References
- Aouba, L. (2015). Caractérisation et conception de nouveaux matériaux et produits à base de terre cuite et d’agro-ressources [Characterization and design of new materials and products based on fired clay and agro-resource] (Doctoral dissertation). Université Toulouse III-Paul Sabatier.
- Aouba, L., Bories, C., Coutand, M., Perrin, B., & Lemercier, H. (2016). Properties of fired clay bricks with incorporated biomasses: Cases of olive stone flour and wheat straw residues. Construction and Building Materials, 102, 7–13. doi:https://doi.org/10.1016/j.conbuildmat.2015.10.040
- Bories, C., Borredon, M. E., Vedrenne, E., & Vilarem, G. (2014). Development of eco-friendly porous fired clay bricks using pore-forming agents: A review. Journal of Environmental Management, 143, 186–196. doi:https://doi.org/10.1016/j.jenvman.2014.05.006
- Demir, I. (2008). Effect of organic residues addition on the technological properties of clay bricks. Waste Management, 28(3), 622–627. doi:https://doi.org/10.1016/j.wasman.2007.03.019
- Domède, N. (2006). Méthode de requalification des ponts en maçonnerie [Method of requalification of masonry bridges] (Doctoral dissertation). Institut National des Sciences Appliquées de Toulouse, LMDC.
- Dondi, M., Guarini, G., & Raimondo, M. (1999). Trends in the formation of crystalline and amorphous phases during firing of clay bricks. Tile and Brick International, 15, 176–183.
- Dormieux, L., Kondo, D., & Ulm, F.-J. (2006). Microporomechanics. Wiley.
- Dormieux, L., & Ulm, F.-J. (2007). Applied micromechanics of porous materials. Vienna: Springer-Verlag.
- Eliche-Quesada, D., Martínez-García, C., Martínez-Cartas, M. L., Cotes-Palomino, M. T., Pérez-Villarejo, L., Cruz-Pérez, N., & Corpas-Iglesias, F. A. (2011). The use of different forms of waste in the manufacture of ceramic bricks. Applied Clay Science, 52(3), 270–276. doi:https://doi.org/10.1016/j.clay.2011.03.003
- Eshelby, J. D. (1957). The determination of the elastic field of an ellipsoidal inclusion and related problems. Proceedings of the Royal Society of London. Series A, Mathematical and Physical Sciences, 241(1226), 376–396.
- Giraud, A., Gruescu, C., Do, D., Homand, F., & Kondo, D. (2007). Effective thermal conductivity of transversely isotropic media with arbitrary oriented ellipsoidal inhomogeneities. International Journal of Solids and Structures, 44(9), 2627–2647. doi:https://doi.org/10.1016/j.ijsolstr.2006.08.011
- Hill, R. (1965). A self-consistent mechanics of composite materials. Journal of the Mechanics and Physics of Solids, 13(4), 213–222. doi:https://doi.org/10.1016/0022-5096(65)90010-4
- Hu, G., & Weng, G. (2000). Some reflections on the Mori-Tanaka and Ponte Castaneda-Willis methods with randomly oriented ellipsoidal inclusions. Acta Mechanica, 140(1-2), 31–40. doi:https://doi.org/10.1007/BF01175978
- José, A., Romero, I., Jiménez, J., & Castro, E. (2012). Fired clay masonry units production incorporating two-phase olive mill waste. Ceramics International, 38(6), 5027–5037. doi:https://doi.org/10.1016/j.ceramint.2012.03.003
- Kornmann, M. (2007). Clay bricks and roof tiles, manufacturing and properties. Paris: Société de L’industrie Minérale.
- Krakowiak, K. J., Lourenço, P. B., & Ulm, F.-J. (2011). Multitechnique investigation of extruded clay brick microstructure. Journal of the American Ceramic Society, 94(9), 3012–3022. doi:https://doi.org/10.1111/j.1551-2916.2011.04484.x
- Madurwar, M. V., Ralegaonkar, R. V., & Mandavgane, S. A. (2013). Application of agro-waste for sustainable construction materials: A review. Construction and Building Materials, 38, 872–878. doi:https://doi.org/10.1016/j.conbuildmat.2012.09.011
- Maillard, P., & Aubert, J. (2014). Effects of the anisotropy of extruded earth bricks on their hygrothermal properties. Construction and Building Materials, 63, 56–61. doi:https://doi.org/10.1016/j.conbuildmat.2014.04.001
- Mori, T., & Tanaka, K. (1973). Average stress in matrix and average elastic energy of materials with misfitting inclusions. Acta Metallurgica, 21(5), 571–574. doi:https://doi.org/10.1016/0001-6160(73)90064-3
- Mura, T. (1987). Micromechanics of defects in solids. Dordrecht: Springer Netherlands.
