References
- Aly, M., Hashmi, M., Olabi, A., Messeiry, M., Hussain, A., & Abadir, E. (2011). Effect of nano-clay and waste glass powder on the properties of flax fibre reinforced mortar. ARPN Journal of Engineering and Applied Sciences, 6(10), 19–28.
- Aly, M., Hashmi, M. S. J., Olabi, A. G., Messeiry, M., & Hussain, A. I. (2011). Effect of nano clay particles on mechanical, thermal and physical behaviours of waste-glass cement mortars. Materials Science and Engineering: A, 528(27), 7991–7998. doi:https://doi.org/10.1016/j.msea.2011.07.058
- American Concrete Institute. (2003). Guide For structural lightweight aggregate concrete, ACI213R-03. ACI Manual of Concrete Practice, Part 1, p. 27.
- ASTM C33-03. (2003). Standard specification for concrete aggregates. West Conshohocken, PA: Author.
- ASTM C150. (2002). Standard specification for Portland cement: American Society for Testing and Materials. West Conshohocken, PA: Author.
- ASTM C494. (2010). Standard specification for chemical admixtures for concrete. Annual Book of American Society for Testing Materials Standards, Vol. 4.02, pp. 271–279.
- ASTM C666/C666M-15. (2015). Standard test method for resistance of concrete to rapid freezing and thawing. West Conshohocken, PA: Author.
- Ayub, T., Shafiq, N., Khan, S. U., & Nuruddin, M. (2013). Durability of concrete with different mineral admixtures: A review. International Journal of Civil, Architectural Science and Engineering, 7(8), 199–210.
- Bhanja, S., & Sengupta, B. (2003). Optimum silica fume content and its mode of action on concrete. ACI Materials Journal, 100(5), 407–412.
- BIBM, CEMBUREAU, EFCA, EFNARC, ERMCO. (2005). The European guidelines for self-compacting concrete: Specification, production and use. Retrieved from: www.efnarc.org
- Bleszynski, R., Hooton, R. D., Thomas, M. D., & Rogers, C. A. (2002). Durability of ternary blend concrete with silica fume and blast-furnace slag: Laboratory and outdoor exposure site studies. Materials Journal, 99(5), 499–508.
- Bogas, J. A., De Brito, J., & Ramos, D. (2016). Freeze–thaw resistance of concrete produced with fine recycled concrete aggregates. Journal of Cleaner Production, 115, 294–306. doi:https://doi.org/10.1016/j.jclepro.2015.12.065
- Chang, T.-P., Shih, J.-Y., Yang, K.-M., & Hsiao, T.-C. (2007). Material properties of Portland cement paste with nano-montmorillonite. Journal of Materials Science, 42(17), 7478–7487. doi:https://doi.org/10.1007/s10853-006-1462-0
- Chidiac, S., & Panesar, D. (2008). Evolution of mechanical properties of concrete containing ground granulated blast furnace slag and effects on the scaling resistance test at 28 days. Cement and Concrete Composites, 30(2), 63–71. doi:https://doi.org/10.1016/j.cemconcomp.2007.09.003
- Chung, C.-W., Shon, C.-S., & Kim, Y.-S. (2010). Chloride ion diffusivity of fly ash and silica fume concretes exposed to freeze–thaw cycles. Construction and Building Materials, 24(9), 1739–1745. doi:https://doi.org/10.1016/j.conbuildmat.2010.02.015
- Cohen, M. D., Zhou, Y., & Dolch, W. L. (1992). Non-air-entrained high-strength concrete – Is it frost resistant? Materials Journal, 89(4), 406–415.
- Deja, J. (2003). Freezing and de-icing salt resistance of blast furnace slag concretes. Cement and Concrete Composites, 25(3), 357–361. doi:https://doi.org/10.1016/S0958-9465(02)00052-5
- Dinakar, P., Kartik Reddy, M., & Sharma, M. (2013). Behaviour of self compacting concrete using Portland pozzolana cement with different levels of fly ash. Materials & Design, 46, 609–616. doi:https://doi.org/10.1016/j.matdes.2012.11.015
- Dransfield, J. M. (1987). Durability of concrete with a superplasticising admixture. In J. M. Scanlon (Ed.), Concrete Durability – Proceedings of Katherine and Bryant Mather International Conference, Special Publication-170 (Vol. 1, pp. 741–764). Detroit, MI: American Concrete Institute.
