Numerical study of the influence of drying on properties governing the carbonation mechanism of concretes with low clinker content

References

• ACI Committee 207. (1994). Mass concrete, ACI manual of concrete practice, part 1. Detroit, MI: American Concrete Institute.
   Google Scholar
• Andrade, C., & Buják, R. (2013). Effects of some mineral additions to Portland cement on reinforcement corrosion. Cement and Concrete Research, 53, 59–67.10.1016/j.cemconres.2013.06.004
   Web of Science ®Google Scholar
• Bažant, Z. P. (1986). Fourth RILEM International Symposium on Creep and Shrinkage of Concrete, Mathematical Modeling. Evanstone, IL.
   Google Scholar
• Bažant, Z. P., & Najjar, L. J. (1972). Nonlinear water diffusion in nonsaturated concrete. Materials and Structures, 5, 3–20.
   Google Scholar
• Bentz, D. P. (2000). Influence of silica fume on diffusivity in cement-based materials: II. Multi-scale modeling of concrete diffusivity. Cement and Concrete Research, 30, 1121–1129.10.1016/S0008-8846(00)00263-5
   Web of Science ®Google Scholar
• Bentz, D. P., Snyder, K. A., & Stutzman, P. E. (1997). Hydration of Portland cement: The effects of curing conditions. In H. Justnes (Ed.), 10th International Conference on Cement Chemistry (Vol. 2). (Amarkai AB and Congrex Goteborg AB, Goteburg). Goteburg.
   Google Scholar
• Bernard, O., & Brühwiler, E. (2002). Influence of autogenous shrinkage on early age behaviour of structural elements consisting of concretes of different ages. Materials and Structures, 35, 550–556.10.1617/13753
   Web of Science ®Google Scholar
• Bogue, R. H. (1952). La chimie du ciment de Portland [The chemistry of portland cement]. Éditions Eyrolles. Paris, France.
   Google Scholar
• Carmeliet, J. (1992). Duurzaamheid van weefselgewapende pleisters voor buitenisolatie [Durability of tissue reinforced plasters for exterior insulation]. (PhD thesis). Delft University of Technology.
   Google Scholar
• Chern, J. C., & Chan, Y. W. (1989). Deformations of concrete made with blast-furnace slag cement and ordinary Portland cement. ACI Materials Journal, 86, 372–382.
   Web of Science ®Google Scholar
• Collins, F. (2010). Inclusion of carbonation during the life cycle of built and recycled concrete: Influence on their carbon footprint. The International Journal of Life Cycle Assessment, 15, 549–556.10.1007/s11367-010-0191-4
   Web of Science ®Google Scholar
• Darquennes, A. (2009). Comportement au jeune âge de bétons formulés à base de ciment au laitier de haut-fourneau en condition de déformations libre et restreinte [Behavior at early age of blast furnace slag cement-based concretes under free and restricted deformations conditions]. (PhD thesis). Brussels: Université Libre de Bruxelles.
   Google Scholar
• Delmi, M. M. Y., Aı¨t-Mokhtar, A., & Amiri, O. (2006). Modelling the coupled evolution of hydration and porosity of cement-based materials. Construction and Building Materials, 20, 504–514.10.1016/j.conbuildmat.2004.12.004
   Web of Science ®Google Scholar
• Drouet, E., Poyet, S., & Torrenti, J. M. (2015). Temperature influence on water transport in hardened cement pastes. Cement and Concrete Research, 76, 37–50.
   Web of Science ®Google Scholar
• EN 1992-1-1. Eurocode 2. (2004). Design of concrete structures. In AFNOR (Ed.), Paris.
