References
- Abd-Elhady, A. (2013). Mixed mode I/II stress intensity factors through the thickness of disc type specimens. Engineering Solid Mechanics, 1, 119–128.10.5267/j.esm.2013.10.001
- Akbardoost, J., Ayatollahi, M. R., Aliha, M. R. M., Pavier, M. J., & Smith, D. J. (2014). Size-dependent fracture behaviour of Guiting limestone under mixed mode loading. International Journal of Rock Mechanics and Mining Sciences, 71, 369–380.10.1016/j.ijrmms.2014.07.019
- Akulich, A. V., & Zvyagin, A. V. (2008). Interaction between hydraulic and natural fractures. Fluid Dynamics, 43, 428–435.10.1134/S0015462808030101
- Aliha, M. R. M., & Ayatollahi, M. R. (2009). Brittle fracture evaluation of a fine grain cement mortar in combined tensile–shear deformation. Fatigue & Fracture of Engineering Materials & Structures, 32, 987–994.
- Aliha, M. R. M., Ayatollahi, M. R., & Akbardoost, J. (2012). Typical upper bound–lower bound mixed mode fracture resistance envelopes for rock material. Rock Mechanics and Rock Engineering, 45, 65–74.10.1007/s00603-011-0167-0
- Aliha, M. R. M., Ayatollahi, M. R., & Kharazi, B. (2009). Mode II brittle fracture assessment using ASFPB specimen. International Journal of Fracture, 159, 241–246.10.1007/s10704-009-9402-z
- Aliha, M. R. M., Ayatollahi, M. R., & Pakzad, R. (2008). Brittle fracture analysis using a ring-shape specimen containing two angled cracks. International Journal of Fracture, 153, 63–68.10.1007/s10704-008-9280-9
- Aliha, M. R. M., Ayatollahi, M. R., Smith, D. J., & Pavier, M. J. (2010). Geometry and size effects on fracture trajectory in a limestone rock under mixed mode loading. Engineering Fracture Mechanics, 77, 2200–2212.10.1016/j.engfracmech.2010.03.009
- Aliha, M. R. M., Bahmani, A., & Akhondi, S. (2015). Numerical analysis of a new mixed mode I/III fracture test specimen. Engineering Fracture Mechanics, 134, 95–110.10.1016/j.engfracmech.2014.12.010
- Aliha, M. R. M., Hosseinpour, G. R., & Ayatollahi, M. R. (2013). Application of cracked triangular specimen subjected to three-point bending for investigating fracture behaviour of rock materials. Rock Mechanics and Rock Engineering, 46, 1023–1034.10.1007/s00603-012-0325-z
- Ayatollahi, M. R., & Aliha, M. R. M. (2007). Fracture toughness study for a brittle rock subjected to mixed mode I/II loading. International Journal of Rock Mechanics and Mining Sciences, 44, 617–624.10.1016/j.ijrmms.2006.10.001
- Ayatollahi, M. R., & Aliha, M. R. M. (2008). On the use of Brazilian disc specimen for calculating mixed mode I–II fracture toughness of rock materials. Engineering Fracture Mechanics, 75, 4631–4641.10.1016/j.engfracmech.2008.06.018
- Ayatollahi, M. R., Aliha, M. R. M., & Pourkavian, M. H. (2010). Numerical analysis of hydraulic fracturing process in wellbores; A three dimensional mixed mode study. In The First International Applied Geological Congress (IAGC-2010). Mashhad, Iran.
- Azeemuddin, M., Ghori, S. G., Saner, S., & Khan, M. N. (2002, February 20–21). Injection-induced hydraulic fracturing in a naturally fractured carbonate reservoir: A case study from Saudi Arabia. SPE 73784, presented at the SPE International Symposium & Exhibition on Formation Damage Control, Lafayette, LA.
- Bandis, S., Barton, N., & Christianson, M. (1985, September). Application of a new numerical model of joint behaviour to rock mechanics problems. In Proceedings of the International Conference on Rock Joints (pp. 345–356). Lulea.
