Migration kinetics of four photo-initiators from paper food packaging to solid food simulants

References

• Alin J, Hakkarainen M. 2011. Microwave heating causes rapid degradation of antioxidants in polypropylene packaging, leading to greatly increased specific migration to food simulants as shown by ESI-MS and GC-MS. J Agric Food Chem. 59:5418–5427.
   PubMed Web of Science ®Google Scholar
• Allegrone G, Tamaro I, Spinardi S, Grosa G. 2008. Development and validation of a solid-phase extraction and gas chromatography-tandem mass spectrometry method for the determination of isopropyl-9H-thioxanthen-9-one in carton packaged milk. J Chromatogr A. 1214:128–133.
   PubMed Web of Science ®Google Scholar
• Baner A, Brandsch J, Franz R, Pirnger O. 1996. The application of a predictive migration model for evaluating the compliance of plastic materials with European food regulations. Food Addit Contam. 13:587–601.
   PubMed Web of Science ®Google Scholar
• Baner A, Franz R, Pirnger O. 1994. Alternative methods for the determination and evaluation of migration potential from polymeric food contact materials. Deutsche Liebensmitte-Rundschau. 90:137–143.
   Web of Science ®Google Scholar
• Benetti C, Angeletti R, Binato G, Biancardi A, Biancotto G. 2008. A packaging contaminant: isopropylthioxanthone (ITX) in dairy products. Anal Chim Acta. 617:132–138.
   PubMed Web of Science ®Google Scholar
• Bentayeb K, Ackerman LK, Begley TH. 2012. Ambient ionization–accurate mass spectrometry (AMI-AMS) for the identification of nonvisible set-off in food-contact materials. J Agric Food Chem. 60:1914–1920.
   PubMed Web of Science ®Google Scholar
• Binderup M, Pedersen G, Vinggaard A, Rasmussen E, Rosenquist H, Cederberg T. 2002. Toxicity testing and chemical analyses of recycled fibre-based paper for food contact. Food Addit Contam. 19:13–28.
   PubMed Web of Science ®Google Scholar
• Bononi M, Tateo F. 2009. Identification of diisobutyl phthalate (DIBP) suspected as possible contaminant in recycled cellulose for take-away pizza boxes. Packag Technol Sci. 22:59–59.
   Web of Science ®Google Scholar
• Bradley EL, Castle L, Dines TJ, Fitzgerald AG, Tunon PG, Jickells SM, Johns SM, Layfield ES, Mountfort KA, Onoh H. 2005. Test method for measuring non-visible set-off from inks and lacquers on the food-contact surface of printed packaging materials. Food Addit Contam. 22:490–502.
   PubMed Web of Science ®Google Scholar
• Cai H, Shang G, Zhang J, Tao G, Chen G, Wan X. 2015. Determination of 10 photo-initiator residues in food plastic packaging by gel permeation chromatography extraction coupled with gas chromatography-mass spectrometry. Anal Methods. 7:9026–9031.
   Web of Science ®Google Scholar
• Chung D, Papadakis SE, Yam KL. 2002. Simple models for assessing migration from food-packaging films. Food Addit Contam. 19:611–617.
   PubMed Web of Science ®Google Scholar
• Ehlert KA, Beumer CWE, Groot MCE. 2008. Migration of bisphenol A into water from polycarbonate baby bottles during microwave heating. Food Addit Contam. 25:904–910.
   Web of Science ®Google Scholar
• EuPIA Suitability List of Photoinitiators for Low migration UV Printing Inks and Varnishes – February. 2013. Available from: http://www.eupia.org/uploads/tx_edm/130219_corr3_EuPIA_Suitability_List_of_Photoinitiators_for_Low_migration_UV_Printing_Inks_and_Varnishes.pdf
   Google Scholar
• Franz R. 2005. Migration modelling from food-contact plastics into foodstuffs as a new tool for consumer exposure estimation. Food Addit Contam. 22:920–937.
   PubMed Web of Science ®Google Scholar
• Freitas MA, Josenete C. Cost. 2006. Shelf life determination using sensory evaluation scores: a general weibull modeling approach. 51:652–670. doi:10.1016/j.cie.2006.04.005
   Google Scholar
• Gallart-Ayala H, Moyano E, Galceran MT. 2008. Liquid chromatography/tandem mass spectrometry (highly selective selected reaction monitoring) for the analysis of isopropylthioxanthone in packaged food. J Chromatogr A. 1208:182–188.
   PubMed Web of Science ®Google Scholar
• Gianni AD, Bongiovanni R, Priola A, Turri S. 2004. UV-cured fluorinated coatings for plastics: effect of the photoinitiator and of the substrate filler on adhesion. Int J Adhes Adhesives. 24:513–518.
   Web of Science ®Google Scholar
• Gil-Vergara A, Blasco C, Picó Y. 2007. Determination of 2-isopropyl thioxanthone and 2-ethylhexyl-4-dimethylaminobenzoate in milk: comparison of gas and liquid chromatography with mass spectrometry. Anal Bioanal Chem. 389:605–617.
   PubMed Web of Science ®Google Scholar
• Helmroth E, Rijk R, Dekker M, Jongen AW. 2002. Predictive modelling of migration from packaging materials into food products for regulatory purposes. Trends Food Science Tech. 13:102–109.
   Web of Science ®Google Scholar
• Houwea KVD, Evrarda C, Locoa JV, Lynenb F, Hoecka EV. 2016. Migration of photoinitiators from cardboard into dry food: evaluation of Tenax® as a food simulant. Food Addit Contam Part A. 33:913–920.
