References
- AASHTO. 2001. A Policy on Geometric Design of Highways and Streets. 4th ed. Washington D.C.: American Association of State Highway and Transportation Officials.
- AASHTO. 2004. A Policy on Geometric Design of Highways and Streets. 5th ed. Washington D.C.: American Association of State Highway and Transportation Officials
- AASHTO. 2011. A Policy on Geometric Design of Highways and Streets. 6th ed. Washington D.C.: American Association of State Highway and Transportation Officials.
- AASHTO. 2018. A Policy on Geometric Design of Highways and Streets. 7th ed. Washington D.C.: American Association of State Highway and Transportation Officials.
- Asaithambi, G., and G. Shravani. 2017. “Overtaking Behaviour of Vehicles on Undivided Roads in Non-lane Based Mixed Traffic Conditions.” Journal of Traffic and Transportation Engineering (English Edition) 4 (3): 252–261. doi:https://doi.org/10.1016/j.jtte.2017.05.004.
- Choudhari, T., and A. Maji. 2019. “Effect of Horizontal Curve Geometry on the Maximum Speed Reduction: A Driving Simulator-Based Study.” Transportation in Developing Economies 5 (2): 14. doi:https://doi.org/10.1007/s40890-019-0082-8.
- Das, S., A. Budhkar, A. K. Maurya, and A. Maji. 2019. “Multivariate Analysis on Dynamic Car ‑ following Data of Non ‑ Lane ‑ Based Traffic Environments.” Transportation in Developing Economies 5 (2): 17. doi:https://doi.org/10.1007/s40890-019-0085-5.
- El Khoury, J., & Hobeika, A. 2007. “Incorporating uncertainty into the estimation of the passing sight distance requirements“. Computer” Aided Civil and Infrastructure Engineering, 22(5), 347–357. doi:https://doi.org/10.1111/mice.2007.22.issue-5
- Farah, H. 2013. “Modeling Drivers’ Passing Duration and Distance in a Virtual Environment.” IATSS Research 37 (1): 61–67. doi:https://doi.org/10.1016/j.iatssr.2013.03.001.
- Farah, H. 2016. “When Do Drivers Abort an Overtaking Maneuver on Two-Lane Rural Roads?” Transportation Research Record: Journal of the Transportation Research Board 2602 (1): 16–25. doi:https://doi.org/10.3141/2602-03.
- Federal Highway Administration (FHWA). 2003. Manual on Uniform Traffic Control Devices. Washington, D.C: U.S. Department of Transportation, Federal Highway Administration.
- Federal Highway Administration (FHWA). 2009. Manual on Uniform Traffic Control Devices. Washington, D.C: U.S. Department of Transportation, Federal Highway Administration.
- Fung, G., N. Yung, and G. Pang. 2003. “Camera Calibration from Road Lane Markings.” Optical Engineering 42 (10): 2967–2977. doi:https://doi.org/10.1117/1.1606458.
- Glennon, J. C. 1988. “New and Improved Model of Passing Sight Distance on Two-lane Highways.” Transportation Research Record: Journal of the Transportation Research Board 1195: 132–137. http://www.scopus.com/inward/record.url?eid=2-s2.0-0024183271&partnerID=tZOtx3y1
- Harwood, D. W., D. K. Gilmore, K. R. Richard, J. M. Dunn, and C. Sun. 2008. National Cooperative Highway Research Program Report 605: Passing Sight Distance Criteria. Washington D.C: NCHRP, TRB. doi:https://doi.org/10.17226/23278.
- Harwood, D. W., and J. C. Glennon. 1989. “Passing Sight Distance Design for Passenger Cars and Trucks.” Transportation Research Record: Journal of the Transportation Research Board 1208 (1): 59–69.
- Hassan, Y., S. M. Easa, and A. O. Abd El Halim. 1996. “Passing Sight Distance on Two-lane Highways: Review and Revision.” Transportation Research Part A: Policy and Practice 30 (6 PART A): 453–467. doi:https://doi.org/10.1016/0965-8564(95)00032-1.
- Hassein, U., and S. Easa 2016. “Field Evaluation of Passing Sight Distance Parameters. In Resilient Infrastructure”, Annual Conference of the Canadian Society for Civil Engineering (pp. 1–8). London.
- Hegeman, G., S. Hoogendoorn, and K. Brookhuis. 2004. “Observations Overtaking Manoeuvers on Bi-directional Roads.” Advanced OR and AI Methods in Transportation 1: 505–510.
- IRC: 66–1976. 1976. Recommended Practice for Sight Distance on Rural Highways. New Delhi, India: Indian Roads Congress.
