A 4pt bending bond test approach to evaluate water effect in a composite beam

References

• Barman, M., Vandenbossche, J., Mu, F., Gatti, K. (2011). Development of design guide for thin and ultra-thin concrete overlays of existing asphalt pavements, task 1 report : Compilation and review of existing performance data and information. Technical report, FHWA Pooled Fund Study TPF 5-65, Retrieved from https://www.engineering.pitt.edu/uploadedFiles/_Content/Sub_Sites/Faculty_Subsites/Vandenbossche/Documents/TPF%205-165%20Task%201%20Final%20Report.pdf
   Google Scholar
• Bui, H. (1978). Mécanique de la rupture fragile. Paris: Ed Masson.
   Google Scholar
• Caron, J. F., Diaz Diaz, A., Carreira, R. P., Chabot, A., & Ehrlacher, A. (2006). Multi-particle modeling for the prediction of delamination in multi-layered materials. Composites Science and Technology, 66, 755–765. doi:10.1016/j.compscitech.2004.12.022
   Web of Science ®Google Scholar
• Chabot, A. (1997). Analyse des efforts à l’interface entre les couches des matériaux composites à l’aide de Modélisations Multiparticulaires des Matériaux Multicouches (M4). ENPC (PhD thesis), Paris. Retrieved from https://tel.archives-ouvertes.fr/tel-00197853
   Google Scholar
• Chabot, A., Buttlar, B., Dave, E., Petit, C., Tebaldi, G. (Eds.). (2016a). Cracking and debonding in pavements’.1st ed. 8th RILEM International Conference on Mechanisms of Cracking and Debonding in Pavements. Springer Series: RILEM Bookseries (Vol. 13). Nantes, France. ISBN 978-94-024-0866-9, doi:10.1007/978-94-024-0867-6
   Google Scholar
• Chabot, A., Cantournet, S., & Ehrlacher, A. (2000). Analyse de taux de restitution d’énergie par un modèle simplifié pour un quadricouche en traction fissuré à l’interface entre 2 couches [Simplifed modeling analysis of the energy release rate of the debonding interface between two layers in a 4 layers laminate in tension]. JNC12, ENS de Cachan (Vol. 2, pp. 775–784). ISBN 2-9515965-0-2.
   Google Scholar
• Chabot, A., & Ehrlacher, A. (1998). Modèles Multiparticulaires des Matériaux Multicouches M4_5n et M4_(2n+1)M pour l’étude des effets de bord. In Proceedings of the Comptes-rendus aux 11ème Journées Nationales sur les Composites (JNC11), 18–20 November (Vol. 3, pp. 1389–1397). Arcachon. Retrieved from https://hal.archives-ouvertes.fr/hal-00325238/file/JNC11.pdf
   Google Scholar
• Chabot, A., Hammoum, F., & Hun, M. (2016b). Mixed – Mixed-mode debonding approach to evaluate water sensibility in bi-layer composite pavements. In 8th International conference on Mechanisms of Cracking and Debonding in Pavements (MCD2016), 7–9 June, Springer RILEM Bookseries (Vol. 13, pp. 613–618). Nantes, France. ISBN: 978-94-024-0867-6. doi: 10.1007/978-94-024-0867-6_86
   Google Scholar
• Chabot, A., Hun, M., & Hammoum, F. (2013a). Mechanical analysis of a mixed mode debonding test for ‘composite’ pavements. Construction and Building Materials, 40, 1076–1087. doi:10.1016/j.conbuildmat.2012.11.027
   Web of Science ®Google Scholar
• Chabot, A., Hun, M., & Hammoum, F. (2013b). Determination of energy release rate for a mixed-mode debonding test for «composite» pavements. In 6th International Symposium on defect and Material Mechanics, 1–5 July (pp. 31–32). ECN, France.
   Google Scholar
• Chabot, A., Pouteau, B., Balay, J.-M., & De Larrard, F. (2008). FABAC accelerated loading test of bond between cement overlay and asphalt layers. In Taylor & Francis Group Proceedings. Proceedings of the Sixth International RILEM Conference on Cracking in Pavements, 16–18 June (13–23). Chicago. Print ISBN 978-0-415-47575-4.
   Google Scholar
• Chabot,A., Tran, Q. D., & Ehrlacher, A. (2005). A simplified modeling for cracked pavements. Bulletin des Laboratoires des Ponts et chaussées, (258–259), 105–120. ISSN 1269-1496.
