An anisotropic unified nonlinear strength criterion (AUNS) for geomaterials

References

• Abelev, A.V., & Lade, P. V. (2003). Effects of cross-anisotropy on three-dimensional behavior of sand. I: Stress-strain behavior and shear banding. Journal of Engineering Mechanics ASCE, 129, 160–166.
   Web of Science ®Google Scholar
• Abelev, A., & Lade, P. V. (2004). Characterization of failure in crossanisotropic soils. Journal of Engineering Mechanics, 130, 599–606.
   Web of Science ®Google Scholar
• Attewell, P. B., & Sandford, M. R., (1974). Intrinsic shear strength of a brittle, anisotropic rock-I: Experimental and mechanical interpretation. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstract, 11, 423–430.
   Web of Science ®Google Scholar
• Bardet, J., 1990. Lode dependences for isotropic pressure-sensitive elastoplastic materials. Journal of Applied Mechanics, Transactions ASME, 57, 498–506.
   Web of Science ®Google Scholar
• Brewer, R. (1964). Fabric and mineral analysis of soils. New York, NY: Wiley.
   Google Scholar
• Callisto, L., & Calabresi, G. (1998). Mechanical behaviour of a natural soft clay. Geotechnique, 48, 495–513.
   Web of Science ®Google Scholar
• Callisto, L., & Rampello, S. (2002). Shear strength and small-strain stiffness of a natural clay under general stress conditions. Geotechnique, 52, 547–560.
   Web of Science ®Google Scholar
• Dafalias, Y. F., Papadimitriou, A. G., & Li, X. S. (2004). Sand plasticity model accounting for inherent fabric anisotropy. Journal of Engineering Mechanics ASCE, 130, 1319–1333.
   Web of Science ®Google Scholar
• Duveau, G., Shao, J. F., & Henry, J. P. (1998). Assesment of some failure criteria for strongly anisotropic geomaterials. Mechanics of Cohesive–Frictional Materials, 3, 1–26.
   Web of Science ®Google Scholar
• Gao, Z. W., Zhao, J. D., & Yao, Y. P. (2010). A generalized anisotropic failure criterion for geomaterials. International Journal of Solids and Structures, 47, 3166–3185.
   Web of Science ®Google Scholar
• Gao, Z. W., & Zhao, J. D. (2012). Efficient approach to characterize strength anisotropy in soils. Journal of Engineering Mechanics, 138, 1447–1456.
   Web of Science ®Google Scholar
• Gu X. Q., Li W. Y., Qian J. G., & Xu K. (2017). Discrete element modelling of the influence of inherent anisotropy on the shear behaviour of granular soils. European Journal of Environmental & Civil Engineering, 22, 1–18.
   Web of Science ®Google Scholar
• Haruyama, M. (1981). Anisotropic deformation-strength properties of an assembly of spherical particles under three dimensional stresses. Soil Foundation, 21, 41–55.
   Google Scholar
• Hight, D. W., Gens, A., & Symes, M. J. (1983). The development of a new hollow cylinder apparatus for investigating the effects of principal rotation in soils. Geotechnique, 33, 355–383.
   Web of Science ®Google Scholar
• Hoek, E., & Brown, E. (1980). Empirical strength criterion for rock masses. Journal of Geotechnical Engineering Division, 106, 1013–1035.
   Google Scholar
• Kirkgard, M. M., & Lade, P. V. (1993). Anisotropic three-dimensional behavior of a normally consolidated clay. Canadian Geotechnical Journal, 30, 848–858.
   Web of Science ®Google Scholar
• Kong Y. X., Zhao J. D., & Yao Y. P. (2012). A failure criterion for cross-anisotropic soils considering microstructure. Acta Geotechnica, 8, 665–673.
   Web of Science ®Google Scholar
• Lade, P. V., & Duncan, J. M. (1975). Elastoplastic stess–strain theory for cohesionless soil. Journal of Geotechnical Engineering Division, 101, 1037–1053.
   Google Scholar
• Lade, P. V. (1977). Elasto-plastic stress-strain theory for cohesionless soil with curved yield surface. International Journal of Solids and Structures, 13, 1019–1035.
   Web of Science ®Google Scholar
• Lade, P. V., & Kirkgard, M. M. (2000). Effects of stress rotation and changes of b-values on cross-anisotropic behavior of natural, K0-consolidated soft clay. Soils and Foundations, 40, 93–105.
   Google Scholar
• Lade, P. V., & Abelev, A. (2005). Characterization of cross-anisotropic soil deposits from isotropic compression tests. Soils and Foundations, 45, 89–102.
   Web of Science ®Google Scholar
• Lade, P. V. (2007). Modeling failure in cross-anisotropic frictional materials. International Journal of Solids and Structures, 44, 5146–5162.
   Web of Science ®Google Scholar
• Lade, P. V. (2008). Failure criterion for cross-anisotropic soils. Journal of Geotechnical and Geoenvironmental Engineering ASCE, 134, 117–124.
   Web of Science ®Google Scholar
• Lade P. V. (2006) Assessment of test data for selection of 3-D failure criterion for sand. International Journal for Numerical and Analytical Methods in Geomechanics, 30, 307–333.
   Web of Science ®Google Scholar
• Liu, M. D., & Carter, J. P. (2003). General strength criterion for geomaterials. International Journal of Geomechanics, 3, 253–259.
   Google Scholar
• Lu D. C., Ma C., Du X. L., & Liu J. (2016). Development of a new nonlinear unified strength theory for geomaterials based on the characteristic stress concept. International Journal of Geomechanics, 17, 04016058.