- Nelder, J. A., & Mead, R. (1965). A simplex method for function minimization. The Computer Journal, 7(4), 308–313. doi:https://doi.org/10.1093/comjnl/7.4.308
- Nigay, P.-M. (2015). Étude des transformations microstructurales de mélanges argile/biomasse lors de la cuisson et relations avec les propriétés mécaniques et thermiques [Study on the microstructural transformations of clay/biomass mixtures during firing and the relations between mechanical and thermal properties] (Doctoral dissertation). École Nationale Supérieure des Mines d’Albi-Carmaux.
- Oliveira, C. (2003). Experimental and numerical analysis of blocky masonry structures under cyclic loading (Doctoral dissertation). Universidade do Minho.
- Pérez-Villarejo, L., Eliche-Quesada, D., Iglesias-Godino, F. J., Martínez-García, C., & Corpas-Iglesias, F. A. (2012). Recycling of ash from biomass incinerator in clay matrix to produce ceramic bricks. Journal of Environmental Management, 95, S349–S354. doi:https://doi.org/10.1016/j.jenvman.2010.10.022
- Ponte Castañeda, P., & Willis, J. R. (1995). The effect of spatial distribution on the effective behavior of composite materials and cracked media. Journal of the Mechanics and Physics of Solids, 43(12), 1919–1951. doi:https://doi.org/10.1016/0022-5096(95)00058-Q
- Raut, S., Ralegaonkar, R., & Mandavgane, S. (2011). Development of sustainable construction material using industrial and agricultural solid waste: A review of waste-create bricks. Construction and Building Materials, 25(10), 4037–4042. doi:https://doi.org/10.1016/j.conbuildmat.2011.04.038
- Sobol, I. M. (1967). On the distribution of points in a cube and the approximate evaluation of integrals. USSR Computational Mathematics and Mathematical Physics, 7(4), 86–112.
- Sutcu, M. (2010). The use of paper processing residues in the development of ceramics with improved thermal insulation properties (Doctoral dissertation). Izmir Institute of Technology.
- Sutcu, M. (2015). Influence of expanded vermiculite on physical properties and thermal conductivity of clay bricks. Ceramics International, 41(2), 2819–2827. doi:https://doi.org/10.1016/j.ceramint.2014.10.102
- Sutcu, M., Alptekin, H., Erdogmus, E., Er, Y., & Gencel, O. (2015). Characteristics of fired clay bricks with waste marble powder addition as building materials. Construction and Building Materials, 82, 1–8. doi:https://doi.org/10.1016/j.conbuildmat.2015.02.055
- Torquato, S. (2002). Random heterogeneous materials: Microstructure and macroscopic properties. New York, NY: Springer-Verlag.
- Velasco, P. M., Ortiz, M. P. M., Giró, M. A. M., Melia, D. M., & Rehbein, J. H. (2015). Development of sustainable fired clay bricks by adding kindling from vine shoot: Study of thermal and mechanical properties. Applied Clay Science, 107, 156–164. doi:https://doi.org/10.1016/j.clay.2015.01.017
- Walpole, L. (1981). Elastic behavior of composite materials: Theoretical foundations. Advances in Applied Mechanics, 21, 169–242.
- Weng, G. (1992). Explicit evaluation of Willis’ bounds with ellipsoidal inclusions. International Journal of Engineering Science, 30(1), 83–92. doi:https://doi.org/10.1016/0020-7225(92)90123-X
- Willis, J. (1977). Bounds and self-consistent estimates for the overall properties of anisotropic composites. Journal of the Mechanics and Physics of Solids, 25(3), 185–202. doi:https://doi.org/10.1016/0022-5096(77)90022-9