   Google Scholar
• Faria, R., Azenha, M., & Figueiras, J. A. (2006). Modelling of concrete at early ages: Application to an externally restrained slab. Cement and Concrete Composites, 28, 572–585.10.1016/j.cemconcomp.2006.02.012
   Web of Science ®Google Scholar
• Flower, D. J. M., & Sanjayan, J. G. (2007). Green house gas emissions due to concrete manufacture. The International Journal of Life Cycle Assessment, 12, 282–288.10.1007/s11367-007-0327-3
   Web of Science ®Google Scholar
• Gruyaert, E., Van den Heede, P., & De Belie, N. (2013). Carbonation of slag concrete: Effect of the cement replacement level and curing on the carbonation coefficient – Effect of carbonation on the pore structure. Cement and Concrete Composites, 35, 39–48.10.1016/j.cemconcomp.2012.08.024
   Web of Science ®Google Scholar
• Kamen, A., Denarié, E., Sadouki, H., & Brühwiler, E. (2008). Thermo-mechanical response of UHPFRC at early age – Experimental study and numerical simulation. Cement and Concrete Research, 38, 822–831.10.1016/j.cemconres.2008.01.009
   Web of Science ®Google Scholar
• Kang, S. T., Kim, J. S., Lee, Y., Park, Y. D., & Kim, J. K. (2012). Moisture diffusivity of early age concrete considering temperature and porosity. KSCE Journal of Civil Engineering, 16, 179–188.10.1007/s12205-012-1445-4
   Web of Science ®Google Scholar
• Khokhar, M. I. A., Roziere, E., Turcry, Ph, Grondin, F., & Loukili, A. (2010). Mix design of concrete with high content of mineral additions: Optimisation to improve early age strength. Cement and Concrete Composites, 32, 377–385.10.1016/j.cemconcomp.2010.01.006
   Web of Science ®Google Scholar
• Kim, J.-K., & Lee, C.-S. (1998). Prediction of differential drying shrinkage in concrete. Cement and Concrete Research, 28, 985–994.10.1016/S0008-8846(98)00077-5
   Web of Science ®Google Scholar
• Kolani, B., Buffo-Lacarrière, L., Sellier, A., Escadeillas, G., Boutillon, L., & Linger, L. (2012). Hydration of slag-blended cements. Cement and Concrete Composites, 34, 1009–1018.10.1016/j.cemconcomp.2012.05.007
   Web of Science ®Google Scholar
• Malhotra, V. M., & Mehta, P. K. (2005). High-performance, high-volume fly ash concrete: Materials, mixture proportioning, properties, construction practice, and case histories. Ottawa: Supplementary Cementing Materials for Sustainable Development.
   Google Scholar
• Martinelli, E., Koenders, E. A. B., & Caggiano, A. (2013). A numerical recipe for modelling hydration and heat flow in hardening concrete. Cement and Concrete Composites, 40, 48–58.10.1016/j.cemconcomp.2013.04.004
   Web of Science ®Google Scholar
• Meinhard, K., & Lackner, R. (2008). Multi-phase hydration model for prediction of hydration-heat release of blended cements. Cement and Concrete Research, 38, 794–802.10.1016/j.cemconres.2008.01.008
   Web of Science ®Google Scholar
• Mensi, R., Acker, P., & Attolou, A. (1988). Séchage du béton: Analyse et modélisation [Drying of concrete: Analysis and modelling]. Materials and Structures, 21, 3–12.10.1007/BF02472523
   Google Scholar
• Merzouki, T., Bouasker, M., Houda Khalifa, N. E. L., & Mounanga, P. (2013). Contribution to the modeling of hydration and chemical shrinkage of slag-blended cement at early age. Construction and Building Materials, 44, 368–380.10.1016/j.conbuildmat.2013.02.022
   Web of Science ®Google Scholar
• Min, Y., Jueshi, Q., & Ying, P. (2008). Activation of fly ash-lime systems using calcined phosphogypsum. Construction and Building Materials, 22, 1004–1008.10.1016/j.conbuildmat.2006.12.005
   Web of Science ®Google Scholar
• MLS-User Manual. (2003). Computer program for the analysis of the thermal and mechanical behavior of hardening concrete (version 8.5). FEMMASSE (Finite Element Modules for Materials Science and Structural Engineering), BV, Geldermalsen, BEJ Baetens INTRON BV, The Netherland.
