Vertical curve design insights of road tunnels versus highways

References

• American Association of State Highway and Transportation Officials. (2011). A policy on geometric design of highways and streets. Washington, DC: Author.
   Google Scholar
• American Association of State Highway and Transportation Officials. (1984). A policy on geometric design of highway and streets. Washington, DC: Author.
   Google Scholar
• Amundsen, F. H., & Ranes, G. (2000). Studies on traffic accident in Norwegian road tunnels. Tunneling and Underground Space Technology, 15(1), 3–11.
   Web of Science ®Google Scholar
• Anundsen, F. H. (2009). Studies on Norwegian road tunnels II. An analysis on traffic accidents in road tunnels 2001–2006. Road and Traffic Department, Traffic Safety Section. (Nr TS4-2009). Oslo. Norway: Statens Vegvesen.
   Google Scholar
• Arndt, O. K., Cox, R. L., Lennie, S. C., & Whitehead, M. T. (2011). Provision of sight distance around concrete barriers and structures on freeways and interchanges. Transportation Research Record, 2262, 22–30.
   Web of Science ®Google Scholar
• Austroads. (2009). Guide to road design, part 3: Geometric design, AGRD03/09. Sydney, New South Wales: Austroads Ltd.
   Google Scholar
• Austroads. (2010). Guide to road tunnels, part 2: Planning design and commissioning. Sydney, New South Wales: Austroads Ltd.
   Google Scholar
• Bassan, S. (2012). Review and evaluation of stopping sight distance design—Cars vs. trucks. Advances in Transportation Studies-An International Journal. Special Issue 1, 5–16.
   Google Scholar
• Calvi, A., De Blasiis, M. R., & Guattari, C. (2012). An empirical study of the effects of road tunnel on driving performance. 5th International Congress—Sustainability of road infrastructures. Procedia—Social and Behavioral Sciences, 53, 1098–1108.
   Google Scholar
• Caliendo, C., De Guglielmo, M. L., & Guida, M. (2013). A crash prediction model for road tunnels. Accident Analysis and Prevention, 55, 107–115.
   PubMed Web of Science ®Google Scholar
• Chang, M. S., Messer, C. J., & Santiago, A. J. (1985). Timing traffic signal change interval based on driver behavior. Transportation Research Record, 1027, 20–30.
   Google Scholar
• Chowdhury, M. A., Warren, D. L., & Howard, B. (1991). Analysis of advisory speed setting criteria. Public Roads, 55(3), 65–71.
   Google Scholar
• Design Manual for Roads and Bridges. (1999). Highway structures design, Vol. 2, Section 2, Special Structures, Part 9, Design of Road Tunnels, BD 78/99. UK: HMSO.
   Google Scholar
• Dozza, M. (2013). What factors influence drivers' response time for evasive maneuvers in real traffic? Accident Analysis and Prevention, 58, 299–308.
   PubMed Web of Science ®Google Scholar
• Drew, D. R. (1968). Traffic flow theory and control. New York, NY: McGraw Hill.
   Google Scholar
• Durth, W., & Bernhard, M. (2000). Revised design parameters for stopping sight distance. In R. Krammes & W. Brilon (Eds.) Proceedings, 2nd International Symposium on Highway Geometric Design, pp. 410–421
   Google Scholar
• Fambro, D. B., Fitzpatrick, K., & Koppa, R. J. (1997). Determination of stopping sight distances (NCHRP Report 400). Washington, DC: Transportation Research Board, National Research Council.
   Google Scholar
• Federal Highway Administration. (2009). Technical manual for design and construction of road tunnels—Civil elements (FHWA-NHI-10-034). Washington, DC: Federal Highway Administration.
   Google Scholar
• Green, M. (2000). How long does it take to stop? Methodological analysis of driver perception—Brake times. Transportation Human Factors, 2(3), 195–216.
   Google Scholar
• Greibe, P. (2008). Determination of braking distance and driver behaviour based on braking trials. TRB 87th Annual Meeting. Compendium of papers. Washington, DC: Transportation Research Board.
   Google Scholar
• Hussein, M., Sayed, T., Ismail, K., & Van Espen, A. (2014). Calibrating road design guides using risk-based reliability analysis. Journal of Transportation Engineering. ASCE, 140(9), 1–6.
   Web of Science ®Google Scholar
• Ismail, K., & Sayed, T. (2012). Risk-optimal highway design: methodology and case studies. Safety Science, 50(7), 1513–1521.
   Web of Science ®Google Scholar
• Ibrahim, S. E., Sayed, T., & Ismail, K. (2012). Methodology for safety optimization of highway cross-sections for horizontal curves with restricted sight distance. Accident Analysis and Prevention, 49, 476–485.
   PubMed Web of Science ®Google Scholar
• Johansson, G., & Rumar, K. (1971). Drivers brake reaction time. Human factors (vol. 13, pp. 23–27). Santa Monica. CA: Human factors Society.
