Durability and thermal stability of ultra high-performance fibre-reinforced concrete (UHPFRC) incorporating calcined clay

References

• AFPC-AFREM. (1997). Durabilité des béton-Méthodes recommandées pour la mesure des grandeurs associées à la durabilité des bétons  [Durability of Concrete. Recommended methods for measuring the quantities related to the durability of concrete]. Toulouse: INSA-LMDC.
   Google Scholar
• Alarcon-Ruiz, L., Platret, G., Massieu, E., & Ehrlacher, A. (2005). The use of thermal analysis in assessing the effect of temperature on a cement paste. Cement and Concrete Research, 35, 609–613.10.1016/j.cemconres.2004.06.015
   Web of Science ®Google Scholar
• Al-Azzawi, A. A., Ali, A. S., & Risan, H. K. (2011). Behavior of ultra high performance concrete structures. Journal of Engineering and Applied Sciences, 6, 95–109.
   Google Scholar
• Alonso, C., & Fernandez, L. (2004). Dehydration and rehydration processes of cement paste exposed to high temperature environments. Journal of Materials Science, 39, 3015–3024.10.1023/B:JMSC.0000025827.65956.18
   Web of Science ®Google Scholar
• Babanajad, S. K., Yaghoob, F., & Shekarchi, M. (2012). Failure criteria and triaxial behaviour of HPFRC containing high reactivity metakaolin and silica fume. Construction and Building Materials, 29, 215–229.10.1016/j.conbuildmat.2011.08.094
   Web of Science ®Google Scholar
• Bazant, Z. P., & Kaplan, M. F. (1996). Concrete at high temperatures : Material properties and mathematicalmodels. Harlow: Ed. Longman.
   Google Scholar
• Bénoît, O. (1969). Détermination de l’activité pouzzolanique d’une pouzzolane par voie Chimique [Determination of pozzolanic activity of a pozzolan by chemical track]. Bull liaison labo. P. et Ch [Bulletin Linking Road Laboratories, bridges and roads], 26, D1–D5.
   Google Scholar
• Bonneau, O., Lachemi, M., Dallaire, E., Dugat, J., & Aitcin, P. C. (1997). Mechanical properties and durability of two industrial reactive powders concretes. ACI Materials Journal, 94, 286–290.
   Web of Science ®Google Scholar
• Castellote, M., Alonso, C., Andrade, C., Turrillas, X., & Campo, J. (2004). Composition and microstructural changes of cement pastes upon heating, as studied by neutron diffraction. Cement and Concrete Research, 34, 1633–1644.10.1016/S0008-8846(03)00229-1
   Web of Science ®Google Scholar
• Chinje, M., & Billong, U. N. (2004). Activité pouzzolanique des déchets de briques et tuiles  [Pozzolanic activity of brick waste and tiles]. African Journal of Science and Technology (AJST) Science Engineering Series, 5, 92–100.
   Google Scholar
• Consolazio, G. R., Mcvay, M. C., & Rish, J. W. (1997). Measurement and prediction of pore pressure in cement mortar subjected to elevated temperature (pp. 125–148). Gaithersburg, MD: International Workshop of Fire Performance of High Strength Concrete.
   Google Scholar
• Diederichs, U., Jumppanen, U. M., & Penttala, V. (1989). Behaviour of high strength concrete at high temperatures ( Report no. 92). Helsinki: University of Technology, Department of structural engineering.
   Google Scholar
• Frı́as, M., de Rojas, M. I. S., & Cabrera, J. (2000). The effect that the pozzolanic reaction of metakaolin has on the heat evolution in metakaolin-cement mortars. Cement Concrete Research, 30, 209–216.10.1016/S0008-8846(99)00231-8
   Web of Science ®Google Scholar
• Jensen, M., & Hansen, P. F. (1999). Influence of temperature on autogenous deformation and relative humidity change in hardening cement paste. Cement and Concrete Research, 29, 567–575.10.1016/S0008-8846(99)00021-6
   Web of Science ®Google Scholar
• Kalifa, P., Menneteau, F. D., & Quenard, D. (2000). Spalling and pore pressure in HPC at high temperatures. Cement and Concrete Research, 30, 1915–1927.10.1016/S0008-8846(00)00384-7
   Web of Science ®Google Scholar
• Khoury, G. A. (1995). Strain components of nuclear-reactor-type concretes during first heat cycle. Nuclear Engineering and Design, 156, 313–321.10.1016/0029-5493(94)00969-6
   Web of Science ®Google Scholar
• Kim, J. K., Han, S. H., Park, Y. D., Noh, J. H., Park, C. L., Kwon, Y. H., & Lee, S. G. (1996). Experimental research on the material properties of super flowing concrete. In P. J. M. Bartos, D. L. Marrs, D. J. Cleland, (Eds.), Production methods and workability of concrete (pp. 271–284). London: E&FN Spon.
   Google Scholar
• Michel, V. (1989). La pratique des ciments, mortiers et bétons’ [The practice of cements, mortars and concretes’]. Paris: Edition Le Moniteur.
   Google Scholar
• NF EN 196-1. (2006). Cement. Part 1: Composition, specification and conformity criteria for common cements. Saint-Denis: AFNOR.
