Masonry infills and RC frames interaction: literature overview and state of the art of macromodeling approach

References

• Amato, G., Cavaleri, L., Fossetti, M., & Papia, M. (2008). Infilled frames: Influence of vertical loads on the equivalent diagonal strut model. XIV WCEE. Beijing.
   Google Scholar
• Amato G., Fossetti M., Cavaleri L., & Papia M. (2009). An updated model of equivalent diagonal strut for infill panels. Workshop: Quali Prospettive per l’Eurocodice 8 alla luce delle esperienze italiane [Perspectives on Eurocode 8 basing on Italian experieces], Napoli.
   Google Scholar
• Asteris, P. G. (2003). Lateral stiffness of brick masonry infilled plane frames. Journal of Structural Engineering, 129, 1071–1079.10.1061/(ASCE)0733-9445(2003)129:8(1071)
   Web of Science ®Google Scholar
• Bertero, V. V., & Brokken, S. (1983). Infills in seismic resistant building. Journal of Structural Engineering (ASCE), 109, 1337–1361.10.1061/(ASCE)0733-9445(1983)109:6(1337)
   Web of Science ®Google Scholar
• Bertoldi, S. H., Decanini, L. D., & Gavarini, C. (1993). Telai tamponati soggetti ad azioni sismiche, un modello semplificato: Confronto sperimentale e numerico [Infilled frames subjected to seismic actions, a simplified model: Experimental and numerical comparison]. Atti del 6 Convegno Nazionale ANIDIS [Proceedings of the 6th national conference on seismic engineering ANIDIS] (pp. 815–824). Perugia.
   Google Scholar
• Cavaleri, L., & Papia, M. (2003). A new dynamic identification technique: Application to the evaluation of the equivalent strut for infilled frames. Engineering Structures, 25, 889–901.10.1016/S0141-0296(03)00023-3
   Web of Science ®Google Scholar
• Cavaleri, L., & Di Trapani, F. (2014a). Cyclic response of masonry infilled RC frames: Experimental results and simplified modeling. Soil Dynamics and Earthquake Engineering, 65, 224–242.10.1016/j.soildyn.2014.06.016
   Web of Science ®Google Scholar
• Cavaleri, L., & Di Trapani, F. (2014b). Prediction of the additional shear action on frame members due to infills. Bullettin of Earthquake Engineering. doi:10.1007/s10518-014-9668-z
   Web of Science ®Google Scholar
• Cavaleri, L., Di Trapani, F., Macaluso, G., & Colajanni, P. (2014). Definition of diagonal Poisson’s ratio and elastic modulus for infill masonry walls. Materials and Structures, 47, 39–262.
   Web of Science ®Google Scholar
• Cavaleri L., Di Trapani F., & Papia M. (2013). Analysis of local shear effects in brick masonry infilled RC frames. ECCOMAS Thematic Conference – COMPDYN 2013: 4th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering (pp. 2962–2977). Kos Island.
   Google Scholar
• Cavaleri, L., Fossetti, M., & Papia, M. (2005). Infilled frames: Developments in the evaluation of cyclic behaviour under lateral loads. Structural Engineering and Mechanics, 21, 469–494.10.12989/sem.2005.21.4.469
   Web of Science ®Google Scholar
• Celarec, D., Ricci, P., & Dolšek, M. (2012). The sensitivity of seismic response parameters to the uncertain modelling variables of masonry-infilled reinforced concrete frames. Engineering Structures, 35, 165–177.10.1016/j.engstruct.2011.11.007
   Web of Science ®Google Scholar
• Chrysostomou, C. Z., Gergely, P., & Abel, J. F. (2002). A six-strut model for nonlinear dynamic analysis of steel infilled frames. International Journal of Structural Stability and Dynamics, 2, 335–353.10.1142/S0219455402000567
   Google Scholar
• Crisafulli F. J. (1997). Seismic behaviour of reinforced concrete structures with masonry infills (PhD Thesis). University of Canterbury, Christchurch.
   Google Scholar
• Crisafulli, F. J., & Carr, A. J. (2007). Proposed macro-model for the analysis of infilled frame structures. Bulletin of the New Zealand Society of Earthquake Engineering, 40, 69–77.
   Google Scholar
• DM (Ministerial Decree). (2008, January 14). Nuove norme tecniche per le costruzioni [New technical codes for constructions]. Rome: Ministry of Infrastructures and Transportations.
   Google Scholar
• Dawe J. L., & Seah C. K. (1989). Analysis of concrete masonry infilled steel frames subjected to in-plane loads. Proceedings of the 5th Canadian Masonry Symposium (pp. 329–340). Vancouver, BC.
