On correlating the modulus of elasticity of stack-bonded flyash brick masonry using impact hammer and compression tests

References

• Atkinson, R. H., & Noland, J. L. (1983) A proposed failure theory for brick masonry in compression. In Proceedings 3rd Canadian Masonry Symposium Edmonton (pp. 5.1–5.17). Edmonton.
   Google Scholar
• Atkinson, R. H., & Yan,G. G. (1990). Results of statistical study of masonry deformability. The Masonry Society Journal, 9(1), 81–94. Retrieved from https://masonrysociety.org/product/tms-ejournal-vol-9-no-1/
   Google Scholar
• Balasubramanian, S. R., Maheswari, D., Cynthia, A., Rao, K. B., Meher- Prasad, A., Goswami, R., & Sivakumar, P. (2015). Experimental determination of statistical parameters associated with uniaxial compression behavior of brick masonry. Current Science, 109(11), 2094–2102. Retrieved from http://www.currentscience.ac.in/Volumes/109/11/2094.pdf
   Web of Science ®Google Scholar
• Bennett, R. M., Boyd, K. A., & Flanagan, R. D. (1997). Compressive properties of structural clay tile prisms. Journal of Structural Engineering (ASCE), 123(7), 920–926. doi:10.1061/(ASCE)0733-9445(1997)123:7(920)#sthash.0EJQtpUz.dpuf
   Web of Science ®Google Scholar
• Brozovsky, J. (2012). Implementation of non-destructive impact hammer testing methods in determination of brick strength. Applied Mechanics and Materials, 174–177, 280–285. doi:10.4028/www.scientific.net/AMM.174-177.280
   Google Scholar
• BS 5628-Part-1. (2005). Code of practice for structural use of masonry, part-I. Structural use of unreinforced masonry. London: British Standard Institution.
   Google Scholar
• Budiwati, I. A. M. (2009). Experimental compressive strength and modulus of elasticity of masonry. Jurnal Ilmiah Teknik Sipil, 13(1), 71–81. Retrieved from http://ojs.unud.ac.id/index.php/jits/article/download/3506/2538
   Google Scholar
• CEN. (1996). Design of masonry structures (Eurocode6) Part 1-1: General rules for buildings – Reinforced and unreinforced masonry (ENV 1996-1-1). Brussels.
   Google Scholar
• Chourasia, A., Parashar, J., Bhattachryya, S. K., & Singh, S. K. (2012) Non-destructive tests for masonry structures. In ISET Golden Jubliee Symposium, Indian Society of Earthquake Technology, Department of Earthquake Engineering Building (pp. 1–11). Roorkee: IIT Roorkee.
   Google Scholar
• Colville, J., Miltenberger, M. A., & Wolde-Tinsae, A. M. (1993). Hollow concrete masonry modulus of elasticity. In The sixth North American Masonry Conference (pp. 1195–1208). Philadelphia, PA: Pennsylvania. Retrieved from http://trove.nla.gov.au/version/12791903
   Google Scholar
• CSA-S304. (2014). Design of masonry structures. Mississauga: Canadian Standard Association.
   Google Scholar
• Dayaratnam, P. (1987). Brick and reinforced brick structures. New Delhi: Oxford and IBH.
   Google Scholar
• Deodhar, S. V. (2000). Strength of brick masonry prisms in compression. Journal of the Institution of Engineers, 81(3), 133–137.
   Google Scholar
• Deodhar, S. V., & Patel, A. N. (1996). Behavior of brick masonry in compression. Journal of Structural Engineering, 22(4), 221–224.
   Google Scholar
• Dhanasekar, M., Kleeman, P. W., & Page, A. W. (1985). Biaxial stress–strain relations for brick masonry. Journal of Structural Engineering (ASCE), 111(5), 1085–1100. doi:10.1061/(ASCE)0733-9445(1985)111:5(1085)#sthash.9WwKsV81.dpuf
   Web of Science ®Google Scholar
• Drysdale, R. G., Hamid, A. A., & Baker, L. R. (1994). Masonry structures: Behaviour and design. Englewood Cliffs, NJ: Prentice-Hall.
   Google Scholar
• Ewing, B. D., & Kowalsky, M. J. (2004). Compressive behavior of unconfined and confined clay brick masonry. Journal of Structural Engineering (ASCE), 130(4), 650–661. doi:10.1061/(ASCE)0733-9445(2004)130:4(650)#sthash.900hM47e.dpuf
   Web of Science ®Google Scholar
• Faella, G., Manfredi, G., & Realfonzo, R. (1993). Stress–strain relationships for tuff masonry: experimental results and analytical formulations. Masonry International Journal Papers, 7(2), 55–61. Retrieved from https://www.masonry.org.uk/downloads/stress–strain-relationships-for-tuff-masonry-experimental-results-and-analytical-formulations/
   Google Scholar
• FEMA-306. (1998). Evaluation of earthquake damaged concrete and masonry wall buildings, basic procedures manual. Redwood City, CA: Applied Technology Council.
