603
Views
11
CrossRef citations to date
0
Altmetric
Original Articles

Determination of key diffusion and partition parameters and their use in migration modelling of benzophenone from low-density polyethylene (LDPE) into different foodstuffs

, , , , , , , , , , , & show all
Pages 715-724 | Received 10 Jan 2016, Accepted 13 Feb 2016, Published online: 16 Mar 2016

References

  • Begley T, Castle L, Feigenbaum A, Franz R, Hinrichs K, Lickly T, Mercea P, Milana M, O’Brien A, Rebre S, et al. 2005. Evaluation of migration models that might be used in support of regulations for food-contact plastics. Food Addit Contam. 22:73–90.
  • Brandsch J, Mercea P, Piringer O. 2000. Migration of plastic constituents. In: Piringer OG, Baner AL, editors. Plastic packaging materials for food: barrier function, mass transport, quality assurance, and legislation. Weinheim: Wiley-VCH; p. 445–468.
  • Brandsch J, Mercea P, Tosa V, Piringer O. 2002. Migration modeling as a tool for quality assurance of food packaging. Food Addit Contam. 19:29–41.
  • Canellas E, Aznar M, Nerín C, Mercea P. 2010. Partition and diffusion of volatile compounds from acrylic adhesives used for food packaging multilayers manufacturing. J Mater Chem. 20:5100–5109.
  • Crank J. 1975. The mathematics of diffusion. 2nd ed. Oxford: Oxford Science Publications; Oxford University Press.
  • Cruz JM, Sanches Silva A, Sendón García R, Franz R, Paseiro Losada P. 2007. Studies of mass transport of model chemicals from packaging into and within cheeses. J Food Eng. 87:107–115.
  • European Commission [EC]. Food Contact Materials – Practical Guide. Section 3, Annex I – Mathematical Modelling, pp 58–93; [updated 2003 April 15, cited 2015 Sep 21]. Available from: http://ec.europa.eu/food/food/chemicalsafety/foodcontact/practical_guide_en.pdf
  • Finnigan B. 2009. Barrier polymers. In: Yam KL, editor. Wiley Encyclopedia of packaging technology. 3rd ed. New Jersey: John Wiley & Sons; p. 103–109.
  • Franz R. 2005. Migration modelling from food-contact plastics into foodstuffs as a new tool for consumer exposure estimation. Food Addit Contam. 22:920–937.
  • Granda-Restrepo DM, Soto-Valdez H, Peralta E, Troncoso-Rojas R, Vallejo-Córdoba B, Gámez-Meza N, Graciano-Verdugo AZ. 2009. Migration of α-tocopherol from an active multilayer film into whole milk powder. Food Res Int. 42:1396–1402.
  • Hamdani M, Feigenbaum A, Vergnaud JM. 1997. Prediction of worst case migration from packaging to food using mathematical models. Food Addit Contam. 14:499–506.
  • Hearty A, Gibney MJ, Vin K, Leclercq C, Castle L, O’Mahony C, Oldring PKT, Volatier JL, McKevitt A, Tennant D, et al. 2011Sep. The FACET project: a chemical exposure surveillance system for Europe [Internet]. Food Sci Tech Mag. 25(3):26–29 [cited 2016 Mar 2]. Available from: http://www.fstjournal.org/unrestricted-magazine/archive/25-03-2011/index.html#/26/.
  • Helmroth IE, Dekker M, Hankemeier T. 2002. Influence of Solvent Absorption on the Migration of Irganox 1076 from LDPE. Food Addit Contam. 19:176–183.
  • Hernandez-Muñoz P, Catalá R, Gavara R. 2001. Food aroma partition between packaging materials and fatty food simulants. Food Addit Contam. 18:673–682.
  • Koszinowski J. 1986. Diffusion and solubility of n-alkanes in polyolefins. J Appl Polym Sci. 31:1805–1826.
  • Lundquist L, Leterrier Y, Sunderland P, Månson JAE. 2000. Life Cycle Engineering of plastics technology, economy and the environment. 1st ed. Oxford: Elsevier Science. Chapter 1, Introduction to Life Cycle Engineering; p. 5–12.
  • O’Brien A, Cooper I, Tice PA. 1997. Correlation of specific migration (Cf) of plastics additives with their initial concentration in the polymer (Cp). Food Addit Contam. 14:705–719.
  • Oldring PKT, Castle L, Franz R. 2009. Exposure to substances from food contact materials and an introduction to the FACET project. Deut Lebensm-Rundsch. 105:501–507.
  • Oldring PKT, O’Mahony C, Dixon J, Vints M, Mehegan J, Dequatre C, Castle L. 2014. Development of a new modelling tool (FACET) to assess exposure to chemical migrants from food packaging. Food Addit Contam A. 31:444–465.
  • Petersen JH, Trier XT, Fabech B. 2005. Mathematical modelling of migration: a suitable tool for the enforcement authorities? Food Addit Contam. 22:938–944.
  • Poças MF, Hogg T. 2007. Exposure assessment of chemicals from packaging materials in foods: a review. Trends Food Sci Tech. 18:219–230.
  • Sanches Silva A, Cruz Freire JM, Paseiro Losada P. 2010. Study of the diffusion coefficients of diphenylbutadiene and triclosan into and within meat. Eur Food Res Technol. 230:957–964.
  • Sanches Silva A, Cruz Freire JM, Sendón García R, Franz R, Paseiro Losada P. 2007. Time-temperature study of the kinetics of migration of dpbd from plastics into chocolate, chocolate spread and margarine. Food Res Int. 40:679–686.
  • Sanches Silva A, Sendón García R, Cooper I, Franz R, Paseiro Losada P. 2006. Compilation of analytical methods and guidelines for the determination of selected model migrants from plastic packaging. Trends Food Sci Tech. 17:535–546.
  • Tehrany EA, Desobry S. 2004. Partition coefficients in food/packaging systems: a Review. Food Addit Contam. 21:1186–1202.
  • Tosa V, Kovacs K, Mercea P, Piringer O A finite difference method for modeling migration of impurities in multilayer. Presented at: AIP Conference Proceedings 1048; 2008 Sep 16–20; Kos (Greece).
  • United States Department of Agriculture [USDA], Agricultural Research Service, National Nutrient Database for Standard Reference, Release 28; [cited 2015 Oct 03]. Available from: http://ndb.nal.usda.gov/ndb/search/list
  • Widén H, Leufvén A, Nielsen T. 2004. Migration of Model Contaminants from PET Bottles: Influence of Temperature, Food Simulant and Functional Barrier. Food Addit Contam. 21:993–1006.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.