233
Views
8
CrossRef citations to date
0
Altmetric
Articles

Novel anticorrosive zinc phosphate coating for corrosion prevention of reinforced concrete

, , &
Pages 572-593 | Received 19 Dec 2014, Accepted 04 Jan 2016, Published online: 01 Feb 2016

References

  • Adhikari, S., Unocic, K. A., Zhai, Y., Frankel, G. S., Zimmerman, J., & Fristad, W. (2011). Hexafluorozirconic acid based surface pretreatments: Characterization and performance assessment. Electrochimica Acta, 56, 1912–1924.10.1016/j.electacta.2010.07.037
  • Alonso, C., Andrade, C., Castellote, M., & Castro, P. (2000). Chloride threshold values to depassivate reinforcing bars embedded in a standardized OPC mortar. Cement and Concrete Research, 30, 1047–1055.10.1016/S0008-8846(00)00265-9
  • Andrade, C., Alonso, A., & Al. (2004). Test method for on-site corrosion rate measurement of steel reinforcement in concrete by means of the polarization resistance method. RILEM TC 154-EMC: Electrochemical Techniques for Measuring Metallic Corrosion – Recommendations, Materials and Structures, 37, 623–643.
  • Andreatta, F., Paussa, L., Lanzutti, A., Rosero Navarro, N. C., Aparicio, M., Castro, Y., Duran, A., Ondratschek, D., & Fedrizzi, L. (2011, September–October). Development and industrial scale-up of ZrO2 coatings and hybrid organic–inorganic coatings used as pre-treatments before painting aluminium alloys. Progress in Organic Coatings, 72, 3–14.10.1016/j.porgcoat.2011.01.011
  • ASTM Standard C876-99. (1999). Standard Test Method for Half-Cell Potentials of Uncoated Reinforcing Steel in Concrete. West Conshohocken, PA: ASTM International. doi: 10.1520/C0876-91R99, Www.Astm.Org. (1999).
  • Burokas, V., Martušienė, A., & Bikulčius, G. (1998). The influence of hexametaphosphate on formation of zinc phosphate coatings for deep drawing of steel tubes. Surface and Coatings Technology, 102, 233–236.10.1016/S0257-8972(98)00359-4
  • Castagnola, M. J., & Dutta, P. K. (2001). Raman microprobe studies of dissolution of microporous faujasitic-like zincophosphate crystals. Microporous and Mesoporous Materials, 42, 235–243.10.1016/S1387-1811(00)00324-3
  • Frost, R. L. (2004). An infrared and Raman spectroscopic study of natural zinc phosphates. Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, 60, 1439–1445.10.1016/j.saa.2003.08.009
  • González, J. A., Ramı́rez, E., & Bautista, A. (1998). Protection of Steel Embedded in Chloride-Containing Concrete by means of Inhibitors. Cement Concrete Research, 28, 577–589.10.1016/S0008-8846(98)00014-3
  • Guenbour, A., Benbachir, A., & Kacemi, A. (1999). Evaluation of the corrosion performance of zinc-phosphate-painted carbon steel. Surface and Coatings Technology, 113, 36–43.10.1016/S0257-8972(98)00816-0
  • Hurley, M. F. (2007). Corrosion initiation and propagation behaviour of corrosion resistant concrete reinforcing materials (PhD thesis). University of Virginia, USA.
  • Kouisni, L., Azzi, M., Zertoubi, M., Dalard, F., & Maximovitch, S. (2004). Phosphate coatings on magnesium alloy AM60 part 1: Study of the formation and the growth of zinc phosphat. Surface & Coatings Technology, 185, 58–67.
  • Li, L., & Sagüés, A. A. (2001). Chloride corrosion threshold of reinforcing steel in alkaline solutions—open-circuit immersion tests. Corrosion, 57, 19–28.10.5006/1.3290325
  • Lorin, G. (1973). La phosphatation des métaux. Paris: Editions Eyrolles, p. 229.
  • Manna, M. (2009). Characterisation of phosphate coatings obtained using nitric acid free phosphate solution on three steel substrates: An option to simulate TMT rebars surfaces. Surface & Coatings Technology, 203, 1913–1918.
  • Nedal, Mohamed. (2009). Comparative Study of the Corrosion Behaviour of Conventional Carbon Steel and Corrosion Resistant Reinforcing Bars. A Thesis Submitted for the Degree of Master of Science University of Saskatchewan. August 2009.
  • Palaniappa, M., Babu, G., & Balasubramanian, K. (2007). Electroless nickel–phosphorus plating on graphite powder. Materials Science and Engineering A, 471, 165–168.10.1016/j.msea.2007.03.004
  • Psychoyos, N. (1990). Traitements de preconversion des tolesrevetues de zinc: Caracterisation physico-chimique des couches creees (Thesis), Lyon-1 Univ., France.
  • Simescu, F. L. (2008). Elaboration des revêtements de phosphates de zinc sur armature à béton. Etude de leur comportement à la corrosion en milieu neutre et alcalin (PhD thesis). INSA de Lyon – DOC'INSA – CITHER, France.
  • Simescu, F., & Idrissi, H. (2009). Corrosion behaviour in alkaline medium of zinc phosphate coated steel obtained by cathodic electrochemical treatment. Corrosion Science, 51, 833–840.10.1016/j.corsci.2009.01.010
  • Veleva, L., Alpuche-Aviles, M. A., Graves-Brook, M. K., & Wipf, D. O. (2005). Voltammetry and surface analysis of AISI 316 stainless steel in chloride-containing simulated concrete pore environment. Journal of Electroanalytical Chemistry, 578, 45–53.10.1016/j.jelechem.2004.12.019
  • Ying, J. F., Flinn, B. J., Zhou, M. Y., Wong, P. C., Mitchell, K. A. R & Fostert, T. (1995, September–December). Optimization of zinc phosphate coating on 7075-T6 aluminum alloy. Progress in Surface Science, 50, 259–267.10.1016/0079-6816(95)00060-7
  • Zeng, R., Lan, Z., Kong, L., Huang, Y., & Cui, H. (2011, 25 February). Characterization of calcium-modified zinc phosphate conversion coatings and their influences on corrosion resistance of AZ31 alloy. Surface and Coatings Technology, 205, 3347–3355.10.1016/j.surfcoat.2010.11.027
  • Zimmermann, D., Mun˜oz, A. G., & Schultze, J. W. (2005). Formation of Zn–Ni alloys in the phosphating of Zn layers. Surface & Coatings Technology, 197, 260–269.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.