References
- ABAQUS standard 6.13. (2013). ABAQUS/theory user manual. Providence, RI, USA: Dassault Systemes.
- ACI Committee. (2014). Building Code Requirements for Structural Concrete (ACI 318-14) and Commentary. Farmington Hills, MI: ACI Committee.
- ACI Committee. (2017). Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures (ACI 440.2R-17). Farmington Hills, MI: ACI Committee.
- Achintha, M., & Burgoyne, C. (2013). Fracture energy of the concrete-FRP interface in strengthened beams. Engineering Fracture Mechanics, 110, 38–51. doi:https://doi.org/10.1016/j.engfracmech.2013.07.016
- Belarbi, A., & Acun, B. (2013). FRP Systems in Shear Strengthening of Reinforced Concrete Structures. Procedia Engineering, 57, 2–8. doi:https://doi.org/10.1016/j.proeng.2013.04.004
- Chen, G. M., Chen, J. F., & Teng, J. G. (2012). On the finite element modelling of RC beams shear-strengthened with FRP. Construction and Building Materials, 32, 13–26. doi:https://doi.org/10.1016/j.conbuildmat.2010.11.101
- Chen, J. F., & Teng, J. G. (2003). Shear capacity of fiber-reinforced polymer-strengthened reinforced concrete beams: Fiber reinforced polymer rupture. Journal of Structural Engineering, 129, 615–625. doi:https://doi.org/10.1061/(ASCE)0733-9445(2003)129:5(615)
- De Lorenzis, L., & Nanni, A. (2001). Shear strengthening of reinforced concrete beams with near surface mounted fiber reinforced polymer rods. ACI Structural Journal, 98, 60–68.
- De Lorenzis, L., & Teng, J. G. (2007). Near-surface mounted FRP reinforcement: An emerging technique for strengthening structures. Composite Part B: Engineering, 38, 119–143. doi:https://doi.org/10.1016/j.compositesb.2006.08.003
- Dias, S. J. E., & Barros, J. A. O. (2013). Shear strengthening of RC beams with NSM CFRP laminates: Experimental research and analytical formulation. Composite Structures, 99, 477–490. doi:https://doi.org/10.1016/j.compstruct.2012.09.026
- fib Bulletin 14. (2001). Externally bonded FRP reinforcement for RC structures, technical report on the design and use of FRP EBR for reinforced concrete structures. Lausanne: International Federation for Structural Concrete.
- Godat, A., Labossiere, P., & Neale, K. W. (2012). Numerical investigation of the parameters influencing the behavior of FRP shear-strengthened beams. Construction and Building Materials, 32, 90–98. doi:https://doi.org/10.1016/j.conbuildmat.2010.11.110
- Hordijk, D. A. (1991). Local approach to fatigue of concrete. The Netherlands: Delft University of Technology (Doctoral dissertation).
- Kent, D. C., & Park, R. (1971). Flexural members with confined concrete. Journal of the Structural Division, 97, 1969–1990.
- Khaldoun, N. R., & Hatem, A. R. (2011). Tests on reinforced concrete beams strengthened in shear using near surface mounted CFRP and steel bars. Engineering Structures, 33, 53–62.
- Khalifa, A., Gold, W. J., Nanni, A., & Aziz, A. (1998). Contribution of externally bonded FRP to shear capacity of RC flexural members. Journal of Composites for Construction, 2, 195–202. doi:https://doi.org/10.1061/(ASCE)1090-0268(1998)2:4(195)
- Lu, X. Z., Teng, J. G., Ye, L. P., & Jiang, J. J. (2005). Bond-slip models for FRP sheets/plates bonded to concrete. Engineering Structures, 27, 920–937. doi:https://doi.org/10.1016/j.engstruct.2005.01.014
- Lubliner, J., Oliver, J., Oller, S., & Onate, E. (1989). Plastic-damage model for concrete. International Journal of Solids Structures, 25, 299–326. doi:https://doi.org/10.1016/0020-7683(89)90050-4
- Manos, G. C., Theofanous, M., & Katakalos, K. (2014). Numerical simulation of the shear behavior of reinforced concrete rectangular beam specimens with or without FRP-strip shear reinforcement. Advances in Engineering Software, 67, 47–56. doi:https://doi.org/10.1016/j.advengsoft.2013.08.001
- Mofidi, A., & Chaallal, O. (2014). Effect of steel stirrups on shear resistance gain due to externally bonded fiberSheets. ACI Structural Journal, 111, 353–362.
