References
- Abousleiman, Y. N., & Kanj, M. Y. (2004). The generalized Lamé problem—Part II: Applications in poromechanics. Journal of Applied Mechanics, 71(2), 180–189. doi:https://doi.org/10.1115/1.1683800
- Ardakani, S. M., & Ulm, F. J. (2013). Chemoelastic fracture mechanics model for cement sheath integrity. Journal of Engineering Mechanics, 140(4), 04013009. doi:https://doi.org/10.1061/(ASCE)EM.1943-7889.0000690
- Boumiz, A., Vernet, C., & Tenoudji, F. C. (1996). Mechanical properties of cement pastes and mortars at early ages: Evolution with time and degree of hydration. Advanced Cement Based Materials, 3, 94–106. doi:https://doi.org/10.1016/S1065-7355(96)90042-5
- Carnahan, C. (1983). Thermodynamic coupling of heat and matter flows in near-field regions of nuclear waste repositories. MRS Online Proceedings Library Archive, 26, 1023–1030.
- Cheng, A. H. D. (2016). Poroelasticity (Vol. 27). Cham: Springer.
- De Andrade, J., & Sangesland, S. (2016). Cement sheath failure mechanisms: Numerical estimates to design for long-term well integrity. Journal of Petroleum Science and Engineering, 147, 682–698. doi:https://doi.org/10.1016/j.petrol.2016.08.032
- Derjaguin, B., & Sidorenkov, G. (1941). Thermoosmosis at ordinary temperatures and its analogy with the thermomechanical effect in helium II. Comptes Rendus de l'Académie des Sciences, 32, 622–626.
- Detournay, E., & Cheng, A. D. (1988). Poroelastic response of a borehole in a non-hydrostatic stress field. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 25, 171–182. doi:https://doi.org/10.1016/0148-9062(88)92299-1
- Dormieux, L., Kondo, D., & Ulm, F. J. (2006). Microporomechanics. New York, NY: Wiley.
- El Bitouri, Y., Jamin, F., Pélissou, C., & El Youssoufi, M. (2017). Tensile and shear bond strength between cement paste and aggregate subjected to high temperature. Materials and Structures, 50(6), 234. doi:https://doi.org/10.1617/s11527-017-1105-8
- Falser, S., Uchida, S., Palmer, A., Soga, K., & Tan, T. (2012). Increased gas production from hydrates by combining depressurization with heating of the wellbore. Energy & Fuels, 26, 6259–6267. doi:https://doi.org/10.1021/ef3010652
- Gao, J., Deng, J., Lan, K., Song, Z., Feng, Y., & Chang, L. (2017). A porothermoelastic solution for the inclined borehole in a transversely isotropic medium subjected to thermal osmosis and thermal filtration effects. Geothermics, 67, 114–134. doi:https://doi.org/10.1016/j.geothermics.2017.01.003
- Gao, Y., Liu, Z., Zhuang, Z., Hwang, K. C., Wang, Y., Yang, L., & Yang, H. (2016). Cylindrical borehole failure in a poroelastic medium. Journal of Applied Mechanics, 83(6), 061005. doi:https://doi.org/10.1115/1.4032859
- García-Macías, E., D’Alessandro, A., Castro-Triguero, R., Pérez-Mira, D., & Ubertini, F. (2017). Micromechanics modeling of the electrical conductivity of carbon nanotube cement-matrix composites. Composites Part B: Engineering, 108, 451–469. doi:https://doi.org/10.1016/j.compositesb.2016.10.025
- Gelet, R., Loret, B., & Khalili, N. (2012). Borehole stability analysis in a thermoporoelastic dual-porosity medium. International Journal of Rock Mechanics and Mining Sciences, 50, 65–76. doi:https://doi.org/10.1016/j.ijrmms.2011.12.003