   Web of Science ®Google Scholar
• Matsuoka, H., & Nakai, T. (1974). Stress-deformation and strength characteristics of soil under three different principal stresses. Proceedings of the Japan Society of Civil Engineers, 232, 59–70.
   Google Scholar
• Matsuoka, H. (1976). On the significance of the spatial mobilized plane. Soils and Foundations, 16, 91–100.
   Google Scholar
• Mitchell, J. K., & Soga, K. (2005). Fundamentals of soil behavior, 3rd ed. Hoboken, NJ: John Wiley & Sons, Inc.
   Google Scholar
• Mortara, G. (2008). A new yield and failure criterion for geomaterials. Géotechnique, 58, 125–132.
   Web of Science ®Google Scholar
• Mortara, G. (2010). A yield criterion for isotropic and cross-anisotropic cohesive-frictional materials. International Journal for Numerical and Analytical Methods in Geomechanics, 34, 953e977.
   Web of Science ®Google Scholar
• Niandou, H., Shao, J. F., Henry, J. P., & Fourmaintraux, D. (1997). Laboratory investigation of the behaviour of Tournemire shale. International Journal of Rock Mechanics and Mining Sciences, 34 (1), 3–16.
   Web of Science ®Google Scholar
• Nicot F., Daouadjib A., Haddaa N., Jradb M., & Darve F. (2013). Granular media failure along triaxial proportional strain paths. European Journal of Environmental and Civil Engineering, 17, 777–790.
   Web of Science ®Google Scholar
• Ochiai, H., & Lade, P. V. (1983). Three-dimensional behavior of sand with anisotropic fabric. Journal of Geotechnical Engineering, 109, 1313–1328.
   Google Scholar
• Oda, M., & Nakayama, H., (1989). Yield function for soil with anisotropic fabric. Journal of Engineering Mechanics ASCE, 115, 89–104.
   Web of Science ®Google Scholar
• Oda, M., (1999). Fabric tensor and its geometrical meaning. In: Oda, M., Iwashita, K. (Eds.), Inroduction to Mechanics of Granular Materials. Notterdam: Balkema, pp. 27–35.
   Google Scholar
• Pietruszczak, S., & Mroz, Z., (2000). Formulation of anisotropic failure criteria incorporating a microstructure tensor. Computers and Geotechnics, 26, 105–112.
   Web of Science ®Google Scholar
• Pietruszczak, S., & Mroz, Z., (2001). On failure criteria for anisotropic cohesive-frictional materials. International Journal for Numerical and Analytical Methods in Geomechnics, 25, 509–524.
   Google Scholar
• Qian J. G, You Z. P, Huang M. S, & Gu X. Q. (2013) A micromechanics-based model for estimating localized failure with effects of fabric anisotropy, Computers and Geotechnics, 50, 90–100.
   Web of Science ®Google Scholar
• Qian J. G, Yang J, & Huang M. S. (2008) Three-dimensional non-coaxial plasticity modelling of shear band formation in geomaterials. Journal of Geotechnical Engineering, ASCE, 134, 322–329.
   Google Scholar
• Rodriguez, N. M., & Lade, P. V. (2013). Effects of principal stress directions and mean normal stress on failure criterion for cross-anisotropic sand. Journal of Engineering Mechanics, 139, 1592–1601.
   Web of Science ®Google Scholar
• Schweiger, H. F., Wiltafsky, C., Scharinger, F., & Galavi, V. (2009). A multilaminate framework for modelling induced and inherent anisotropy of soils. Géotechnique, 59, 87–101.
   Web of Science ®Google Scholar
• Su, X., Nguyen, S., Haghighat, E., Pietruszczak, S., & Labrie, D. (2017). Characterizing the mechanical behaviour of the Tournemire argillite. The Geological Society of London, 443, 97–113.
   Google Scholar
• Whittle, A. J., Degroot, D. J., Ladd, C. C., & Seah, T.-H. (1994). Model prediction of anisotropic behavior of Boston blue clay. Journal of Geotechnical Engineering, 120, 199–224.
   Google Scholar
• Xiao Y, Liu H. L, & Liang Robert Y. (2011). Modified cam-clay model incorporating unified nonlinear strength criterion. Science China Series E: Technological Sciences, 54, 805–810.
   Google Scholar
• Xiong H, Guo L, Cai Y. Q, & Yang Z. X. (2016). Experimental study of drained anisotropy of granular soils involving rotation of principal stress direction. European Journal of Environmental and Civil Engineering, 20, 431–454.
   Web of Science ®Google Scholar
• Yoshimine, M., Ishihara, K., & Vargas, W. (1998). Effects of principal stress direction and intermediate principal stress on undrained shear behavior of sand. Soils and Foundations, 38, 179–188.
   Google Scholar
• Yu, M. H. (2002). Advances in strength theories for materials under complex stress state in the 20th Century. Applied Mechanics Reviews, 55, 169–218.
   Google Scholar
• Yao, Y. P., Lu, D. C., Zhou, A. N., & Zou, B. (2004). Generalized nonlinear strength theory and transformed stress space. Science China Series E: Technological Sciences, 47, 691–709.
   Google Scholar
• Zhu, H. X, Veylon, G., Nicot, F., & Darve, F. (2017) On the mechanics of meso-scale structures in two-dimensional granular materials. European Journal of Environmental and Civil Engineering, 21, 912–935.
   Web of Science ®Google Scholar
• Zhu, H., Nicot, F., & Darve, F. (2016). Meso-structure organization in two-dimensional granular materials along biaxial loading path. International Journal of Solids and Structures, 96, 25–37.
   Web of Science ®Google Scholar