- Bandis, S., Lumsden, A. C., & Barton, N. (1983). Fundamentals of rock joint deformation. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 20, 249–268.10.1016/0148-9062(83)90595-8
- Behnia, M., Goshtasbi, K., Fatehi Marji, M., & Golshani, A. (2012). On the crack propagation modeling of hydraulic fracturing by a hybridized displacement discontinuity/boundary collocation method. Journal of Mining and Environment, 2(1), 1–16.
- Behnia, M., Goshtasbi, K., Zhang, G., & Mirzeinaly Yazdi, S. H. (2015). Numerical modeling of hydraulic fracture propagation and reorientation. European Journal of Environmental and Civil Engineering, 19, 152–167.10.1080/19648189.2014.939306
- Beugelsdijk, L. J. L., De Pater, C. J., & Sato, K. (2000, April 25–26). Experimental hydraulic fracture propagation in multi-fractured medium. SPE 59419, presented at the SPE Asia Pacific Conference on integrated Modeling, Yokohama.
- Blanton, T. L. (1982, May 16–18). An experimental study of interaction between hydraulically induced and pre-existing fractures. SPE 10847, presented at the SPE/DOE Unconventional Gas Recovery Symposium, Pittsburgh, PA.
- Blanton, T. L. (1986, May 18–21). Propagation of hydraulically and dynamically induced fractures in naturally fractured reservoirs. SPE 15261, presented at the SPE/DOE Unconventional Gas Technology Symposium, Louisville, KY.
- Britt, L. K., & Hager, C. J. (1994, October 10–13). Hydraulic fracturing in a naturally fractured reservoir. SPE 28717, presented at the SPE International Petroleum Conference and Exhibition, Mexico.
- Chang, S. H., Lee, C. I., & Jeon, S. (2002). Measurement of rock fracture toughness under modes I and II and mixed-mode conditions by using disc-type specimens. Engineering Geology, 66, 79–97.10.1016/S0013-7952(02)00033-9
- Chuprakov, D., Melchaeva, O., & Prioul, R. (2013, May 20–22). Hydraulic fracture propagation across a weak discontinuity controlled by fluid injection. In ISRM International Conference for Effective and Sustainable Hydraulic Fracturing. Brisbane: International Society for Rock Mechanics.10.5772/45724
- Chuprakov, D. A., Akulich, A. V., Siebrits, E., & Thiercelin, M. (2011). Hydraulic-fracture propagation in a naturally fractured reservoir. SPE Production & Operations, 26, 88–97. SPE 128715-PA.
- Dahi-Taleghani, A., & Olson, J. E. (2011, September). Namerical modeling of multi-stranded hydraulic fracture propagation: Accounting for the interaction between induced and natural fractures. SPE Journal, 16, 575–581. SPE 124884.
- Dahi-Taleghani, A., & Olson, J. E. (2014, February). How natural fractures could affect hydraulic-fracture geometry. SPE Journal, 19, 161–171. SPE 167608.
- Daneshy, A. A. (1974, May 29–30). Hydraulic fracture propagation in the presence of planes of weakness. SPE 4852, presented at the SPE-European Spring Meeting, Amsterdam.
- De Pater, C. J., Cleary, M. P., Quinn, T. S., Barr, D. T., Johnson, D. E., & Weijers, L. (1994, November). Experimental verification of dimensional analysis for hydraulic fracturing. Society of Petroleum Engineers Production and Facilities, 9, 230–236.
- Dehghan, A. N., Goshtasbi, K., Ahangari, K., & Jin, Y. (2014). Experimental investigation of hydraulic fracture propagation in fractured blocks. Bulletin of Engineering Geology and the Environment. doi:10.1007/s10064-014-0665-x
- Dehghan, A. N., Goshtasbi, K., Ahangari, K., & Jin, Y. (2015). The effect of natural fracture dip and strike on hydraulic fracture propagation. International Journal of Rock Mechanics and Mining Sciences, 75, 210–215.