   Google Scholar
• Fortes, E. S., Santos, M. J. A., Canato, R. L., & Parsekian, G. A. (2013). Prisms strength built with thin joint polymeric mortar compared to regular mortar joint. Proceedings of 12th Canadian Masonry Symposium, Vancouver.
   Google Scholar
• Freeda-Christy, C., Tensing, D., & Mercy Shanthi, R. (2013). Experimental study on axial compressive strength and elastic modulus of the clay and fly ash brick masonry. Journal of Civil Engineering and Construction Technology, 4(4), 134–141. doi:10.5897/JCECT12.089
   Google Scholar
• Gumaste, K. S., Rao, K. S. N., Reddy, B. V. V., & Jagdish, K. S. (2007). Strength and elasticity of brick masonry prisms and Wallettes under compression. Materials and Structures, 40(241), 241–253. doi:10.1617/s11527-006-9141-9
   Google Scholar
• Haach, V. G., Vasconcelos,G., & Lourenco, P. B. (2014). Assessment of compressive behaviour of concrete masonry prisms partially filled by general mortar. Journal of Materials in Civil Engineering ASCE, 26(1–12), 04014068. doi:10.1061/(ASCE)MT.1943-5533.0000956#sthash.AJ64OEu1.dpuf
   Web of Science ®Google Scholar
• Hamid, A. (1997). Material model for concrete and clay masonry: A comparative study. TMS Journal, 15(1), 21–26. Retrieved from https://masonrysociety.org/product/tms-ejournal-vol-15-no-1/
   Google Scholar
• Hamid, A., Ziab, G., & Nawawy, O. E. (1987). Modulus of elasticity of concrete block masonry. In 4th North American Masonry Conference (pp. 7.2–7.13). Retrieved from http://trove.nla.gov.au/work/13152103
   Google Scholar
• Hendrickx, R., Schueremans, L., Verstrynge, E., Balen, K. V., & Gemert, D. V. (2008). Effect of mortar type and workmanship on the behavior of masonry under uniaxial compression. 14th International Brick & Block Masonry Conference. Retrieved from http://trove.nla.gov.au/work/35411249?selectedversion=NBD44110002
   Google Scholar
• Hendry, A. W. (1981). Structural brickwork.  University of Michigan: Wiley.
   Google Scholar
• IS 1077. (1992). Common burn clay building brick specimen. New Delhi: Bureau of Indian Standard.
   Google Scholar
• IS 1905. (1987). Indian standard code of practice for structural use of unreinforced masonry. (3rd revision). New Delhi: Bureau of Indian Standard.
   Google Scholar
• IS 2250. (1981). Indian standard code of practice for preparation and use of masonry mortars. (5th revision). New Delhi: Bureau of Indian Standard.
   Google Scholar
• IS 3495-Part-1. (1992). Indian standard methods of test of burnt clay building bricks: Part 1: determination of compressive strength. New Delhi: Bureau of Indian Standard.
   Google Scholar
• Izquierdo O. S., Corrêa, M. R. S., & Soto,I. I. (2012). The influence of mortar bedding on the compressive strength of concrete block masonry structures. Proceedings of the IB2MaC, 15th International Brick and Block Masonry Conference, Florianopolis. ISBN: 9788563273109
   Google Scholar
• Jain, S. K., Brzev, S., Basu, D., Rai, D. C., & Mitra, K. (2016). Confined masonry construction for improved seismic safety of buildings in India. In International Seminar on Emerging Building Materials and Construction Technologies (pp. 225–235). New Delhi: India Habitat Centre.
   Google Scholar
• Kaushik, H. B., Rai, D. C., & Jain, S. K. (2007). Stress–strain characteristics of clay brick masonry under uniaxial compression. Journal of Materials in Civil Engineering ASCE, 19(9), 728–739. doi:10.1061/(ASCE)0899-1561(2007)19:9(728)#sthash.XojHyvMb.dpuf
   Web of Science ®Google Scholar
• Kent, D. C., & Park, R. (1971). Flexural members with confined concrete. Journal of the Structural Division, ASCE, 97(7), 1969–1990.
   Google Scholar
• Khalaf, F. M., Hendry, A. W., & Fairbairn, D. R. (1994). Study of the compressive strength of blockwork masonry, ACI Structural Journal, 91, 367–375. doi:10.14359/4139
   Web of Science ®Google Scholar
• Matthana, M. H. S. (1996). Strength of brick masonry and masonry walls with openings ( PhD). Indian Institute of Science, Bangalore.