- EFNARC, S. (2002). Guidelines for self-compacting concrete. London: Association House (Vol. 32, p. 34).
- Fagerlund, G. (2004). A service life model for internal frost damage in concrete. TVBM-3119. Lund: Lund University.
- Fallah, S., & Nematzadeh, M. (2017). Mechanical properties and durability of high-strength concrete containing macro-polymeric and polypropylene fibers with nano-silica and silica fume. Construction and Building Materials, 132, 170–187. doi:https://doi.org/10.1016/j.conbuildmat.2016.11.100
- Fan, Y., Zhang, S., Wang, Q., & Shah, S. P. (2015). Effects of nano-kaolinite clay on the freeze–thaw resistance of concrete. Cement and Concrete Composites, 62, 1–12. doi:https://doi.org/10.1016/j.cemconcomp.2015.05.001
- Fan, Y. F., Zhang, S. Y., & Shah, S. P. (2016). Influence of nanoclay on concrete subjected to freeze-thaw cycles and bond behavior between rebar and concrete. Key Engineering Materials, 711, 256. doi:https://doi.org/10.4028/www.scientific.net/KEM.711.256
- Farzadnia, N., Abang Ali, A. A., Demirboga, R., & Anwar, M. P. (2013). Effect of halloysite nanoclay on mechanical properties, thermal behavior and microstructure of cement mortars. Cement and Concrete Research, 48, 97–104. doi:https://doi.org/10.1016/j.cemconres.2013.03.005
- Gao, X., Lo, Y., & Tam, C. (2002). Investigation of micro-cracks and microstructure of high performance lightweight aggregate concrete. Building and Environment, 37(5), 485–489. doi:https://doi.org/10.1016/S0360-1323(01)00051-8
- Garg, C., & Jain, A. (2014). Green concrete: efficient & eco-friendly construction materials. Impact Journal, 2(2), 259–264.
- Gesoğlu, M., & Özbay, E. (2007). Effects of mineral admixtures on fresh and hardened properties of self-compacting concretes: Binary, ternary and quaternary systems. Materials and Structures, 40(9), 923–937. doi:https://doi.org/10.1617/s11527-007-9242-0
- Gonzalez, M., Tighe, S. L., Hui, K., Rahman, S., & de Oliveira Lima, A. (2016). Evaluation of freeze/thaw and scaling response of nanoconcrete for Portland cement concrete (PCC) pavements. Construction and Building Materials, 120, 465–472. doi:https://doi.org/10.1016/j.conbuildmat.2016.05.043
- Grove, J., Vanikar, S., & Crawford, G. (2010). Nanotechnology: New tools to address old problems. Transportation Research Record: Journal of the Transportation Research Board, 2141(1), 47–51. doi:https://doi.org/10.3141/2141-09
- Hakamy, A., Shaikh, F. U. A., & Low, I. M. (2015). Characteristics of nanoclay and calcined nanoclay-cement nanocomposites. Composites Part B: Engineering, 78, 174–184. doi:https://doi.org/10.1016/j.compositesb.2015.03.074
- He, X., & Shi, X. (2008). Chloride permeability and microstructure of Portland cement mortars incorporating nanomaterials. Transportation Research Record: Journal of the Transportation Research Board, 2070(1), 13–21. doi:https://doi.org/10.3141/2070-03
- Ji, T. (2005). Preliminary study on the water permeability and microstructure of concrete incorporating nano-SiO2. Cement and Concrete Research, 35(10), 1943–1947. doi:https://doi.org/10.1016/j.cemconres.2005.07.004
- Júnior, N. A., Silva, G., & Ribeiro, D. (2017). Effects of the incorporation of recycled aggregate in the durability of the concrete submitted to freeze-thaw cycles. Construction and Building Materials, 161, 723–730.
