References
- Al-Rousan, T., Masad, E., Tutumluer, E., & Pan, T. (2007). Evaluation of image analysis techniques for quantifying aggregate shape characteristics. Construction and Building Materials, 21(5), 978–990. doi:https://doi.org/10.1016/j.conbuildmat.2006.03.005
- Anochie-Boateng, J. K., Komba, J., & Tutumluer, E. (2012). Aggregate surface areas quantified through laser measurements for South African asphalt mixtures. Journal of Transportation Engineering, 138(8), 1006–1015. doi:https://doi.org/10.1061/(ASCE)TE.1943-5436.0000416
- Arasan, S., Hasiloglu, A. S., & Akbulut, S. (2010). Shape properties of natural and crushed aggregate using image analysis. International Journal of Civil and Structural Engineering, 1(2), 221–233.
- ASTM C127. (2015). Standard test method for relative density (specific gravity) and absorption of coarse aggregate. In: Annual book of ASTM standards. West Conshohocken: ASTM International.
- ASTM C204. (2011). Standard test methods for fineness of hydraulic cement by air-permeability apparatus. In: Annual book of ASTM standards. West Conshohocken: ASTM International.
- ASTM C1252. (2017). Standard test methods for uncompacted void content of fine aggregate (as influenced by particle shape, surface texture, and grading. In: Annual book of ASTM standards. West Conshohocken: ASTM International.
- ASTM D2488. (2017). Standard practice for description and identification of soils (visual-manual procedure. In: Annual book of ASTM standards. West Conshohocken: ASTM International.
- ASTM D4791. (2010). Standard test method for flat and elongated particles in coarse aggregate. In: Annual book of ASTM standards. West Conshohocken: ASTM International.
- ASTM D5821. (2014). Standard test method for determining the percentage of fractured particles in coarse aggregate. In: Annual book of ASTM standards. West Conshohocken: ASTM International.
- Bangaru, R. S., & Das, A. (2012). Aggregate shape characterization in frequency domain. Construction and Building Materials, 34, 554–560. doi:https://doi.org/10.1016/j.conbuildmat.2012.02.063
- Barett, P. J. (1980). The shape of rock particles, a critical review. Sedimentology, 27(5), 291–303.
- Barksdale, R. D., Kemp, M. A., Sheffield, W. J., & Hubbard, J. L. (1991). Measurement of aggregate shape, surface area, and roughness. Transportation Research Record, 1301, 107–116.
- Barksdale, R. D. (1993). The aggregate handbook. Washington, DC: National stone association.
- Bergey, E. A., & Getty, G. M. (2006). A review of methods for measuring the surface area of stream substrates. Hydrobiologia, 556(1), 7–16. doi:https://doi.org/10.1007/s10750-005-1042-3
- Bhasin, A., & Dallas, L. (2007). Characterization of aggregate surface energy using the universal sorption device. Journal of Materials in Civil Engineering, 19(8), 634–641. doi:https://doi.org/10.1061/(ASCE)0899-1561(2007)19:8(634)
- Cetin, A., & Carrasquillo, R. L. (1998). High performance concrete. Influence of coarse aggregates on mechanical properties. ACI Materials Journal, 95(3), 252–261.
- Clayton, C. R. I., Abbireddy, C. O. R., & Schiebel, R. (2009). A method of estimating the form of coarse particulates. Géotechnique, 59(6), 493–501. doi:https://doi.org/10.1680/geot.2007.00195
- Dilek, U. (2000). Effects of manufactured sand characteristics on properties concrete (PhD Thesis). North Carolina State University, North Carolina.
