Hardened density of freshly compressed concrete and its effect on mechanical properties

References

• AASHTO. (2006). LRFD bridge design specifications (3rd ed.). Washington, DC: Author.
   Google Scholar
• ACI 318. (2005). Building code requirements for structural concrete and commentary. Farmington Hills, MI: American Concrete Institute Committee 318.
   Google Scholar
• ACI Commitee 211.1-91. (2000). Standard practice for selecting proportions for normal, heavyweight, and mass concrete. ACI manual of concrete practice part 1. Farmington Hills, MI: American Concrete Institute. 38 p.
   Google Scholar
• ACI Committee 363. (1984). State-of-the-art report on high-strength concrete. ACI Journal Proceedings, 81, 364–411.
   Web of Science ®Google Scholar
• Ahmad, S. H., & Shah, S. P. (1985). Behavior of hoop confined concrete under high strain rates. ACI Structural Journal, 82, 634–647.
   Google Scholar
• AIJ. (1985). Standard for structural calculation of reinforced concrete structures. Tokyo: Author.
   Google Scholar
• ASTM C192/C192M. (2002). Standard practice for making and curing concrete test specimens in the laboratory. West Conshohocken, PA: Annual Book of ASTM Standard 04.
   Google Scholar
• ASTM C39/C39M. (2002). Standard test method for compressive strength of cylindrical concrete specimens. West Conshohocken, PA: Annual Book of ASTM Standard 04.
   Google Scholar
• ASTM C469. (2002). Standard test method for static modulus of elasticity and Poisson’s ratio of concrete in compression. West Conshohocken, PA: Annual Book of ASTM Standard 04.
   Google Scholar
• CEB-FIP. (1990). Model code for concrete structures, first draft, bulletin d’ information No.195. Paris: Author. 437 p.
   Google Scholar
• Cook, J. E. (1989). 10,000 PSI concrete. Concrete International: Design and Construction, 11, 67–75.
   Google Scholar
• Duan, P., Shui, Z., Chen, W., & Shen, C. (2013). Efficiency of mineral admixtures in concrete: Microstructure, compressive strength and stability of hydrate phases. Applied Clay Science, 83–84, 115–121.10.1016/j.clay.2013.08.021
   Web of Science ®Google Scholar
• Elwan, M. M., El-Alfi, E. A., & El-Didamony, H. (2006). Effect of grain size distribution, moulding pressure and aggressive attack on the activated slag bricks. Proceeding of First Scientific Environmental Conference, Zagazig University. 195–208.
   Google Scholar
• EN 1992-1-1. (2004). Eurocode 2: Design of concrete structures – Part 1–1: General rules and rules for buildings. Approved by CEN. 225 p.
   Google Scholar
• Hale, W. M., Freyne, S. F., Bush, T. D., & Russell, B. W. (2008). Properties of concrete mixtures containing slag cement and fly ash for use in transportation structures. Construction and Building Materials, 22, 1990–2000.10.1016/j.conbuildmat.2007.07.004
   Web of Science ®Google Scholar
• Jobse, H. J., & Moustafa, S. E. (1984). Applications of high strength concrete for highway bridges. PCI Journal, 29, 44–73.10.15554/pcij
   Google Scholar
• Łaźniewska-Piekarczyk, B. (2013). The influence of chemical admixtures on cement hydration and mixture properties of very high performance self-compacting concrete. Construction and Building Materials, 49, 643–662.10.1016/j.conbuildmat.2013.07.072
   Web of Science ®Google Scholar
• Liu, Y. (2007). Strength, modulus of elasticity, shrinkage and creep of concrete (Dissertation for the degree of doctor of philosophy). University of Florida, Florida. 218 p.