- Economides, M. J. (1995). A practical companion to reservoir stimulation. New York, NY: Elsevier.
- Fjær, E., Holt, R. M., Horsrud, P., Raaen, A. M., & Risneset, R. (2008). Petroleum related of rock mechanics (2nd ed., pp. 369–390). London: Elsevier.
- Funatsu, T., Kuruppu, M., & Matsui, K. (2014). Effects of temperature and confining pressure on mixed-mode (I–II) and mode II fracture toughness of Kimachi sandstone. International Journal of Rock Mechanics and Mining Sciences, 67, 1–8.10.1016/j.ijrmms.2013.12.009
- Gu, H., Weng, X., Lund, J., Mack, M., Ganguly, U., & Suarez-Rivera, R. (2012). Hydraulic fracture crossing natural fracture at non-orthogonal angles: A criterion and its validation. SPE Production & Operation, 27, 20–26.
- Gupta, P., & Duarte, C. A. (2014). Simulation of non-planar three-dimensional hydraulic fracture propagation. International Journal for Numerical and Analytical Methods in Geomechanics, 38, 1397–1430.10.1002/nag.2305
- Haimson, B. (1967, January 25–26). Initiation and extension of hydraulic fractures in rocks. SPE 1710, presented at the SPE Third Conference on Rock Mechanics, Austin, TX.
- Hickman, S. H., & Zoback, M. D. (1983). The interpretation of hydraulic fracturing pressure-time data for in situ stress determination. In Hydraulic Fracturing Measurements (pp. 44–54). Washington, DC: National Academy Press.
- Hossain, M. M., Rahman, M. K., & Rahman, S. S. (1967, April 20–22). A comprehensive monograph for hydraulic fracture initiation from deviated wellbores under arbitrary stress regimes. SPE 54360, presented at the SPE Asia Pacific Oil & Gas Conference, Jakarta.
- Hossain, M. M., Rahman, M. K., & Rahman, S. S. (2000). Hydraulic fracture initiation and propagation: Roles of wellbore trajectory, perforation and stress regimes. Journal of Petroleum Science and Engineering, 27, 129–149.10.1016/S0920-4105(00)00056-5
- Hurt, R. S., Germanovich, L., & Wu, R. (2006, December). Mixed-mode mechanism of hydraulic fracture segmentation. AGU Fall Meeting Abstracts, 1, 1435.
- Hubbert, M. K., & Willis, D. G. (1957). Mechanics of hydraulic fracturing. Journal of American Association of Petroleum Geologists, 12, 239–257.
- Imamura, T. (1996, January). Prediction of fracture distribution in the Minami Nagaoka gas field: Development patterns of fractures implied by stress distribution and mechanical properties of rocks. Journal of the Japanese Association for Petroleum Technology, 61, 51–60 (in Japanese).
- Jaeger, J. C., Cook, N. G. W., & Zimmerman, R. W. (2007). Fundamentals of rock mechanics. Oxford: Blackwell.
- Jeffrey, R. G., Zhang, X., & Thiercelin, M. (2009, January 19–21). Hydraulic fracture off-setting in naturally fractures reservoirs: Quantifying a long-recognized process. Presented at the SPE Hydraulic Fracturing Technology Conference, The Woodlands, TX. SPE-119351-MS.
- Keshavarzi, R., & Mohammadi, S. (2012, March 20–22). A new approach for numerical modeling of hydraulic fracture propagation in naturally fractured reservoirs. In Proceedings of the SPE/EAGE European Unconventional Recourses Conference and Exhibition, SPE 152509, Vienna.
- Lamont, N., & Jessen, F. (1963, February). The effects of existing fractures in rocks on the extension of hydraulic fractures. Journal of Petroleum Technology, 15, 203–209.10.2118/419-PA
- Lim, I. L., Johnston, I. W., Choi, S. K., & Boland, J. N. (1994, June). Fracture testing of a soft rock with semi-circular specimens under three-point bending. Part 2 – Mixed-mode. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 31, 199–212. Pergamon.