- Ghabezloo, S., Sulem, J., & Saint-Marc, J. (2009). The effect of undrained heating on a fluid-saturated hardened cement paste. Cement and Concrete Research, 39(1), 54–64. doi:https://doi.org/10.1016/j.cemconres.2008.09.004
- Ghassemi, A., Tao, Q., & Diek, A. (2009). Influence of coupled chemo-poro-thermoelastic processes on pore pressure and stress distributions around a wellbore in swelling shale. Journal of Petroleum Science and Engineering, 67(1–2), 57–64. doi:https://doi.org/10.1016/j.petrol.2009.02.015
- Gonçalvès, J., Ji Yu, C., Matray, J. M., & Tremosa, J. (2018). Analytical expressions for thermo-osmotic permeability of clays. Geophysical Research Letters, 45(2), 691–698. doi:https://doi.org/10.1002/2017GL075904
- Gonçalvès, J., & Trémosa, J. (2010). Estimating thermo-osmotic coefficients in clay-rocks: I. Theoretical insights. Journal of Colloid and Interface Science, 342(1), 166–174. doi:https://doi.org/10.1016/j.jcis.2009.09.056
- Kanfar, M. F., Chen, Z., & Rahman, S. (2017). Analyzing wellbore stability in chemically-active anisotropic formations under thermal, hydraulic, mechanical and chemical loadings. Journal of Natural Gas Science and Engineering, 41, 93–111. doi:https://doi.org/10.1016/j.jngse.2017.02.006
- Kim, S., & Mench, M. (2009). Investigation of temperature-driven water transport in polymer electrolyte fuel cell: Thermo-osmosis in membranes. Journal of Membrane Science, 328(1–2), 113–120. doi:https://doi.org/10.1016/j.memsci.2008.11.043
- Kurashige, M. (1992). Thermal stresses of a fluid-saturated poroelastic hollow cylinder. JSME International Journal. Ser. 1, Solid Mechanics, Strength of Materials, 35(4), 386–391. doi:https://doi.org/10.1299/jsmea1988.35.4_386
- Lavrov, A., & Torsaeter, M. (2016). Physics and mechanics of primary well cementing. Cham: Springer.
- Lienhard, J. H. (2013). A heat transfer textbook. North Chelmsford, MA: Courier Corporation.
- Loh, M., Too, J. L., Falser, S., Linga, P., Khoo, B. C., & Palmer, A. (2014). Gas production from methane hydrates in a dual wellbore system. Energy & Fuels, 29, 35–42. doi:https://doi.org/10.1021/ef501769r
- Lura, P., Jensen, O. M., & van Breugel, K. (2003). Autogenous shrinkage in high-performance cement paste: An evaluation of basic mechanisms. Cement and Concrete Research, 33(2), 223–232. doi:https://doi.org/10.1016/S0008-8846(02)00890-6
- Petersen, T. A. (2015). Chemo-poro-elastic fracture mechanics of wellbore cement liners: The role of eigenstress and pore pressure on the risk of fracture (Ph.D. thesis), Massachusetts Institute of Technology, Cambridge, MA.
- Schiffman, R. L., Chen, A., & Jordan, J. C. (1969). An analysis of consolidation theories. Journal of Soil Mechanics & Foundations Div, 95, 285–312.
- Shi, Y., Li, B., Guo, B., Guan, Z., & Li, H. (2015). An analytical solution to stress state of casing-cement sheath-formation system with the consideration of its initial loaded state and wellbore temperature variation. International Journal of Emerging Technology and Advanced Engineering, 5, 59–65.
- Stehfest, H. (1970). Algorithm 368: Numerical inversion of Laplace transforms [D5]. Communications of the ACM, 13(1), 47–49. doi:https://doi.org/10.1145/361953.361969
- Tian, Z., Shi, L., & Qiao, L. (2015). Research of and countermeasure for wellbore integrity of shale gas horizontal well. Natural Gas Industry, 35, 70–76.
