation Studies 12: 1728–1739.
  • Sil, G., S. Mohapatra, P. Dey, and S. Chandra. 2019. “Service Delay and Merging Time Evaluation at Median Openings.” European Transport, Trasporti Europei, no. 71: 1–13.
  • Sil, G., S. S. Mohapatra, P. P. Dey, and S. Chandra. 2018. “Merging Process of U-turns at Uncontrolled Median Openings under Mixed Traffic Conditions.” Transport 33 (2): 370–379. doi:https://doi.org/10.3846/16484142.2016.1247295.
  • Troutbeck, R. 1992. Estimating the Critical Acceptance Gap from Traffic Movements. Queensland University of Technology.
  • Troutbeck, R. 1993. “Effect of Heavy Vehicles at Australian Traffic Circles and Unsignalized Intersections.” Transportation Research Record 1398: 54–60.
  • Tupper, S. M. 2011. Safety and Operational Assessment of Gap Acceptance through Large-scale Field Evaluation.
  • Yang, X., H. Zhou, J. Lu, and N. Castillo (2001). “The Gap Acceptance Study of U-turn at Median Openings.” Paper presented at the ITE 2001 Annual Meeting and ExhibitInstitute of Transportation Engineers (ITE).
  • Yusheng, C., W. Lina, P. Yulong, and L. Xianzhang. 2009. “Gap Acceptance Capacity Model for On-ramp Junction of Urban Freeway.” Journal of Transportation Systems Engineering and Information Technology 9 (4): 116–119. doi:https://doi.org/10.1016/S1570-6672(08)60076-8.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.