   Google Scholar
• Decanini, L. D., Liberatore, L., & Mollaioli, F. (2014). Strength and stiffness reduction factors for infilled frames with openings. Earthquake Engineering and Engineering Vibration, 13, 437–454.10.1007/s11803-014-0254-9
   Web of Science ®Google Scholar
• Dolšek, M., & Fajfar, P. (2008). The effect of masonry infills on the seismic response of a four-storey reinforced concrete frame – A deterministic assessment. Engineering Structures, 30, 1991–2001.10.1016/j.engstruct.2008.01.001
   Web of Science ®Google Scholar
• Doudoumis, I. N. (2007). Finite element modelling and investigation of the behaviour of elastic infilled frames under monotonic loading. Engineering Structures, 29, 1004–1024.10.1016/j.engstruct.2006.07.011
   Web of Science ®Google Scholar
• Doudoumis, I. N., & Mitsopoulou E. N. (1986). Non-linear analysis of multi-storey infilled frames for unilateral contact condition. Proceedings of 8th European Conference on Earthquake Engineering (Vol. 3, pp. 63–70). Lisbon.
   Google Scholar
• Dowell, R. K., Seible, F., & Wilson, E. L. (1998). Pivot hysteresis model for reinforced concrete members. Structural Journal (ACI), 95, 607–617.
   Web of Science ®Google Scholar
• Durrani A. J., & Luo Y. H. (1994). Seismic retrofit of flat-slab buildings with masonry infill. Proceedings of the NCEER Workshop on Seismic Response of Masonry Infills. Report NCEER-94-0004.
   Google Scholar
• El-Dakhakhni, W., Elgaaly, M., & Hamid, A. (2003). Three-strut model for concrete masonry-infilled steel frames. Journal of Structural Engineering (ASCE), 192, 177–185.10.1061/(ASCE)0733-9445(2003)129:2(177)
   Web of Science ®Google Scholar
• Eurocode 8. (2004). Design of structures for earthquake resistance – Part 1: General rules, seismic actions and rules for buildings. Brussels: CEN.
   Google Scholar
• FEMA 356. (2000). Prestandard and commentary for the seismic rehabilitation of buildings. Washington, DC: Federal Emergency Management.
   Google Scholar
• Fiore, A., Netti, A., & Monaco, P. (2012). The influence of masonry infill on the seismic behaviour of RC frame buildings. Engineering Structures, 44, 133–145.10.1016/j.engstruct.2012.05.023
   Web of Science ®Google Scholar
• Fiore, A., Porco, F., Raffaele, D., & Uva, G. (2012). About the influence of the infill panels over the collapse mechanisms actived under pushover analyses: Two case studies. Soil Dynamics and Earthquake Engineering, 39, 11–22.10.1016/j.soildyn.2012.02.004
   Web of Science ®Google Scholar
• Giambanco, G., Fileccia Scimemi, G., & Spada, A. (2012). The interphase element. Computational Mechanics, 50, 353–366.10.1007/s00466-011-0664-8
   Web of Science ®Google Scholar
• Holmes M. (1961). Steel frames with brickwork and concrete infilling. Proceedings of Institution of Civil Engineers. Paper No. 6501, 473–478. eISSN .10.1680/iicep.1961.11305
   Google Scholar
• Jones, R. M. (1998). Mechanics of composite materials (2nd ed.). Ann Arbor, MI: Taylor and Francis.
   Google Scholar
• Kakaletsis, D. J., & Karayannis, C. G. (2009). Experimental investigation of infilled reinforced concrete frames with openings. ACI Structural Journal, 102, 132–141.
   Google Scholar
• Klingner, R. E., & Bertero, V. V. (1978). Earthquake resistance of infilled frames. Journal of Structural Engineering (ASCE), 104, 973–989.
   Web of Science ®Google Scholar
• Koutromanos, I., Stavridis, A., Shing, P. B., & Willam, K. (2011). Numerical modeling of masonry-infilled RC frames subjected to seismic loads. Computers and Structures, 89, 1026–1037.10.1016/j.compstruc.2011.01.006
   Web of Science ®Google Scholar
• Lofti, H. R., & Shing, P. B. (1991). An appraisal on smeared crack models for masonry shear wall analysis. Computers and Structures, 41, 413–425.
   Web of Science ®Google Scholar
• Lofti, H. R., & Shing, P. B. (1994). Interface model applied to fracture of masonry structures. Journal of Structural Engineering (ASCE), 120, 63–80.
   Web of Science ®Google Scholar
• Madan, A., Reinhorn, A. M., Mander, J. B., & Valles, R. E. (1997). Modeling of masonry infill panels for structural analysis. Journal of Structural Engineering(ASCE), 123, 1295–1302.10.1061/(ASCE)0733-9445(1997)123:10(1295)
   Web of Science ®Google Scholar
• Mainstone, R. J. (1971). On the stiffness and strength of infilled frames. Proceedings of Institute of Civil Engineers, London, 7360S, 57–89.
