References
- R. McKinnery, Microbiology for Sanitary Engineers, McGraw-Hill, 1962.
- Metcalf and Eddy, Wastewater Engineering Treatment Disposal Reuse, 2nd ed., McGraw Hill, 1999.
- Metcalf and Eddy, Wastewater Engineering Treatment and Reuse, 4th ed., McGraw Hill, 2003.
- L. Benefield, C. Randall, Biological Process Design for Wastewater Treatment. Prentice-Hall, Englewood Cliffs, NJ, 1980.
- S. Strand, E. Carlson, Rapid BOD measurment for municipal wastewater samples using a biofilm electorde. J. Water Pollut. Control Fed. 56 (1984) 464–467.
- G. Fitzmaurice, N. Gray, Evaluation of manufactured inocula for use in the BOD test. Water Res. 23 (1989) 665–657.
- American public health association, American water works association and water environmental federation, Standard Methods for the Examination of Water and Wastewater, 19th ed., Washington, DC, 1998.
- J. Liu, B. Mattiasson, Microbial BOD sensors for wastewater analysis. Water Res. 36 (2002) 3786–3802.
- P. Reuschenbach, U. Pagga, U. Strotmann, A critical comparison of respirometirc biodegradation tests based on OECD 301 and related test methods. Water Res. 37 (2003) 1571–1582.
- K. Roppola, T. Kuokkanen, J. Ramo, H. Prokkola, E. Heiska, Comparison study of different BOD tests in the determination of BOD7 evaluated in a model domestic sewage, J. Aut. Methods Manage. Chem. doi: 10.1155/2007/39761, 2007.
- A. Busch, C. Sawyer, Application of the dropping mercury electrode to BOD determinations, AEC document N. Y. O. 4436, U.S Atomic Energy Comm. Washington, DC, 1952 (cited in D. Ballinger, and R. Lishka (1962).
- D. Ballinger, R. Lishka, Reliability and precision of BOD and COD determinations. J. Water Pollut. Control Fed. 34 (1962) 470–474.
- H. Orford, F. Matusky, Comparison of short-term with 5-day BOD determination of raw sewage. Sewage Ind. Waste 31 (1959) 25.
- M. Lorenzo, T. Curtis, I. Head, K. Scott, A single-chamber application microbial fuel as biosensor for wastewaters. Water Res. 43 (2009) 3145–3154.
- T. Tebbutt, M. Berkun, Respirometic determination of BOD. Water Res. 10 (1976) 613–617.
- P. Dhall, A. Kumar, A. Joshi, T. Saxsena, A. Manoharan, S. Makhijani, R. Kumar, Quick and reliable estimation of BOD load of beverage industrial wastewater by developing BOD biosensor. Sens. Actuators, B 133 (2008) 478–483.
- M. Phadke, Quality Engineering Using Robust Design. Prentice-Hall, Englewood Cliffs, NJ, 1989.
- A. Dubey, V. Yadava, Multi-objective optimization of Nd: YAG laser cutting of nickel-based superalloy sheet using orthognal array with principal component analysis. Optic Lasers Eng. 46 (2008) 124–132.
- A. Al-Refaie, T. Wu, M. Li, DEA approaches for solving the multi-response problem in Taguchi method. Artif. Intell. Eng. Des. Anal. Manuf. 23 (2009) 159–173.
- A. Al-Refaie, Super-efficiency DEA approach for optimizing multiple quality characteristics in parameter design. Int. J. Artif. Life Res. 1 (2010) 58–71.
- S. Sharma, Applied Multivariate Techniques, John Wiley & Sons, Inc., 1996.
- Instruction manual.BA31101e04/11.2004/As/Oxitop, Operation of the Single Measuring System®. Measuring principle.BOD measurement with the OxiTop®.
- L. Abu Ghunmi, G. Zeeman, M. Fayyad, J. van Lier, Grey water biodegradability. Biodegradation 22 (2011) 163–174.