- Trémosa, J., Gonçalvès, J., Matray, J., & Violette, S. (2010). Estimating thermo-osmotic coefficients in clay-rocks: II. In situ experimental approach. Journal of Colloid and Interface Science, 342(1), 175–184. doi:https://doi.org/10.1016/j.jcis.2009.09.055
- Wang, L., Bornert, M., Héripré, E., Chanchole, S., Pouya, A., & Halphen, B. (2015). Microscale insight into the influence of humidity on the mechanical behavior of mudstones. Journal of Geophysical Research: Solid Earth, 120, 3173–3186. doi:https://doi.org/10.1002/2015JB011953
- Wang, L., Pouya, A., Bornert, M., & Halphen, B. (2014). Modelling the internal stress field in argillaceous rocks under humidification/desiccation. International Journal for Numerical and Analytical Methods in Geomechanics, 38(16), 1664–1682. doi:https://doi.org/10.1002/nag.2267
- Wang, W., & Taleghani, A. D. (2014). Three-dimensional analysis of cement sheath integrity around wellbores. Journal of Petroleum Science and Engineering, 121, 38–51. doi:https://doi.org/10.1016/j.petrol.2014.05.024
- Wang, Y., & Dusseault, M. B. (2003). A coupled conductive–convective thermo-poroelastic solution and implications for wellbore stability. Journal of Petroleum Science and Engineering, 38(3–4), 187–198. doi:https://doi.org/10.1016/S0920-4105(03)00032-9
- Xia, Y., Jin, Y., Chen, M., & Lu, Y. (2017). Dynamic analysis of a cylindrical casing–cement structure in a poroelastic stratum. International Journal for Numerical and Analytical Methods in Geomechanics, 41(12), 1362–1389. doi:https://doi.org/10.1002/nag.2680
- Yang, R., Gui, Q., Lemarchand, E., Fen-Chong, T., & Li, K. (2015). Micromechanical modeling of transport properties of cement-based composites: Role of interfacial transition zone and air voids. Transport in Porous Media, 110(3), 591–611. doi:https://doi.org/10.1007/s11242-015-0574-x
- Yang, R., Lemarchand, E., & Fen-Chong, T. (2016). A micromechanics model for solute diffusion coefficient in unsaturated granular materials. Transport in Porous Media, 111(2), 347–368. doi:https://doi.org/10.1007/s11242-015-0597-3
- Yang, R., Lemarchand, E., Fen-Chong, T., & Azouni, A. (2015). A micromechanics model for partial freezing in porous media. International Journal of Solids and Structures, 75, 109–121. doi:https://doi.org/10.1016/j.ijsolstr.2015.08.005
- Yang, R., Li, K., Lemarchand, E., & Fen-Chong, T. (2016). Micromechanics modeling the solute diffusivity of unsaturated granular materials. International Journal of Multiphase Flow, 79, 1–9. doi:https://doi.org/10.1016/j.ijmultiphaseflow.2015.10.004
- Zhang, Z., & Wang, H. (2017). Effect of thermal expansion annulus pressure on cement sheath mechanical integrity in hpht gas wells. Applied Thermal Engineering, 118, 600–611. doi:https://doi.org/10.1016/j.applthermaleng.2017.02.075
- Zheng, L., & Samper, J. (2008). A coupled THMC model of FEBEX mock-up test. Physics and Chemistry of the Earth, Parts A/B/C, 33, S486–S498. doi:https://doi.org/10.1016/j.pce.2008.10.023
- Zhou, S., Dong, Y., & Yang, H. (2008). Thermal dilation coefficients of several hardened cement pastes (in Chinese). Journal of Yangtze River Scientific Research Institute, 25, 70–72.
- Zimmerman, R. (2000). Coupling in poroelasticity and thermoelasticity. International Journal of Rock Mechanics and Mining Sciences, 37(1–2), 79–87. doi:https://doi.org/10.1016/S1365-1609(99)00094-5