   Google Scholar
• Mainstone, R. J. (1974). Supplementary note on the stiffness and strength of infilled frames Current Paper CP 13/74. UK: Building Research Station.
   Google Scholar
• Mallick, D. V., & Severn, R. T. (1967). The behaviour of infilled frames under static loading. Proceedings of Institute of Civil Engineers, 38, 639–656.10.1680/iicep.1967.8192
   Web of Science ®Google Scholar
• Mander, J. B., & Nair, B. (1994). Seismic resistance of brick infilled steel frames with and without retrofit. The Masonry Journal, 12, 24–37.
   Google Scholar
• Mander, J. B., Nair, B., Wojtkowski, K., & Ma, J. (1993). Experimental study on the seismic performance of brick infilled steel frames with and without retrofit (Tech Rep No. 93-0001). NCEER: Buffalo, NY.
   Google Scholar
• Mehrabi, A. B., Shing, P. B., Schuler, M. P., & Noland, J. L. (1996). Experimental evaluation of masonry-infilled RC frames. Journal of Structural Engineering (ASCE), 122, 228–237.10.1061/(ASCE)0733-9445(1996)122:3(228)
   Web of Science ®Google Scholar
• Mehrabi, A. B., & Shing, P. B. (1997). Finite element modelling of masonry-infilled RC frames. Journal of Structural Engineering, 123, 604–613.10.1061/(ASCE)0733-9445(1997)123:5(604)
   Web of Science ®Google Scholar
• Mondal, G., & Jain, S. K. (2008). Lateral stiffness of masonry infilled reinforced concrete (RC) frames with central opening. Earthquake Spectra, 24, 701–723.10.1193/1.2942376
   Web of Science ®Google Scholar
• Panagiotakos, T. B., & Fardis, M. N. (1996). Seismic response of infilled RC frames structures. XXI WCEE. Acapulco.
   Google Scholar
• Papia, M. (1988). Analysis of infilled frames using a coupled finite element and boundary element solution scheme. International Journal for Numerical Methods in Engineering, 26, 731–742.10.1002/(ISSN)1097-0207
   Web of Science ®Google Scholar
• Papia, M., Cavaleri, L., & Fossetti, M. (2003). Infilled frames: Developments in the evaluation of the stiffening effect of infills. Structural Engineering and Mechanics, 16, 675–693.10.12989/sem.2003.16.6.675
   Web of Science ®Google Scholar
• Saneinejad, A., & Hobbs, B. (1995). Inelastic design of infilled frames. Journal of Structural Engineering, 121, 634–650.10.1061/(ASCE)0733-9445(1995)121:4(634)
   Web of Science ®Google Scholar
• Shing, P. B., & Mehrabi, A. B. (2002). Behaviour and analysis of masonry-infilled frames. Progress in Structural Engineering and Materials, 4, 320–331.10.1002/(ISSN)1528-2716
   Google Scholar
• Shing, P. B., & Stavridis, A. (2014). Analysis of seismic response of masonry-infilled RC frames through collapse. ACI Structural Journal, Special Publication, 297, 7.
   Google Scholar
• Spada, A., Giambanco, G., & Rizzo, P. (2009). Damage and plasticity at the interfaces in composite materials and structures. Computer Methods in Applied Mechanics and Engineering, 198, 3884–3901.10.1016/j.cma.2009.08.024
   Web of Science ®Google Scholar
• Stafford Smith, B. (1966). Behaviour of the square infilled frames. Structural Division (ASCE), 92, 381–403.
   Google Scholar
• Stafford Smith, B., & Carter, C. (1969). A method of analysis for infilled frames. ICE Proceedings, Paper No. 7218. 31–48.10.1680/iicep.1969.7290
   Google Scholar
• Tasnimi, A. A., & Mohebkhahb, A. (2011). Investigation on the behavior of brick-infilled steel frames with openings, experimental and analytical approaches. Engineering Structures, 33, 968–980.10.1016/j.engstruct.2010.12.018
   Web of Science ®Google Scholar
• Uva, G., Porco, F., & Fiore, A. (2012). Appraisal of masonry infill walls effect in the seismic response of RC framed buildings: A case study. Engineering Structures, 34, 514–526.10.1016/j.engstruct.2011.08.043
   Web of Science ®Google Scholar
• Valiasis, T. N., Stylianidis, K. C., & Penelis, G. G. (1993). Hysteresis models for weak brick masonry infills in R/C frames under lateral reversals. European Earthquake Engineering, 1, 1–9.
   Google Scholar
• Žarnić R., & Gostič S. (1997). Masonry infilled frames as an effective structural subassemblage. In P. Fajfar & H. Krawinkler (Eds.), Seismic design methodologies for the next generation of codes (pp. 335–346). Rotterdam: Balkema.
   Google Scholar