- Mostofinejad, D., Esfahani, M. R., & Shomali, A. (2019). Experimental and numerical study of the RC beams Shear-strengthened with NSM technique. Journal of Composite Materials, 53(17), 1–13.
- Mostofinejad, D., Hosseini, S. A., & Razavi, S. B. (2016). Influence of different bonding and wrapping techniques on performance of beams strengthened in shear using CFRP reinforcement. Construction and Building Materials, 116, 310–320. doi:https://doi.org/10.1016/j.conbuildmat.2016.04.113
- Mostofinejad, D., & Moshiri, N. (2014). Compressive strength of CFRP composites used for strengthening of RC columns: Comparative evaluation of EBR and grooving methods. Journal of Composites for Construction, 19, 04214079.
- Mostofinejad, D., & Shameli, S. M. (2013). Externally bonded reinforcement in grooves (EBRIG) technique to postpone debonding of FRP sheets in strengthened concrete beams. Construction and Building Materials, 37, 751–758. doi:https://doi.org/10.1016/j.conbuildmat.2012.09.030
- Mostofinejad, D., Shameli, S. M., & Hosseini, A. (2014). EBROG and EBRIG methods for strengthening of RC beams by FRP sheets. European Journal of Environmental and Civil Engineering, 18, 652–668. doi:https://doi.org/10.1080/19648189.2014.900523
- Mostofinejad, D., & Tabatabaei Kashani, A. (2013). Experimental study on effect of EBR and EBROG methods on de-bonding of FRP sheets used for shear strengthening of RC beams. Composite Part B: Engineering, 45, 1704–1713. doi:https://doi.org/10.1016/j.compositesb.2012.09.081
- Nanni, A., Di Ludovico, M., & Parretti, R. (2004). Shear strengthening of a PC bridge girder with NSM CFRP rectangular bars. Advances in Structural Engineering, 7, 97–109.
- Obaidat, Y. T., Heyden, S., & Dahlblom, O. (2010). The effect of CFRP and CFRP/concrete interface models when modeling retrofitted RC beams with FEM. Composite Structures, 92, 1931–1938.
- Piggott, M. (2002). Load bearing fiber composites. Boston/Dordrecht/London: Kluwer Academic Publishers.
- Rita, S. Y., Wong, F., & Vecchio, J. (2003). Towards modeling of reinforced concrete members with externally bonded fiber-reinforced polymer composites. ACI Structural Journal, 100, 47–55.
- Saenz, L. P. (1964). Discussion of equation for the stress-strain curve of concrete-by Desayi, P. and Krishan, S. ACI Structural Journal, 61, 1229–1235.
- Sayed, A. M., Wang, X., & Wu, Z. (2014). Finite element modelling of shear capacity of RC beams strengthened with FRP sheets by considering different failure modes. Construction and Building Materials, 59, 169–179. doi:https://doi.org/10.1016/j.conbuildmat.2014.02.044
- Shomali, A., Mostofinejad, D., & Esfahani, M. R. (2019). Experimental study on effect of EBRIG shear strengthening method on the behavior of RC beams. Advances in Concrete Construction, an International Journal, 0, 27–41.
- Shukri, A. A., Darain, K. M., & Jumaat, M. Z. (2015). The tension-stiffening contribution of NSM CFRP to the behavior of strengthened RC beams. Materials, 8, 4131–4146. doi:https://doi.org/10.3390/ma8074131
- Teng, J. G., & Chen, J. F. (2003). Shear capacity of FRP-strengthened RC beam: FRP de-bonding. Construction and Building Materials, 17, 27–41. doi:https://doi.org/10.1016/S0950-0618(02)00091-0
- Teng, J. G., Chen, J. F., Smith, S. T., & Lam, L. (2002). FRP strengthened RC structures. England: Wiley.
- Triantafillou, T. C. (1998). Shear strengthening of reinforced concrete beams using epoxy-bonded FRP composites. ACI Structural Journal, 95, 107–115.
- Zhang, S. S., Teng, J. G., & Yu, T. (2013). Bond-slip model for CFRP strips near-surface mounted to concrete. Engineering Structures, 56, 945–953. doi:https://doi.org/10.1016/j.engstruct.2013.05.032