   Google Scholar
• Kosasih, D., Robinson, R., & Snell, J. (1987). A review of some recent geometric road standards and their application to developing countries (Digest of Research Report 114). Crothworne, Berkshire, UK: Transport and Road Research Laboratory, Department of Transport.
   Google Scholar
• Lamm, R., Psarianos, B, & Mailaender, T. (1999). Highway design and traffic safety engineering handbook. New York, NY: McGraw-Hill.
   Google Scholar
• Layton, R. D. (1997). Stopping sight distance and decision sight distance (Discussion paper No. 8.A). Corvallis, OR: Oregon State University, Transportation Research Institute. Retrieved from http://www.oregon.gov/odot/hwy/accessmgt/docs/stopdist.pdf
   Google Scholar
• Layton, R., & Dixon, K. (2012). Stopping sight distance (Discussion paper #1.). Corvallis, OR: Oregon State University, Kiewit Center for Infrastructure and Transportation.
   Google Scholar
• Lemke, K. (2000). Road safety in tunnels. Transportation Research Record, 1940, 170–174.
   Google Scholar
• Lerner, N., Huey, R., McGee, H., & Sullivan, A. (1995). Older driver perception reaction time for intersection sight distance and object detection (FHWA RD-93-168). Washington, DC: US Department of Transportation, Federal Highway Administration.
   Google Scholar
• Navin, F. P. D. (1992). Reliability indices for road geometric design. Canadian Journal of Civil Engineering, 19(5), 760–766.
   Web of Science ®Google Scholar
• Navin, F. P. D. (1990). Safety factors for road design, can they be estimated? Transportation Research Record, 1280, 181–189.
   Google Scholar
• Norwegian Public Road Administration. (2004). Road tunnels manual 021, standard.
   Google Scholar
• Nussbaumer, C. (2007). Comparative analysis of safety in tunnels. Young Researchers Seminar, Brno, Czech Republic. Retrieved from www.ectri.org/YRS07/Papiers/Session-9/Nussbaumer.pdf.
   Google Scholar
• Nussbaumer, C., & Nitsche, P. (2008). Safety of road tunnels. Traffic safety in highway and expressway tunnels. Vienna, Austria: Austrian Road Safety Board.
   Google Scholar
• Olson, P. L., & Sivak, M. (1986). Perception reaction time to unexpected roadway hazards. Human Factors, 28(1), 91–96.
   PubMed Web of Science ®Google Scholar
• PIARC. (2001). Cross-section geometry in unidirectional road tunnels, technical committee on road tunnels operation (Report 05.11B). Paris, France: World Road Association.
   Google Scholar
• PIARC. (2003). Road safety manual. Recommendations from the world road association. PIARC technical committee on road safety (C13) version 1. Retrieved from http://www.piarc.org/en/order-library/6286-en-Road%20Safety%20Manual.htm
   Google Scholar
• PIARC. (2004). Cross section design of bi-directional road tunnels, technical committee on road tunnels operation (Report 05.12 B). Paris, France: World Road Association.
   Google Scholar
• PIARC. (2008). Human factors and road tunnel safety regarding users. PIARC Technical Committee C3.3, Road Tunnel Operation (Report R17, ISBN 2-84060-218-0). Paris, France: World Road Association. Retrieved from http://www.piarc.org/en/order-library/6173-en-Human%20factors%20and%20road%20tunnel%20safety%20regarding%20users.htm
   Google Scholar
• Road and Transportation Research Association, Working Group Traffic Routing and Road Safety. (2006). Regulations for the equipment and operation for road tunnels. Köln, Germany: FGSV-Verlag.
   Google Scholar
• Road and Transportation Research Association. (2011). Guidelines for the design of motorways. FGSV. RAA. Edition 2008. Translation 2011. Cologne, Germany.
   Google Scholar
• Sivak, M., Olson, P. L., & Farmer, K. L. (1982). Radar measured reaction times of unalerted drivers to brake signals. Perceptual and Monitor Skills, 55(2), 594.
   Web of Science ®Google Scholar
• Summala, H. (2000). Brake reaction times and driver behavior analysis. Transportation Human Factors, 2(3), 217–226.
   Google Scholar
• Summala, H. (2002). Behavioural adaptation and drivers task control. In R. Fuller & A. J. Santos (Eds.), Human factors for highway engineers (Ch. 13, pp. 189–200). Oxford, UK: Pergamon, Elsevier Science. Ltd.
   Google Scholar
• Thanesuen, S., Kagaya, S., & Uchika, K. (2005). Traffic management in terms of speed limit in Hokkaido area. Journal of the Eastern Asia Society for Transportation Studies, 6, 2247–2262.
   Google Scholar
• Wortman, R. H., & Matthias, J. S. (1983). Evaluation of driver behavior at signalized intersections. Transportation Research Record, 904, 10–20.
   Google Scholar
• Yeung, J. S., & Wong, Y. D. (2013). Road traffic accidents in Singapore expressways tunnels. Tunneling and Underground Space Technology, 38, 534–541. 2013.
   Web of Science ®Google Scholar