   Google Scholar
• Chabot,A., Tran, Q. D., & Ehrlacher, A. (2007). A modeling to understand where a vertical crack can propagate in pavements. In Taylor & Francis Group Proceedings. Proceedings of the International Conference on Advanced Characterization of Pavement and Soil Engineering Materials, 20–22 June (Vol. 1, pp. 431–440). Athens, Greece. Print ISBN 978-0-415-44882-6.
   Google Scholar
• Chabot, A., Tran, Q. D., & Pouteau, B. (2004). Simplified modelling of a cracked composite pavement. Poster presented at the first International Elsevier Conference on Failure Analysis, 12–14 July, Lisbonne, Portugal.
   Google Scholar
• Davidson, R., & Lee, R. J. (1995). Experimental methodologies to determine the fracture properties of adhesive joints. MTS Adhesives Project 2: Failure Modes and Criteria ReportN2, Retrieved from http://www.adhesivestoolkit.com/PDFFiles/Project%202/P2r2.pdf
   Google Scholar
• De Larrard, F., Chabot, A., Sedran, T., Pouteau, B., & Mathias, V. (2005). Recent developments in French concrete pavement technology. Global Construction: Ultimate concrete opportunities. In Proceedings of the International Conference on concrete for transportation Infrastructure, 5–7 July 2005 (pp. 19–26). Dundee, Scotland. Print ISBN: 978-0-7277-3402-0. doi:10.1680/cfti.34020
   Google Scholar
• Dundurs, J. (1969). Edge-bonded dissimilar orthogonal elastic wedges under normal and shear loading. Transactions of the ASME Journal of Applied Mechanics, 36, 650–652. doi:10.1115/1.3564739
   Web of Science ®Google Scholar
• Dupré, J. C., Doumalin, P., Valle, V., & Brémand, F. (2012). Mode d’emploi du logiciel correla V2012 [How to use the correla V2012 software]. Notice d’utilisation du logiciel [Software operating instructions].
   Google Scholar
• Gharbi, M., Nguyen, M. L., & Chabot, A. (2017). Experimental evaluation of the interface fracture energy for composite pavements. In The Proceedings of the 7th International EATA Conference, 12–14 June. Zürich, Switzerland.
   Google Scholar
• Hun, M. (2012). Influence de l’eau sur le décollement d’une interface par flexion d’un bicouche de chaussée urbaine (ECN PhD thesis), France. Retrieved from https://tel.archives-ouvertes.fr/tel-00851093
   Google Scholar
• Hun, M., Chabot, A., & Hammoum, F. (2012). A four point bending test for the bonding evaluation of composite pavement. In 7th Rilem International Conference on Cracking in Pavements, 20–22 June, Springer RILEM Bookseries (Vol. 4, pp. 51–60). Delft, The Netherlands. doi:10.1007/978-94-007-4566-7_6
   Google Scholar
• Hutchinson, J. W., Mear, M. E., & Rice, J. R. (1987). Crack paralleling interface between dissimilar materials. Journal of Applied Mechanics, 109, 828–832.10.1115/1.3173124
   Google Scholar
• Mateos, A., Harvey, J., Paniagua, J., Paniagua, F., & Fan, A. (2016). Role of concrete–asphalt interface in bonded concrete overlays of asphalt pavements. In 8th International conference on Mechanisms of Cracking and Debonding in Pavements (MCD2016), 7–9 June. Springer RILEM Bookseries, (Vol. 13, pp. 613–618), Nantes, France. ISBN: 978-94-024-0867-6. doi:10.1007/978-94-024-0867-6_68
   Google Scholar
• Mauduit, C., Hammoum, F., Piau, J. M., Mauduit, V., Ludwig, S., & Hamon, D. (2010). Quantifying expansion effects induced by Freeze-Thaw cycles in partially water saturated bituminous mix: Laboratory experiments. Road Materials and Pavement Design, 11(Suppl. 1), 443–457. doi:10.1080/14680629.2010.9690341
   Google Scholar
• Mauduit, V., Mauduit,C., Vulcano-Grellet, N., Coulon, N., Hammoum, F., Hamon, D., … Chabot, A. (2013). Dégradation subite des enrobés bitumineux par période de gel/dégel: analyse de cas de terrain et recherche exploratoire en laboratoire [Degradation experienced by asphalt road mixes during periods of freeze-thaw events: Analysis of field cases and exploratory laboratory research]. Bulletin des Laboratoires des Ponts et chaussées, 279, 47–63. ISSN 1269-1496.