- Kawashima, S., Kim, J. H., Corr, D. J., & Shah, S. P. (2012). Study of the mechanisms underlying the fresh-state response of cementitious materials modified with nanoclays. Construction and Building Materials, 36, 749–757. doi:https://doi.org/10.1016/j.conbuildmat.2012.06.057
- Langaroudi, M. A. M., & Mohammadi, Y. (2018). Effect of nano-clay on workability, mechanical, and durability properties of self-consolidating concrete containing mineral admixtures. Construction and Building Materials, 191, 619–634. doi:https://doi.org/10.1016/j.conbuildmat.2018.10.044
- Li, H., Zhang, M-h., & Ou, J-P. (2006). Abrasion resistance of concrete containing nano-particles for pavement. Wear, 260(11–12), 1262–1266. doi:https://doi.org/10.1016/j.wear.2005.08.006
- Mardani-Aghabaglou, A., Andiç-Çakir, Ö., & Ramyar, K. (2013). Freeze–thaw resistance and transport properties of high-volume fly ash roller compacted concrete designed by maximum density method. Cement and Concrete Composites, 37, 259–266. doi:https://doi.org/10.1016/j.cemconcomp.2013.01.009
- Mohseni, E., Miyandehi, B. M., Yang, J., & Yazdi, M. A. (2015). Single and combined effects of nano-SiO2, nano-Al2O3 and nano-TiO2 on the mechanical, rheological and durability properties of self-compacting mortar containing fly ash. Construction and Building Materials, 84, 331–340. doi:https://doi.org/10.1016/j.conbuildmat.2015.03.006
- Monteiro, P. (2006). Concrete: Microstructure, properties, and materials. New York: McGraw-Hill Publishing.
- Morsy, M. S., Alsayed, S. H., & Aqel, M. (2010). Effect of nano-clay on mechanical properties and microstructure of ordinary Portland cement mortar. International Journal of Civil & Environmental Engineering IJCEE-IJENS, 10(1), 23–27.
- Morsy, M. S., Alsayed, S. H., & Aqel, M. (2011). Hybrid effect of carbon nanotube and nano-clay on physico-mechanical properties of cement mortar. Construction and Building Materials, 25(1), 145–149. doi:https://doi.org/10.1016/j.conbuildmat.2010.06.046
- Nazari, A., & Riahi, S. (2010). Microstructural, thermal, physical and mechanical behavior of the self compacting concrete containing SiO2 nanoparticles. Materials Science and Engineering: A, 527(29/30), 7663–7672. doi:https://doi.org/10.1016/j.msea.2010.08.095
- Nazari, A., & Riahi, S. (2011). The role of SiO2 nanoparticles and ground granulated blast furnace slag admixtures on physical, thermal and mechanical properties of self compacting concrete. Materials Science and Engineering: A, 528(4–5), 2149–2157. doi:https://doi.org/10.1016/j.msea.2010.11.064
- Nehdi, M. (2014). Clay in cement-based materials: Critical overview of state-of-the-art. Construction and Building Materials, 51, 372–382. doi:https://doi.org/10.1016/j.conbuildmat.2013.10.059
- Norhasri, M. M., Hamidah, M., & Fadzil, A. M. (2017). Applications of using nano material in concrete: A review. Construction and Building Materials, 133, 91–97. doi:https://doi.org/10.1016/j.conbuildmat.2016.12.005
- Olgun, M. (2013). The effects and optimization of additives for expansive clays under freeze–thaw conditions. Cold Regions Science and Technology, 93, 36–46. doi:https://doi.org/10.1016/j.coldregions.2013.06.001
- Patel, K. (2012). The use of nanoclay as a constructional material. International Journal of Engineering Research and Applications, 2, 1382–1386.