   Google Scholar
• Megat Johari, M. A., Brooks, J. J., Kabir, S., & Rivard, P. (2011). Influence of supplementary cementitious materials on engineering properties of high strength concrete. Construction and Building Materials, 25, 2639–2648.10.1016/j.conbuildmat.2010.12.013
   Web of Science ®Google Scholar
• Nematzadeh, M., & Naghipour, M. (2012a). Compressive strength and modulus of elasticity of freshly compressed concrete. Construction and Building Materials, 34, 476–485.10.1016/j.conbuildmat.2012.02.055
   Web of Science ®Google Scholar
• Nematzadeh, M., & Naghipour, M. (2012b). Compressing fresh concrete technique and the effect of excess water content on physical-mechanical properties of compressed concrete. Materials and Design, 37, 256–267.10.1016/j.matdes.2011.12.051
   Web of Science ®Google Scholar
• Noguchi, T., Tomosawa, F., Nemati, K. M., Chiaia, B. M., & Fantilli, A. P. (2009). A practical equation for elastic modulus of concrete. ACI Structural Journal, 106, 690–696.
   Web of Science ®Google Scholar
• Papayianni, I., Tsohos, G., Oikonomou, N., & Mavria, P. (2005). Influence of superplasticizer type and mix design parameters on the performance of them in concrete mixtures. Cement & Concrete Composites, 27, 217–222.
   Web of Science ®Google Scholar
• Pauw, A. (1960). Static modulus of elasticity of concrete as affected by density. ACI Journal, 57, 679–687.
   Google Scholar
• Rahman, A. H. B. A. (2010). Determine optimum mix ratio of compressed concrete using palm oil fuel ash (POFA). Johor Bahru: University Technology Malaysia. 64 p.
   Google Scholar
• Ramamurthy, K., & Narayanan, N. (2000). Factors influencing the density and compressive strength of aerated concrete. Magazine of Concrete Research, 52, 163–168.10.1680/macr.2000.52.3.163
   Web of Science ®Google Scholar
• Rao, M. C., Bhattacharyya, S. K., & Barai, S. V. (2011). Influence of field recycled coarse aggregate on properties of concrete. Materials and Structures, 44, 205–220.
   Web of Science ®Google Scholar
• Rao, M. V. K., Kumar, P. R., & Bhaskar, N. V. R. C. B. (2008). Effect of re-vibration on compressive strength of concrete. Asian Journal of Civil Engineering (Building and Housing), 9, 291–301.
   Google Scholar
• Sahin, R., Demirboga, R., Uysal, H., & Gul, R. (2003). The effects of different cement dosages, slumps and pumice aggregate ratios on the compressive strength and densities of concrete. Cement and Concrete Research, 33, 1245–1249.10.1016/S0008-8846(03)00048-6
   Web of Science ®Google Scholar
• Soutsos, M., Tang, K., & Millard, S. (2011). Use of recycled demolition aggregate in precast products, phase II: Concrete paving blocks. Construction and Building Materials, 25, 3131–3143.10.1016/j.conbuildmat.2010.12.024
   Web of Science ®Google Scholar
• Tasdemir, M. A., Tasdemir, C., Akyüz, S., Jefferson, A. D., Lydon, F. D., & Barr, B. I. G. (1998). Evaluation of strains at peak stresses in concrete: A three-phase composite model approach. Cement and Concrete Composites, 20, 301–318.10.1016/S0958-9465(98)00012-2
   Web of Science ®Google Scholar
• Uysal, M., Yilmaz, K., & Ipek, M. (2012). The effect of mineral admixtures on mechanical properties, chloride ion permeability and impermeability of self-compacting concrete. Construction and Building Materials, 27, 263–270.10.1016/j.conbuildmat.2011.07.049
   Web of Science ®Google Scholar
• Wongpa, J., Kiattikomol, K., Jaturapitakkul, C., & Chindaprasirt, P. (2010). Compressive strength, modulus of elasticity, and water permeability of inorganic polymer concrete. Materials and Design, 31, 4748–4754.10.1016/j.matdes.2010.05.012
   Web of Science ®Google Scholar
• Yildirim, H., & Sengul, O. (2011). Modulus of elasticity of substandard and normal concretes. Construction and Building Materials, 25, 1645–1652.10.1016/j.conbuildmat.2010.10.009
   Web of Science ®Google Scholar