   Google Scholar
• Mounanga, P. (2003). Etude expérimentale du comportement de pâtes de ciment au très jeune âge: hydratation, retrait, propriétés thermophysiques [Experimental study of the behavior of cement pastes at very early age: Hydration, shrinkage and thermophysical properties], in French. Université de Nantes.
   Google Scholar
• Odler, I. (1991). Strength of cement (final report). Materials and Structures, 24, 143–157.10.1007/BF02472476
   Web of Science ®Google Scholar
• Omikrine-Metalssi, O., & Aït-Mokhtar, A. (2009). A proposed methodology for a quantitative investigation of carbonation in polymer-modified mortars. Experimental Techniques, 33, 59–65.10.1111/ext.2009.33.issue-6
   Web of Science ®Google Scholar
• Omikrine-Metalssi, O., Aït-Mokhtar, A., Turcry, Ph, & Ruot, B. (2012). Consequences of carbonation on microstructure and drying shrinkage of a mortar with cellulose ether. Construction and Building Materials, 34, 218–225.10.1016/j.conbuildmat.2012.02.044
   Web of Science ®Google Scholar
• Pacheco Torgal, F., Miraldo, S., Labrincha, J. A., & De Brito, J. (2012). An overview on concrete carbonation in the context of eco-efficient construction: Evaluation, use of SCMs and/or RAC. Construction and Building Materials, 36, 141–150.10.1016/j.conbuildmat.2012.04.066
   Web of Science ®Google Scholar
• Papadakis, V. G. (2000). Effect of supplementary cementing materials on concrete resistance against carbonation and chloride ingress. Cement and Concrete Research, 30, 291–299.10.1016/S0008-8846(99)00249-5
   Web of Science ®Google Scholar
• Papadakis, V. G., Vayenas, C. G., & Fardis, M. N. (1989). A reaction engineering approach to the problem of concrete carbonation. Journal of American Institute of Chemical Engineers, 1, 110–122.
   Google Scholar
• Patel, R. G., Killoh, D. C., Parrott, L. J., & Gutteridge, W. A. (1988). Influence of curing at different relative humidities upon compound reactions and porosity in Portland cement paste. Materials and Structures, 21, 192–197.10.1007/BF02473055
   Google Scholar
• Poyet, S. (2013). Determination of the intrinsic permeability to water of cementitious materials: Influence of the water retention curve. Cement and Concrete Composites, 35, 127–135.10.1016/j.cemconcomp.2012.08.023
   Web of Science ®Google Scholar
• Qin, M., Belarbi, R., Aït-Mokhtar, A., & Nilsson, L.-O. (2008). Simultaneous heat and moisture transport in porous building materials: Evaluation of nonisothermal moisture transport properties. Journal of Materials Science, 43, 3655–3663.10.1007/s10853-008-2584-3
   Web of Science ®Google Scholar
• Roelfstra, P. E. (1989). A numerical approach to investigate the properties of concrete, numerical concrete (PhD thesis). Lausanne:  EPF-Lausanne.
   Google Scholar
• Roels, S. (2008). IEA Annex 41, Whole building heat, air, moisture response. Subtask 2: Experimental analysis of moisture buffering. Technical Report. International Energy Agency, Report, KU Leuven, Belgium.
   Google Scholar
• Rosković, R., & Bjegović, D. (2005). Role of mineral additions in reducing CO2 emission. Cement and Concrete Research, 35, 974–978.10.1016/j.cemconres.2004.04.028
   Web of Science ®Google Scholar
• Roy, D. M., & Idorn, G. M. (1982). Development of structure and properties of blast furnace slag cements. International Conference on Slag and Blended Cements. Birmingham.