   Google Scholar
• Noumowé, A. (1995). Effets des hautes températures (20 - 600°C) sur le béton. Cas particulier du béton à hautes performances [Effects of high temperatures (20 - 600°C) on the concrete. Special case of high performance concrete] ( Ph.D Thesis, Institut National des Sciences Appliquées, Lyon, France). No. 95 ISAL 0092, p. 232.
   Google Scholar
• Noumowe, A., & Debicki, G. (2002). Effect of elevated temperature from 200 to 600 °C on the permeability of HPC. In K. Nig, G. F. Dehn, & T. Faust (Eds.), Symposium on utilization of high strength/high performance concrete (pp. 431–444). Leipzig: University of Leipzig.
   Google Scholar
• NT BUILD 492. (1999). Concrete, mortar and cement-based repair materials: chloride migration coefficient from non-steady-state migration experiments. Nordtest method. Finland.
   Google Scholar
• Poon, C. S., Lam, L., Kou, S. C., Wong, Y. L., & Wong, R. (2001). Rate of pozzolanic reaction of metakaolin in high performance cement pastes. Cement and Concrete Research, 31, 1301–1306.10.1016/S0008-8846(01)00581-6
   Web of Science ®Google Scholar
• Poon, C. S., Kou, S. C., & Lam, L. (2006). Compressive strength, chloride diffusivity and pore structure of high performance metakaolin and silica fume concrete. Construction and Building Materials, 20, 858–865.10.1016/j.conbuildmat.2005.07.001
   Web of Science ®Google Scholar
• Rabehi, B., Boumchedda, K., & Ghernouti, Y. (2010). Study of calcined halloysite clay as pozzolanic material and its potential use in mortars. International Journal of the Physical Sciences, 7, 5179–5192.
   Google Scholar
• Rabehi, B., Ghernouti, Y., & Boumchedda, K. (2013). Strength and compressive behaviour of ultra high-performance fibre-reinforced concrete (UHPFRC) incorporating Algerian calcined clays as pozzolanic materials and silica fume. European Journal of Environmental and Civil Engineering, 17, 599–615.10.1080/19648189.2013.802998
   Web of Science ®Google Scholar
• Rafat, S., & Juvas, K. (2009). Influence of metakaolin on the properties of mortar and concrete: A rewiew. Applied Clay Science, 43, 392–400.
   Web of Science ®Google Scholar
• Richard, P., & Cheyrezy, M. H. (1995). Composition of reactive powder concretes. Cement Concrete Research, 25, 1501–1511.10.1016/0008-8846(95)00144-2
   Web of Science ®Google Scholar
• Sabir, B. B., Wild, S., & Khatib, J. M. (1996). On the workability and strength development of metakaolin concrete. In Proceeding of the international conference concrete in the service of mankind, environmental enhancement and protection (vol. 24–28, pp. 651–662). London: University of Dundee Spon.
   Google Scholar
• Sabir, B. B., Wild, S., & Bai, J. (2001). Metakaolin and calcined clays as pozzolans for concrete: A review. Cement and Concrete Composites, 23, 441–454.10.1016/S0958-9465(00)00092-5
   Web of Science ®Google Scholar
• Samet, B., Mnif, T., & Chaabouni, M. (2007). Use of a kaolinitic clay as a pozzolanic material for cements: Formulation of blended cement. Cement and Concrete Composites, 29, 741–749.10.1016/j.cemconcomp.2007.04.012
   Web of Science ®Google Scholar
• Schachinger, I., Hilbig, H., & Stengel, T. (2008). Effect of curing temperature at an early age on long-term strength development of UHPC. 2nd International Symposium on Ultra High Performance Concrete, Kassel, 05–07, March. pp. 205–212.
   Google Scholar
• Schneider, U., Diederich, U., & EHM, C. (1981). Effect of temperature on steel and concrete for PCRV’S. Nuclear engineering and design, 67, 245–258.
   Web of Science ®Google Scholar
• Schneider, U., Diederichs, U., & Ehm, C. (1982). Effect of temperature on steel and concrete for PCRV’s. Nuclear Engineering and Design, 67, 245–258.10.1016/0029-5493(82)90144-3
   Web of Science ®Google Scholar
• Shannag, M. J., & Shaia, H. A. (2003). Sulfate resistance of high-performance concrete. Cement & Concrete Composites, 25, 363–369.
   Web of Science ®Google Scholar
• Tafraoui, A., Escadeillas, G., Soltane, L., & Thierry, V. (2009). Metakaolin in the formulation of UHPC. Construction and Building Materials, 23, 669–674.10.1016/j.conbuildmat.2008.02.018
   Web of Science ®Google Scholar
• Wild, S., & Khatib, J. M. (1997). Portlandite consumption in metakaolin cement pastes and mortars. Cement Concrete Research, 27, 137–146.10.1016/S0008-8846(96)00187-1
   Web of Science ®Google Scholar
• Young-Shik, P., Jin-Kook, S., Jae-Hoon, L., & Young-Shik, S. (1999). Strength deterioration of high strength concrete in sulfate environment. Cement and Concrete Research, 29, 1397–1402.
   Web of Science ®Google Scholar
• Zhang, M. H., & Malhotra, V. M. (1995). Characteristics of a thermally activated alumino-silicate pozzolanic material and its use in concrete. Cement and Concrete Research, 25, 1713–1725.10.1016/0008-8846(95)00167-0
   Web of Science ®Google Scholar