- Dilek, U., & Leming, M. (2004). Relationship between particle shape and void content of fine aggregate. Cement, Concrete, and Aggregates, 26(1), 1–7. doi:https://doi.org/10.1520/CCA11916
- Doeg, T., & Lake, P. S. (1981). A technique for assessing the composition and density of the macroinvertebrate fauna of large stones in streams. Hydrobiologia, 80(1), 3–6. doi:https://doi.org/10.1007/BF00130676
- Dudgeon, C. R. (1966). An experimental study of the flow of water through coarse granular media. La Houille Blanche, 7, 785–800. doi:https://doi.org/10.1051/lhb/1966049
- Erdoğan, S. T. (2016). Simple estimation of the surface area of irregular 3D particles. Journal of Materials in Civil Engineering, 28(8), 04016062. doi:https://doi.org/10.1061/(ASCE)MT.1943-5533.0001575
- Erdoğan, S. T., Quiroga, P. N., Fowler, D. W., Saleh, H. A., Livingston, R. A., Garboczi, E. J., … Satterfield, S. G. (2006). Three-dimensional shape analysis of coarse aggregates: New techniques for and preliminary results on several different coarse aggregates and reference rocks. Cement and Concrete Research, 36(9), 1619–1627. doi:https://doi.org/10.1016/j.cemconres.2006.04.003
- Garga, V. K., Townsend, R., & Hansen, D. (1991). A method for determining the surface area of quarried rocks. Geotechnical Testing Journal, 14(1), 35–45. doi:https://doi.org/10.1520/GTJ10189J
- Gietl, J. K., Lawrence, R., Thorpe, A. J., & Harrison, R. M. (2010). Identification of brake wear particles and derivation of a quantitative tracer for brake dust at a major road. Atmospheric Environment, 44(2), 141–146. doi:https://doi.org/10.1016/j.atmosenv.2009.10.016
- Hagen, M., & Cochran, G. (1996). Comparison of pavement drainage system. Transportation Research Record: Journal of the Transportation Research Board, 1519(1), 1–10. doi:https://doi.org/10.3141/1519-01
- Harrod, J. J., & Hall, R. E. (1962). A method for determining the surface areas of various aquatic plants. Hydrobiologia, 20(2), 173–178. doi:https://doi.org/10.1007/BF00046315
- Hedlin, C. P., & Collins, S. H. (1961). A method of measuring the surface area of granular material. The Canadian Journal of Chemical Engineering, 39(1), 49–51. doi:https://doi.org/10.1002/cjce.5450390111
- Hughes, S. W. (2005). Archimedes revisited: A faster, better, cheaper method of accurately measuring the volume of small objects. Physics Education, 40(5), 468–474. doi:https://doi.org/10.1088/0031-9120/40/5/008
- Hunter, A. E., Gordon, D. A., & Collop, A. C. (2004). Aggregate orientation and segregation in laboratory compacted asphalt samples. Transportation Research Record: Journal of the Transportation Research Board, 1891(1), 8–15. doi:https://doi.org/10.3141/1891-02
- IS: 2386, Part-I. (1999). Methods of test for aggregates for concrete (particle size and shape). New Delhi: Bureau of Indian Standards.
- Image J. (2017). Retrieved from https://imagej.nih.gov/ij/. (downloaded on 05 Jan 2017).
- Jamkar, S. S., & Rao, C. B. K. (2004). Index of aggregate particle shape and texture of coarse aggregate as a parameter for concrete mix proportioning. Cement and Concrete Research, 34(11), 2021–2027. doi:https://doi.org/10.1016/j.cemconres.2004.03.010
- Janoo, V. C. (1998). Quantification of shape, angularity, and surface texture of base course materials. CRREL Special Report No. 98-1. Hanover, NH: Cold Regions Research and Engineering Laboratory.
- Jayhyun, K., Sung-Hee, K., Tutumluer, E., & Mark, H. W. (2015). Characterisation of unbound aggregate materials considering physical and morphological properties. International Journal of Pavement Engineering, 18(4), 303–308. doi:https://doi.org/10.1080/10298436.2015.1065997
- Kazmierowski, T. J., Bradbury, A., & Hajek, J. (1994). Field evaluation of various types of open graded drainage layers. Transportation Research Record, 1434, 55–64.