   Google Scholar
• Moutou Pitti, R., Dubois, F., Petit, C., Sauvat, N., & Pop, O. (2008). A new M-integral parameter for mixed-mode crack growth in orthotropic viscoelastic material. Engineering Fracture Mechanics, 75, 4450–4465. doi:10.1016/j.engfracmech.2008.04.021
   Web of Science ®Google Scholar
• Mulian, G., & Rabinovitch, O. (2016). Experimental and analytical study of the dynamic debonding in FRP plated beams. International Journal of Solids and Structures, 92–93, 121–134. doi:10.1016/j.ijsolstr.2016.03.020
   Web of Science ®Google Scholar
• Naciri, T., Ehrlacher, A., & Chabot, A. (1998). Interlaminar stress analysis with a new multiparticle modelisation of multilayered materials (M4). Composites Sciences and Technology, 58, 337–343. doi:10.1016/S0266-3538(97)00085-7
   Web of Science ®Google Scholar
• Nasser, H., Piau, J. M., Chupin, O., Chabot, A. (2016). M4-5n numerical solution using the mixed FEM, validation against the finite difference method. In A. Chabot, et al. (Eds)., 8th International conference on mechanisms of cracking and debonding in pavements (MCD2016), 7–9 June, 2016. Springer RILEM Bookseries (Vol. 13, pp. 363–369). Nantes, France. ISBN: 978-94-024-0867-6. doi:10.1007/978-94-024-0867-6_51
   Google Scholar
• Pan, J., Leung, C. K. Y., & Luo, M. (2010). Effect of multiple secondary cracks on FRP debonding from the substrate of reinforced concrete beams. Construction and Building Materials, 24, 2507–2516. doi:10.1016/j.conbuildmat.2010.06.006
   Web of Science ®Google Scholar
• Perez, F., Bissonnette, B., & Gagné, R. (2009). Parameters affecting the debonding risk of bonded overlays used on reinforced concrete slab subjected to flexural loading. Materials and Structures, 42, 645–662. doi:10.1617/s11527-008-9410-x
   Web of Science ®Google Scholar
• Pouteau, B., Balay, J. M., Chabot, A., De Larrard, F. (2004). Fatigue test and mechanical study of adhesion between concrete and asphalt. In Proceedings of the 9th International Symposium on Concrete Roads, 3–6 April. Istanbul, Turkey.
   Google Scholar
• Raab, C., Partl, M. N., & Abd El Halim, A. O. (2012). Effect of moisture on interlayer bonding of asphalt pavements. 7th International Conference on Maintenance and Rehabilitation of Pavements and Technological Control, August 28–3. Auckland, New Zealand.
   Google Scholar
• Reissner, E. (1950). On a variational theorem in elasticity. Mathematical Physics, 29, 90–95.10.1002/sapm195029190
   Web of Science ®Google Scholar
• Roux, S., Rethore, J., & Hild, F. (2009). Digital image correlation and fracture: an advanced technique for estimating stress intensity factors of 2D and 3D cracks. Journal of Physics D: Applied Physics, 42, 214004. doi:10.1088/0022-3727/42/21/214004
   Web of Science ®Google Scholar
• Sutton, M., Wolters, W., Peters, W., Ranson, W., & McNeill, S. (1983). Determination of displacements using an improved digital correlation method. Image and Vision Computing, 1, 133–139. doi:10.1016/0262-8856(83)90064-1
   Google Scholar
• Teng, J., Smith, S., Yao, J., & Chen, J. (2003). Intermediate crack-induced debonding in RC beams and slabs. Construction and Building Materials, 17, 447–462.10.1016/S0950-0618(03)00043-6
   Web of Science ®Google Scholar
• Tran, Q. D., Chabot, A., Ehrlacher, A., & Tamagny, P., (2004). A simplified modelling for cracking in pavements. Proceedings of the Fifth International RILEM Conference Cracking in Pavements, Rilem Proceedings PRO 37, 5–8 May (299–306) Limoges, France. Print ISBN 2-912143-47-0.
   Google Scholar
• Tschegg, E. K., Macht, J., Jamek, M., & Stegenberger, J. (2007). Mechanical and fracture-mechanical properties of asphalt-concrete interfaces. ACI Materials, 104, 474–480. doi:10.1016/0262-8856(83)90064-1
   Web of Science ®Google Scholar
• Vulcano-Greullet, N., Kerzreho, J. P., Mauduit, V., & Chabot, A. (2010). Stripping phenomenon of top layers of thick pavements. Proceedings of the 11th International Conference on Asphalt Pavements, 1–6 August. (Vol. 1, 552–561). Nagoya Aichi, Japan: Curran Associates. Print ISBN: 978-1-61839-073-8.
   Google Scholar