References
- Yu, W., Gregory, J., Campos, L., and Li, G., 2011. The role of mixing conditions on floc growth, breakage and re-growthth, J. Chem. Eng. 171 (2011), pp. 425–430.
- Chakraborti, R.K., Gardner, K.H., Atkinson, J.F., and Van Benschoten, J.E., 2003. Changes in fractal dimension during aggregation, Water Res. 37 (2003), pp. 873–883.
- Zhan, X., Gao, B., Wang, Y., and Qinyan, Y., 2011. Influence of velocity gradient on aluminum and iron floc property for NOM removal from low organic matter surface water by coagulation, J. Chem. Eng. 166 (2011), pp. 116–121.
- Oles, V., 1992. Shear-induced aggregation and breakup of polystyrene latex-particles, J. Colloid Interface Sci. 154 (2) (1992), pp. 351–358.
- Serra, T., Colomer, J., and Casamitjana, X., 1997. Aggregation and breakup of particles in a shear flow, J. Colloid Interface Sci. 187 (2) (1997), pp. 466–473.
- Rossini, M., Garrido, J.G., and Galluzo, M., 1999. Optimization of the coagulation-flocculation treatment: Influence of rapid mixing parameters, Water Res. 33 (8) (1999), pp. 1817–1826.
- Vrale, L., and Jorden, R.M., 1971. Rapid mixing time in water treatment, J. Am. Water Works Assn. 63 (1971), pp. 52–58.
- Mhaisalkar, V.A., Paramasivam, R., and Bhloe, A.G., 1991. Optimizing physical parameters of rapid mix design for coagulation—flocculation of turbid water, Water Res. 25 (1991), pp. 43–52.
- Kan, C.C., Huang, J.P., and Pan, J.R.S., 2002. Time requirement for rapid—mixing in coagulation, Colloids Surf., A 203 (2002), pp. 1–9.
- Clomer, J., Petersb, F., and Marrase, C., 2005. Experimental analysis of coagulation of particles under low—shear flow, Water Res. 39 (2005), pp. 2994–3000.
- Yukselen, M., and Gregory, J., 2004. The effect of rapid mixing on the break-up and re-formation of flocs, J. Chem. Technol. Biotechnol. 78 (2004), pp. 782–788.
- Yu, W., Li, G., Xu, Y., and Yang, X., 2009. Breakage and re-growth of flocs by alum and PACl, Powder Technol. 189 (2009), pp. 439–443.
- Zhao, Y.X., Gao, B.Y., Shon, H.K., Kim, J.H., and Yue, Q.Y., 2011. Effect of share force, solution pH and breakage period on characteristics of flocs formed by Titanium tetrachloride (TiCl4) and Polyaluminum chloride (PACl) with surface water treatment, J. Hazard. Mater. 287 (2011), pp. 495–501.
- Martyn, C.N., Barker, D.J.P., and Osmond, C., 1989. Geographical relation between Alzheimer’s disease and aluminum in drinking water, Lancet 1 (1989), pp. 59–62.
- McLachlan, D.R.C., Bergeron, C., and Smith, J.E., 1996. Risk for neuropathlogically confirmed Alzheimer’s disease and residual aluminum in municipal drinking water employing weighted residential histories, Neurology 46 (1996), pp. 401–405.
- Wang, J., Deevanhxay, P., Hasegawa, T., Ehara, Y., Kurokawa, M., Hashimoto, K., Nishijima, W., and Okada, M., 2002. A pilot plant study of polysilicato-iron coagulant, Water. Sci. Technol. 2 (2) (2002), pp. 107–113.
- Hasegawa, T., Hashimoto, K., Onitsuka, T., Goto, K., and Tambo, H., 1991. Characteristics of metal-polysilicate coagulants, Water. Sci. Technol. 23 (1991), pp. 1713–1722.
- K. Hashimoto, T. Hasegawa, X. Wang, N. Tambo, The physicochemical properties of coagulation by polysilicate-aluminum coagulant, in: Proceedings ICEWW, July 12-16, Beijing, 1994, pp. 96–103..
- T. Hasegawa, J. Wang, M. Kurokawa, K. Hasimoto, Removal of algae by polysilicato-iron coagulant, in: Chemistry for Protection of the Environment, Proceedings of the XII CPE International Conference, September, Nanjing, 1999, pp. 252–256..
- Francois, R.J., 1987. Strength of aluminum hydroxide flocs, Water Res. 21 (9) (1987), pp. 1023–1030.
- Zhao, Y.X., Gao, B.Y., Shon, H.K., Kim, J.H., and Yue, Q.Y., 2011. Effect of shear force, solution pH and breakage period on characteristics of flocs formed by Titanium tetrachloride (TiCl4) and Polyaluminum chloride (PACl) with surface water treatment, J. Hazard. Mater. 187 (2011), pp. 495–501.
- Shi, J., Zhang, Y., Zou, K., and Xiao, F., 2011. Speciation characterization and coagulation of poly-silica-ferric-chloride: The role of hydrolyzed Fe(III) and silica interaction, J. Environ. Sci. 23 (5) (2011), pp. 749–756.
- Kan, C.C., Huang, J.P., and Pan, J.R.S., 2002. Coagulation of high turbidity water: The effects of rapid mixing, J. Water Supply Res. Technol. 51 (2002), pp. 77–85.
- Park, S.M., Jun, H.B., Jung, M.S., and Koo, H.M., 2006. Effect of velocity gradient and mixing time on particle growth in a rapid mixing tank, Water Sci. Technol. 53 (7) (2006), pp. 95–102.
- Henderson, R., Sharp, E., Jarvis, P., Parson, S., and Jefferson, B., 2006. Identifying the linkage between particle characteristics and understanding coagulation performance, Water Sci. Technol. 6 (1) (2006), pp. 31–38.
- Yu, W., Gregory, J., and Campos, L., 2010. The effect of additional coagulant on the re-growth of alum—kaolin flocs, Sep. Purif. Technol. 74 (2010), pp. 305–309.