- Kim, H., Carl, T. H., Alan, F. R., & Craig, B. (2002). Dimensional ratios for stone aggregates from three-dimensional laser scans. Journal of Computing in Civil Engineering, 16(3), 175–183. doi:https://doi.org/10.1061/(ASCE)0887-3801(2002)16:3(175)
- Kim, H., Haas, C. T., Rauch, A. F., & Browne, C. (2003). 3D image segmentation of aggregates from laser profiling. Computer-Aided Civil and Infrastructure Engineering, 18(4), 254–263. doi:https://doi.org/10.1111/1467-8667.00315
- Koorevaar, P., Menelik, G., & Dirksen, G. (1983). Elements of soil physics (Vol. 13). The Netherlands: Elsevier Science.
- Krumbein, W. C. (1941). Measurement and geological significance of shape and roundness of sedimentary particles. Journal of Sedimentary Petrology, 11(2), 64–72.
- Kuo, C. Y., & Freeman, R. (2000). Imaging indices for quantification of shape, angularity, and surface texture of aggregates. Transportation Research Record: Journal of the Transportation Research Board, 1721(1), 57–65. doi:https://doi.org/10.3141/1721-07
- Kuo, C. Y., Frost, J. D., Lai, J. S., & Wang, L. B. (1996). Three dimensional image analysis of aggregate particles from orthogonal projections. Transportation Research Record: Journal of the Transportation Research Board, 1526(1), 98–103. doi:https://doi.org/10.3141/1526-12
- Kuo, C. Y., Raymond, S. R., & Larry, N. L. (1998). Morphological study of coarse aggregate using image analysis. Journal of Materials in Civil Engineering, 10(3), 135–142. doi:https://doi.org/10.1061/(ASCE)0899-1561(1998)10:3(135)
- Kutay, M. E., Ozturk, H. I., Abbas, A. R., & Hu, C. (2011). Comparison of 2D and 3D image-based aggregate morphological indices. International Journal of Pavement Engineering, 12(4), 421–431. doi:https://doi.org/10.1080/10298436.2011.575137
- Lenarno, F., & Tolppanen, P. (2002). 3D Characterization of coarse aggregates. Engineering Geology, 65(1), 17–30. doi:https://doi.org/10.1016/S0013-7952(01)00133-8
- Liu, P., Hu, J., Wang, D., Oeser, M., Alber, S., Ressel, W., & Falla, G. C. (2017). Modelling and evaluation of aggregate morphology on asphalt compression behavior. Construction and Building Materials, 133, 196–208. doi:https://doi.org/10.1016/j.conbuildmat.2016.12.041
- Maitra, S. R., Reddy, K. S., & Ramachandra, L. S. (2010). Load transfer characteristics of aggregate interlocking in concrete pavement. Journal of Transportation Engineering, 136(3), 190–195. doi:https://doi.org/10.1061/(ASCE)TE.1943-5436.114
- Mallela, J., Larson, G., Wyatt, T., Hall, J., & Barker, W. (2002). User’s guide for drainage requirements in pavements. Federal Highway Administration Report, FHWA, DTFH61-00-F-00199.
- Masad, E., Al-Rousan, T., Button, J., Little, D. N., & Tutumular, E. (2007). Test methods for characterizing aggregate shape, texture, and angularity. Report 555. National Cooperative Highway Research Program. Washington, DC: Transportation Research Board.
- Masad, E., & Button, J. W. (2000). Unified imaging approach for measuring aggregate angularity and texture. Computer-Aided Civil and Infrastructure Engineering, 15(4), 273–280. doi:https://doi.org/10.1111/0885-9507.00191
- Masad, E., Olcott, D., White, T., & Tashman, L. (2001). Correlation of fine aggregate imaging shape indices with asphalt mixture performance. Transportation Research Record: Journal of the Transportation Research Board, 1757(1), 148–156. doi:https://doi.org/10.3141/1757-17
- Mora, C. F., & Kwan, A. K. H. (2000). Sphericity, shape factor, and convexity measurement of coarse aggregate for concrete using digital image processing. Cement and Concrete Research, 30(3), 351–358. doi:https://doi.org/10.1016/S0008-8846(99)00259-8
- Neville, A. M., & Brooks, J. J. (2006). Concrete technology, International Standard Edition. India: Pearson Education.
