References
- Oliver , W.C. and Pharr , G.M. 2004 . Measurements of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology . J. Mater. Res. , 19 : 3 – 20 .
- Mencik , J. 2007 . Determination of mechanical properties by instrumented indentation . Meccanica , 42 : 19 – 29 .
- Knapp , J.A. , Follstaedt , D.M. , Myers , S.M. , Barbour , J.C. and Friedmann , T.A. 1999 . Finite-element modeling of nanoindentation . J. Appl. Phys. , 85 : 1460 – 1474 .
- Panich , N. , Kraivichien , V. and Yong , S. 2004 . Finite element simulation of nanoindentation of bulk materials . J. Sci. Res. Chula Univ. , 29 : 145 – 153 .
- Pelletier , H. , Krier , J. , Cornet , A. and Mille , P. 2000 . Limits of using bilinear stress–strain curve for finite element modeling of nanoindentation response of bulk materials . Thin Solid Films , 379 : 147 – 155 .
- Li , M. , Chen , W.M. , Liang , N.G. and Wang , L.D. 2004 . A numerical study of indentation using indenters of different geometry . J. Mater. Res. , 19 : 73 – 78 .
- Swaddiwudhipong , S. , Hua , J. , Tho , K.K. and Liu , Z.S. 2006 . Equivalency of Berkovich and conical load–indentation curves . Model. Simulat. Mater. Sci. Eng. , 14 : 71 – 82 .
- Xu , Z. and Li , X. 2008 . Effects of indenter geometry and material properties on the correction factor of Sneddon's relationship for nanoindentation of elastic and elastic–plastic materials . Acta Mater. , 56 : 1399 – 1405 .
- Sakhorova , N.A. , Fernandes , J.V. , Antunes , J.M. and Oliveira , M.C. 2009 . Comparison between Berkovich, Vickers and conical indentation tests: A three-dimensional numerical simulation study . Int. J. Solid Struct. , 46 : 1095 – 1104 .
- Wang , F. and Keer , L.M. 2005 . Numerical simulation for three-dimensional elastic–plastic contact with hardening behavior . J. Tribol. , 127 : 494 – 502 .
- ABAQUS Analysis User's Manual. Version 6.9 , Dassault Systèmes, Simulia
- Poon , B. 2009 . A critical appraisal of nanoindentation with application to elastic–plastic solids and soft materials . Ph.D. diss., California Institute of Technology ,
- Warren , A.W. and Guo , Y.B. 2006 . Machined surface properties determined by nanoindentation: Experimental and FAE studies on the effects of surface integrity and tip geometry . Surf. Coating Tech. , 201 : 423 – 433 .