   Google Scholar
• Rozière, E., Loukili, A., & Cussigh, F. (2009). A performance based approach for durability of concrete exposed to carbonation. Construction and Building Materials, 23, 190–199.10.1016/j.conbuildmat.2008.01.006
   Web of Science ®Google Scholar
• Saul, A. G. A. (1951). Principles underlying the steam curing of concrete at atmospheric pressure. Magazine of Concrete Research, 2, 127–140.10.1680/macr.1951.2.6.127
   Google Scholar
• Schindler, A. K., & Folliard, K. J. (2005). Heat of hydration models for cementitious materials. ACI Materials Journal, 102, 24–33.
   Web of Science ®Google Scholar
• Snyder, K. A., & Bentz, D. P. (2004). Suspended hydration and loss of freezable water in cement pastes exposed to 90% relative humidity. Cement and Concrete Research, 34, 2045–2056.10.1016/j.cemconres.2004.03.007
   Web of Science ®Google Scholar
• Thiery, M., Villain, G., Dangla, P., & Platret, G. (2007). Investigation of the carbonation front shape on cementitious materials: Effects of the chemical kinetics. Cement and Concrete Research, 37, 1047–1058.10.1016/j.cemconres.2007.04.002
   Web of Science ®Google Scholar
• Trabelsi, A., Belarbi, R., Turcry, P., & Aït-Mokhtar, A. (2011). Water vapour desorption variability of in situ concrete and effects on drying simulations. Magazine of Concrete Research, 63, 333–342.10.1680/macr.9.00161
   Web of Science ®Google Scholar
• Turcry, Ph, Oksri-Nelfia, L., Younsi, A., & Aït-Mokhtar, A. (2014). Analysis of an accelerated carbonation test with severe preconditioning. Cement and Concrete Research, 57, 70–78.10.1016/j.cemconres.2014.01.003
   Web of Science ®Google Scholar
• Xi, Y., Bažant, Z. P., & Jennings, H. M. (1994). Moisture diffusion in cementitious materials: Adsorption isotherms. Advanced Cement Based Materials, 1, 248–257.10.1016/1065-7355(94)90033-7
   Google Scholar
• Xi, Y., Siemer, D. D., & Scheetz, B. E. (1997). Strength development, hydration reaction and pore structure of autoclaved slag cement with added silica fume. Cement and Concrete Research, 27, 75–82.10.1016/S0008-8846(96)00196-2
   Web of Science ®Google Scholar
• Xin, D., Zollinger, D. G., & Allen, G. D. (1995). An approach to determine diffusivity in hardening concrete based on measured humidity profiles. Advanced Cement Based Materials, 2, 138–144.10.1016/1065-7355(95)90014-4
   Google Scholar
• Younsi, A. (2011). Carbonatation de bétons à forts taux de substitution du ciment par des additions minérales [Carbonation of concrete with a high rate of substitution of cement by mineral additions].(PhD thesis). La Rochelle: University of La Rochelle.
   Google Scholar
• Younsi, A., Turcry, P., Aït-Mokhtar, A., & Staquet, S. (2013). Accelerated carbonation of concrete with high content of mineral additions: Effect of interactions between hydration and drying. Cement and Concrete Research, 43, 25–33.10.1016/j.cemconres.2012.10.008
   Web of Science ®Google Scholar
• Younsi, A., Turcry, Ph, Rozière, E., Aït-Mokhtar, A., & Loukili, A. (2011). Performance-based design and carbonation of concrete with high fly ash content. Cement and Concrete Composites, 33, 993–1000.10.1016/j.cemconcomp.2011.07.005
   Web of Science ®Google Scholar
• Zhang, P., Wittmann, F. H., Villmann, B., Zhao, T. J., & Slowik, V. (2008). Moisture diffusion in and capillary suction of integral water repellent cement based materials. 5th International Conference on Water Repellent Treatment of Building Materials. Brussels.
   Google Scholar
• Zhou, J., Ye, G., Schlangen, E., & van Breugel, K. (2008). Modelling of stresses and strains in bonded concrete overlays subjected to differential volume changes. Theoretical and Applied Fracture Mechanics, 49, 199–205.10.1016/j.tafmec.2007.11.006
   Web of Science ®Google Scholar