- Ozol, M. A. (1978). Chapter 35 – Shape, surface texture, surface area and coatings. In Test and properties of concrete aggregates. STP169B-EB. Edited by Best, C., ASTM International, West Conshohocken, (pp. 584–628).
- Pan, T., Tutumluer, E., & Anochie-Boateng, J. K. (2006). Aggregate morphology affecting resilient behavior of unbound granular materials. Transportation Research Record: Journal of the Transportation Research Board, 1952(1), 12–20. doi:https://doi.org/10.1177/0361198106195200102
- Prowell, B. D., Zhang, J., & Brown, E. R. (2005). Aggregate properties and the performance of Superpave designed hot mix asphalt. NCHRP 539. Washington, DC: Transportation Research Board.
- Rao, C., Tutumluer, E., & Kim, I. T. (2002). Quantification of coarse aggregate angularity based on image analysis. Transportation Research Record: Journal of the Transportation Research Board, 1789, 117–124. doi:https://doi.org/10.3141/1787-13
- Reddy, K. R. J. (2017). Characterization of shape of aggregates using surface area and volume, (Master’s thesis), Department of Civil Engineering, IIT Kanpur.
- Rocco, C. G., & Elices, M. (2009). Effect of aggregate shape on the mechanical properties of a simple concrete. Engineering Fracture Mechanics, 76(2), 286–298. doi:https://doi.org/10.1016/j.engfracmech.2008.10.010
- Sabliov, C. M., Boldor, D., Keener, K. M., & Farkas, B. E. (2002). Image processing method to determine surface area and volume of axi-symmetric agricultural products. International Journal of Food Properties, 5(3), 641–653. doi:https://doi.org/10.1081/JFP-120015498
- Shen, W., Dong, R., Li, J., Zhou, M., Ma, W., & Zha, J. (2010). Experimental investigation on aggregate interlocking concrete prepared with scattering filling coarse aggregate process. Construction and Building Materials, 24(11), 2312–2316. doi:https://doi.org/10.1016/j.conbuildmat.2010.04.023
- Shourbagy, S. A. M., & Matuttis, H. G. (2005). Angle of repose for two dimensional particle aggregates from particle size and shape. Powder and Grains, 2, 1289–1293.
- Smith, M. R., & Collis, L. (1993). Aggregates : Sand, gravel and crushed rock aggregates for construction purposes (2nd ed.). Vol. 17, Geological Society Engineering Geology, Geological Society of London, London.
- Taylor, M. A., Garboczi, E. J., Erdogan, S. T., & Fowler, D. W. (2006). Some properties of irregular 3-D particles. Powder Technology, 162(1), 1–15. doi:https://doi.org/10.1016/j.powtec.2005.10.013
- Vandenbossche, J. M. (1999). Estimating potential aggregate interlock load transfer based on measurements of volumetric surface texture of fracture plane. Transportation Research Record: Journal of the Transportation Research Board, 1673(1), 59–63. doi:https://doi.org/10.3141/1673-08
- Wadell, H. (1932). Volume, shape and roundness of rock particles. The Journal of Geology, 40(5), 443–451. doi:https://doi.org/10.1086/623964
- Wettimuny, R., & Penumadu, D. (2004). Application of Fourier analysis to digital imaging for particle shape analysis. Journal of Computing in Civil Engineering, 18(1), 2–9. doi:https://doi.org/10.1061/(ASCE)0887-3801(2004)18:1(2)
- Whalley, W. B. (1972). The description and measurement of sedimentary particles and the concept of form. Journal of Sedimentary Research, 42(4), 961–965.
- Wilson, J. D., & Klotz, L. (1996). Quantitative analysis of aggregate based on Hough transform. Transportation Research Record, 1530(1), 111–115. doi:https://doi.org/10.3141/1530-14