   Google Scholar
• Jung T, Simat TJ, Altkofer W. 2010. Mass transfer ways of ultraviolet printing ink ingredients into foodstuffs. Food Addit Contam. 27:1040–1049.
   Web of Science ®Google Scholar
• Kim M. 1993. Evaluation for food packaging potential and environmental compatibility of novel degradable starch-polyethylene plastics. Ames (IA): University Microfilms International.
   Google Scholar
• Limm W, Hollifield HC. 1996. Modelling of additive diffusion in polyolefins. Food Addit Contam. 13:949–967.
   PubMedGoogle Scholar
• Morlock G, Schwack W. 2006. Determination of isopropylthioxanthone (ITX) in milk, yoghurt and fat by HPTLC-FLD, HPTLC-ESI/MS and HPTLC-DART/MS. Anal Bioanal Chem. 385:586–595.
   PubMed Web of Science ®Google Scholar
• Parry SJ, Aston DS. 2004. Migration of inorganic contaminants into dry food from packaging made from recycled paper and board. Food Addit Contam. 21:506–511.
   PubMed Web of Science ®Google Scholar
• Peijnenburg A, Riethof-Poortman J, Baykus H, Portier L, Bovee T, Hoogenboom R. 2010. AhR-agonistic, anti-androgenic, and anti-estrogenic potencies of 2-isopropylthioxanthone (ITX) as determined by in vitro bioassays and gene expression profiling. Toxicol In Vitro. 24:1619–1619.
   PubMed Web of Science ®Google Scholar
• Poas MF, Oliveira JC, Brandsch R, Hogg T. 2012. Analysis of mathematical models to describe the migration of additives from packaging plastics to foods. J Food Process Eng. 35:657–676.
   Web of Science ®Google Scholar
• Poas MF, Oliveira JC, Pereira JR, Brandsch R, Hogg T. 2011. Modelling migration from paper into a food simulant. Food Control. 22:303–312.
   Web of Science ®Google Scholar
• Sagratini G, Caprioli G, Cristalli G, Giardiná D, Ricciutelli M, Volpini R, Zuo Y, Vittori S. 2008. Determination of ink photoinitiators in packaged beverages by gas chromatography–mass spectrometry and liquid chromatography–mass spectrometry. J Chromatogr A. 1194:213–220.
   PubMed Web of Science ®Google Scholar
• Sanches-Silva A, Andre C, Castanheira I, Cruz J, Pastorelli S, Simoneau C, Paseiro-Losada P. 2009. Study of the migration of photoinitiators used in printed food-packaging materials into food simulants. J Agric Food Chem. 57:9516–9523.
   PubMed Web of Science ®Google Scholar
• Sanches-Silva A, Pastorelli S, Cruz JM, Simoneau C, Paseiro-Losada ICP. 2008b. Development of a method to study the migration of six photoinitiators into powdered milk. J Agric Food Chem. 56:2722–2726.
   PubMed Web of Science ®Google Scholar
• Sanches-Silva A, Pastorelli S, Cruz JM, Simoneau C, Paseiro-Losada P. 2008a. Development of a multimethod for the determination of photoinitiators in beverage packaging. J Food Sci. 73:C92–C99.
   PubMed Web of Science ®Google Scholar
• Shen D-X, Lian H-Z, Ding T, Xu J-Z, Shen C-Y. 2009. Determination of low-level ink photoinitiator residues in packaged milk by solid-phase extraction and LC-ESI/MS/MS using triple-quadrupole mass analyzer. Anal Bioanal Chem. 395:2359–2370.
   PubMed Web of Science ®Google Scholar
• Song YS, Begley T, Paquette K, Komolprasert V. 2003. Effectiveness of polypropylene film as a barrier to migration from recycled paperboard packaging to fatty and high-moisture food. Food Addit Contam. 20:875–883.
   PubMed Web of Science ®Google Scholar
• Triantafyllou VI, Akrida-Demertzi K, Demertzis P. 2007. A study on the migration of organic pollutants from recycled paperboard packaging materials to solid food matrices. Food Chem. 101:1759–1768.
   Web of Science ®Google Scholar
• Triantafyllou VI, Akrida-Demertzi K, Demertzis PG. 2005. Determination of partition behavior of organic surrogates between paperboard packaging materials and air. J Chromatogr A. 1077:74–79.
   PubMed Web of Science ®Google Scholar
• Van Bossuyt M, Van Hoeck E, Vanhaecke T, Rogiers V, Mertens B. 2016. Printed paper and board food contact materials as a potential source of food contamination. Regul Toxicol Pharmacol. 81:10–19.
   PubMed Web of Science ®Google Scholar
• Van den Houwe K, van de Velde S, Evrard C, Van Hoeck E, Van Loco J, Bolle F. 2014. Evaluation of the migration of 15 photo-initiators from cardboard packaging into Tenax(®) using ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS). Food Additives Contaminants Part A. 31:767–775.
   PubMed Web of Science ®Google Scholar
• Wang XF, Wei XF, Huang PQ. 2011. Effect of photo-initiator on curing rate of water-base UV varnish. Advanced Mater Res. 380:112–116.
   Google Scholar
• Zhu J, Li L, Zhang S, Li X, Zhang B. 2016. Multi-scale structural changes of starch-based material during microwave and conventional heating. Int J Biol Macromol. 92:270–277.
   PubMed Web of Science ®Google Scholar
• Zulch A, Piringer O. 2010. Measurement and modelling of migration from paper and board into foodstuffs and dry food simulants. Food Addit Contam. 27:1306–1324.
   Web of Science ®Google Scholar