   Google Scholar
• McNary, W. S., & Abrams, D. P. (1985). Mechanics of masonry in compression. Journal of Structural Engineering (ASCE), 111(4), 857–870. doi:10.1061/(ASCE)0733-9445(1985)111:4(857)#sthash.KSBMaFTS.dpuf
   Web of Science ®Google Scholar
• Miccoli, L., Müller, U., & Fontana, P. (2014). Mechanical behaviour of earthen materials: a comparison between earth block masonry, rammed earth and cob. Construction and Building Materials, 61, 327–339. doi:10.1061/(ASCE)0733-9445(1985)111:4(857)#sthash.KSBMaFTS.dpuf
   Web of Science ®Google Scholar
• Mojsilovic, N. (2005). A Discussion of masonry characteristics derived from compression tests. 10th Canadian Masonry Symposium, Banff. Retrieved from http://canadamasonrydesigncentre.com/download/10th_symposium/2b-5.pdf
   Google Scholar
• MSJC. (2002). Building code requirements for masonry structures (ACI 530-02/ASCE 5-02/TMS402-02). Detroit: The Masonry Society, American Concrete Institute, Structural Engineering Institute of the American Society of Civil Engineers.
   Google Scholar
• Naraine, K., & Sinha, S. (1989). Behavior of brick masonry under cyclic compressive loading. Journal of Structural Engineering (ASCE), 115(6), 1432–1445. doi:10.1061/(ASCE)0733-9445(1989)115:6(1432)#sthash.NckuWYiz.dpuf
   Web of Science ®Google Scholar
• Oliveira, D. V., Lourenço, P. B., & Roca, P. (2000) Experimental characterization of the behaviour of brick masonry subjected to cyclic loading. In Proceedings of the 12th International Brick and Block Masonry Conference (pp. 2119–2129). Madrid.
   Google Scholar
• Ozhan, H. B., & Cagatay, I. H. (2014). Mechanical behaviour of brick masonry panels under uniaxial compression. Journal of Mechanics of Materials and Structures, 9(4), 385–395. doi:10.2140/jomms.2014.9.385
   Web of Science ®Google Scholar
• Paulay, T., & Pristley, M. J. N. (1992). Seismic design of reinforced concrete and masonry buildings. New York: John Wiley & Sons Inc.
   Google Scholar
• Priestley, M. J. N., & Elder, D. M. (1983). Stress–strain curves for unconfined and confined concrete masonry. American Concrete Institute, 80(3), 192–201. doi:10.14359/10834
   Google Scholar
• Ramamurthy, K., Sathish, V., & Ambalavanan, R. (2000). Compressive strength predictions of hollow concrete block masonry prisms. ACI Structural Journal, 97(1), 61–67. doi:10.14359/834
   Web of Science ®Google Scholar
• Reddy, B. V. V., Lal, R., & Rao, K. S. N. (2009). Influence of joint thickness and mortar-block elastic properties on the strength and stresses developed in soil–cement block masonry. Journal of Materials in Civil Engineering, 21(2), 535–542. doi:10.1061/(ASCE)0899-1561(2009)21:10(535)#sthash.MkAGc5rt.dpuf
   Google Scholar
• Sarangapani, G., Reddy, B. V. V., & Jagadish, K. S. (2002). Structural characteristics of bricks, mortar and masonry. Journal of Structural Engineering, 29(2), 101–107. Retrieved from http://dspace.cusat.ac.in/jspui/bitstream/123456789/310/1/Structural%20Chracteristics%20of%20Bricks%20Mortars%20and%20Masonry.pdf
   Google Scholar
• Sarangapani, G., Reddy, B. V. V., & Jagadish, K. S. (2005). Brick-mortar bond and masonry compressive strength. Journal of Materials in Civil Engineering, ASCE, 17(2), 229–237. doi:10.1061/(ASCE)0899-1561(2005)17:2(229)#sthash.DjwEtdBX.dpuf
   Web of Science ®Google Scholar
• Sawko, F., & Rouf, M. A. (1984). On the stiffness properties of masonry. Proceedings Institute of Civil Engineering, Part 2, 77, 1–12. doi:10.1680/iicep.1984.1267
   Google Scholar
• Sinha, B. P., & Vekey, R. C. D. (1988). A study of the compressive strength in three orthogonal directions of brickwork prisms built with perforated bricks. Masonry International Journal Papers, 3(3), 105–110. Retrieved from https://www.masonry.org.uk/downloads/a-study-of-the-compressive-strength-in-three-orthogonal-directions-of-brickwork-prisms-built-with-perforated-bricks/
   Google Scholar
• Smith, A., Verhelst, F., Denayer, C., & Givens, R. (2014). Quantifying the benefits of lime additions in cement based mortars. Proceedings of the IMC 2014, 9th International Masonry Conference, Guimarães.
   Google Scholar
• Zahra, T., & Dhanasekar, M. (2016). Prediction of masonry compressive behaviour using a damage mechanics inspired modelling method. Construction and Building Materials, 109, 128–138. doi:10.1016/j.conbuildmat.2016.01.048
   Web of Science ®Google Scholar