- Pospíchal, O., Kucharczyková, B., Misák, P., & Vymazal, T. (2010). Freeze-thaw resistance of concrete with porous aggregate. Procedia Engineering, 2(1), 521–529. doi:https://doi.org/10.1016/j.proeng.2010.03.056
- Quercia, G., Spiesz, P., Hüsken, G., & Brouwers, H. (2014). SCC modification by use of amorphous nano-silica. Cement and Concrete Composites, 45, 69–81. doi:https://doi.org/10.1016/j.cemconcomp.2013.09.001
- Rashad, A. M. (2013). A synopsis about the effect of nano-Al2O3, nano-Fe2O3, nano-Fe3O4 and nano-clay on some properties of cementitious materials – a short guide for civil engineer. Materials & Design (1980–2015), 52, 143–157. doi:https://doi.org/10.1016/j.matdes.2013.05.035
- Richardson, A., Coventry, K., & Wilkinson, S. (2012). Freeze/thaw durability of concrete with synthetic fibre additions. Cold Regions Science and Technology, 83, 49–56. doi:https://doi.org/10.1016/j.coldregions.2012.06.006
- Safiuddin, M., West, J. S., & Soudki, K. A. (2012). Properties of freshly mixed self-consolidating concretes incorporating rice husk ash as a supplementary cementing material. Construction and Building Materials, 30, 833–842. doi:https://doi.org/10.1016/j.conbuildmat.2011.12.066
- Sanchez, F., & Sobolev, K. (2010). Nanotechnology in concrete – A review. Construction and Building Materials, 24(11), 2060–2071. doi:https://doi.org/10.1016/j.conbuildmat.2010.03.014
- Senff, L., Labrincha, J. A., Ferreira, V. M., Hotza, D., & Repette, W. L. (2009). Effect of nano-silica on rheology and fresh properties of cement pastes and mortars. Construction and Building Materials, 23(7), 2487–2491. doi:https://doi.org/10.1016/j.conbuildmat.2009.02.005
- Shaikh, F., Shafaei, Y., & Sarker, P. (2016). Effect of nano and micro-silica on bond behaviour of steel and polypropylene fibres in high volume fly ash mortar. Construction and Building Materials, 115, 690–698. doi:https://doi.org/10.1016/j.conbuildmat.2016.04.090
- Shakrani, S. A., Ayob, A., & Rahim, M. A. A. (2017). A review of nanoclay applications in the pervious concrete pavement. AIP Conference Proceedings. 1885(1), 020049.
- Shang, H.-S., & Yi, T.-H. (2013). Freeze-thaw durability of air-entrained concrete. The Scientific World Journal, 2013, 1, 1–6. doi:https://doi.org/10.1155/2013/650791
- Sobolev, K. (2005). Mechano-chemical modification of cement with high volumes of blast furnace slag. Cement and Concrete Composites, 27(7–8), 848–853. doi:https://doi.org/10.1016/j.cemconcomp.2005.03.010
- Sobolev, K., & Gutiérrez, M. F. (2005). How nanotechnology can change the concrete world. American Ceramic Society Bulletin, 84(10), 14–17.
- Stefan, J., & Hans, C. (1995). High strength concrete freeze/thaw test and cracking. Cement and Concrete Research, 25(8), 1775–1780.
- Sua-Iam, G., & Makul, N. (2014). Utilization of high volumes of unprocessed lignite-coal fly ash and rice husk ash in self-consolidating concrete. Journal of Cleaner Production, 78, 184–194. doi:https://doi.org/10.1016/j.jclepro.2014.04.060
- Uddin, F. (2008). Clays, nanoclays, and montmorillonite minerals. Metallurgical and Materials Transactions A, 39(12), 2804–2814. doi:https://doi.org/10.1007/s11661-008-9603-5
- Van den Heede, P., Furniere, J., & De Belie, N. (2013). Influence of air entraining agents on deicing salt scaling resistance and transport properties of high-volume fly ash concrete. Cement and Concrete Composites, 37, 293–303. doi:https://doi.org/10.1016/j.cemconcomp.2013.01.005
- Veniamin, D. (1996). An evaluation of frost actions on concrete. Concrete International, Design and Structure, 18(3), 42–43.
- Wu, H., Liu, Z., Sun, B., & Yin, J. (2016). Experimental investigation on freeze–thaw durability of Portland cement pervious concrete (PCPC). Construction and Building Materials, 117, 63–71. doi:https://doi.org/10.1016/j.conbuildmat.2016.04.130
- Yeganeh, J. K., Sadighi, M., & Kourki, H. (2008). Recycled HIPS and nanoclay in improvement of cement mortar properties. Malaysian Polymer Journal, 3(2), 32–38.
- Zhang, S., Fan, Y., & Li, N. (2014). Pore structure and freezing resistance of nanoclay modified cement based materials. Materials Research Innovations, 18(sup. 2), S2–358–S2-362. doi:https://doi.org/10.1179/1432891714Z.000000000434
- Zhang, X., Wang, L., & Zhang, J. (2017). Mechanical behavior and chloride penetration of high strength concrete under freeze-thaw attack. Cold Regions Science and Technology, 142, 17–24. doi:https://doi.org/10.1016/j.coldregions.2017.07.004