- Murphy, H. D., & Fehler, M. C. (1986, March 17–20). Hydraulic fracturing of jointed formations. SPE 14088, presented at the SPE International Meeting on Petroleum Engineering, Beijing.
- Olson, J. E., Bahorich, B., & Holder, J. (2012, February 6–8). Examining hydraulic fracture – Natural fracture interaction in hydrostone block experiments. SPE 152618, presented at the SPE Hydraulic Fracturing Technology Conference, The Woodlands, TX.
- Potluri, N., Zhu, D., & Hill, A. D. (2005, May 25–27). Effect of natural fractures on hydraulic fracture propagation. SPE 94568, presented at the SPE European formation damage Conference, Scheveningen, Netherlands.
- Rahman, M. M., & Rahman, M. K. (2010). A review of hydraulic fracture models and development of an improved pseudo-3D model for stimulating tight oil/gas sand. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 32, 1416–1436.10.1080/15567030903060523
- Rodgerson, J. L. (2000, March 21–23). Impact of natural fractures in hydraulic fracturing of tight gas sands. SPE 59540, presented at the SPE Permian Basin Oil and Gas Recovery Conference, Midland, TX.
- Sato, K., Itaoka, M., & Hashida, T. (2013, April). FEM simulation of mixed mode crack propagation induced by hydraulic fracturing. In ICF10. Honolulu, HI, USA, 2001.
- Schmidt, R. A. (1980). Microcrack model and its significance to hydraulic fracturing and fracture toughness testing (No. SAND-79-2318A; CONF-800507-2). Albuquerque, NM: Sandia Labs.
- Suarez-Rivera, R., Burghardt, J., Stanchits, S., Edelman, E., & Surdi, A. (2013, March 26–28). Understanding the effect of rock fabric on fracture complexity for improving completion design and well performance. IPTC 17018, presented at the International Petroleum Technology Conference, Beijing.
- Thiercelin, M., & Makkhyu, E. (2007, May 27–31). Stress field in the vicinity of a natural fault activated by the propagation of an induced hydraulic fracture. In Proceedings of the 1st Canada-US Rock Mechanics Symposium, Vancouver.
- Tie, Y., Wei, L., & Xueliang, B. (2011). An experimental study of fracture initiation mechanisms during hydraulic fracturing. Petroleum Science, 8, 87–92.
- Vinod, P. S., Flindt, M. L., Card, R. J., & Mitchell, J. P. (1997, March 9–11). Dynamic fluid-loss studies in low-permeability formations with natural fractures. SPE 37486, presented at the SPE Production Operations Symposium, Tulsa, OK.
- Warpinski, N. R. (1991). Hydraulic fracturing in tight, fissured media. Journal of Petroleum Technology, 146–152, 208–209.
- Warpinski, N. R., & Teufel, L. W. (1987). Influence of geologic discontinuities on hydraulic fracture propagation. Journal of Petroleum Technology, 39, 209–220.10.2118/13224-PA
- Wu, R. (2006). Some fundamental mechanisms of hydraulic fracturing (Doctoral dissertation). Atlanta, GA: Georgia Institute of Technology.
- Zhang, X., & Jeffrey, R. G. (2006). The role of friction and secondary flaws on deflection and re-initiation of hydraulic fractures at orthogonal pre-existing fractures. Geophysical Journal International, 166, 1454–1465.10.1111/gji.2006.166.issue-3
- Zhou, J., Chen, M., Jin, Y., & Zhang, G. (2008). Analysis of fracture propagation behaviour and fracture geometry using a tri-axial fracturing system in naturally fractured reservoirs. International Journal of Rock Mechanics and Mining Sciences, 45, 1143–1152.10.1016/j.ijrmms.2008.01.001
- Zhou, J., Jin, Y., & Chen, M. (2010). Experimental investigation of hydraulic fracturing in random naturally fractured blocks. International Journal of Rock Mechanics and Mining Sciences, 47, 1193–1199.10.1016/j.ijrmms.2010.07.005