- IRC: 73–1980. 1990. Geometric Design Standards for Rural (Non-urban) Highways. New Delhi, India: Indian Roads Congress. Indian Roads Congress.
- Jacob, A., and M. V. L. R. Anjaneyulu. 2013. “Operating Speed of Different Classes of Vehicles at Horizontal Curves on Two-Lane Rural Highways.” Journal of Transportation Engineering 139 (3): 287–294. doi:https://doi.org/10.1061/(ASCE)TE.1943-5436.0000503.
- Khanna, S. K., and C. E. G. Justo. 2001. Highway Engineering. Roorkee, India: Nem Chand & Bros.
- Llorca, C., and A. García. 2011. “Evaluation of Passing Process on Two-Lane Rural Highways in Spain with New Methodology Based on Video Data.” Transportation Research Record: Journal of the Transportation Research Board 2262 (1): 42–51. doi:https://doi.org/10.3141/2262-05.
- Llorca, C., and H. Farah. 2016. “Passing Behavior on Two-Lane Roads in Real and Simulated Environments.” Transportation Research Record: Journal of the Transportation Research Board 2556 (1): 29–38. doi:https://doi.org/10.3141/2556-04.
- Maji, A., G. Sil, and A. Tyagi. 2018. “85th and 98th Percentile Speed Prediction Models of Car, Light, and Heavy Commercial Vehicles for Four-Lane Divided Rural Highways.” Journal of Transportation Engineering, Part A: Systems 144 (5): 1–8. doi:https://doi.org/10.1061/JTEPBS.0000136.
- Mehar, A., S. Chandra, and S. Velmurugan. 2013. “Speed and Acceleration Characteristics of Different Types of Vehicles on Multi-lane Highways.” European Transport - Trasporti Europei, 55(1): 1825–3997. http://www.istiee.unict.it/europeantransport/papers/N55/ET_2013_55_1_Mehar.pdf
- MORTH. 2016. “Road Accidents in India 2015.” Ministry of Road Transport and Highways, Transport Research Wing, Ministry of Road Transport and Highways, Government of India, New Delhi. http://pibphoto.nic.in/documents/rlink/2016/jun/p20166905.pdf
- MORTH. 2017. Basic Road Statistics of India 2015–16. New Delhi: Ministry of Road Transport and Highways, Transport Research Wing.
- Nama, S., A. K. Maurya, A. Maji, P. Edara, and P. K. Sahu. 2016. “Vehicle Speed Characteristics and Alignment Design Consistency for Mountainous Roads.” Transportation in Developing Economies 2 (2): 23. doi:https://doi.org/10.1007/s40890-016-0028-3.
- Pérez, J., V. Milanés, E. Onieva, J. Godoy, and J. Alonso 2011. “Longitudinal Fuzzy Control for Autonomous Overtaking”. In 2011 IEEE International Conference on Mechatronics (pp. 188–193). IEEE. Istanbul, Turkey. doi:https://doi.org/10.1109/ICMECH.2011.5971279.
- Polus, A., M. Livneh, and B. Frischer. 2007. “Evaluation of the Passing Process on Two-Lane Rural Highways.” Transportation Research Record: Journal of the Transportation Research Board 1701 (1): 53–60. doi:https://doi.org/10.3141/1701-07.
- Rajalin, S., S. O. Hassel, and H. Summala. 1997. “Close-following Drivers on Two-lane Highways.” Accident Analysis and Prevention 29 (6): 723–729. doi:https://doi.org/10.1016/S0001-4575(97)00041-9.
- Sil, G., A. Maji, S. Nama, and A. K. Maurya. 2019a. “Operating Speed Prediction Model as a Tool for Consistency Based Geometric Design of Four-lane Divided Highways.” Transport 34 (4): 425–436. doi:https://doi.org/10.3846/transport.2019.10715.
- Sil, G., S. Nama, A. Maji, and A. K. Maurya. 2019b. “Effect of Horizontal Curve Geometry on Vehicle Speed Distribution: A Four-lane Divided Highway Study.” Transportation Letters 1–10. doi:https://doi.org/10.1080/19427867.2019.1695562.
- Vetters, A., and Jaehrig, T. 2015. “Verification of the existing model for passing sight distance on single two-lane rural carriageways.”; In 6th IEEE International Conference on Cognitive Infocommunications (CogInfoCom) (pp. 557–561). IEEE. Gyor, Hungary. doi:https://doi.org/10.1109/CogInfoCom.2015.7390654
- Wilson, T., and W. Best. 1982. “Driving Strategies in Overtaking.” Accident Analysis and Prevention 14 (3): 179–185. doi:https://doi.org/10.1016/0001-4575(82)90026-4.