References
- ACI318 (2008). Building code requirements for structural concrete (ACI 318-08) and commentary. New York, USA: Author.
- Ali, F., Ali, N., & Abu-Tair, A. (2011). Explosive spalling of normal strength concrete slabs subjected to severe fire. Materials and Structures, 44(5), 943–956. doi:https://doi.org/10.1617/s11527-010-9678-5
- Ali, F. A., Nadjai, A., Glackin, P., Silcock, G. W. H., & Abu-Tair, A. (2002). Structural performance of high strength concrete columns. In Fire seventh international association of fire safety science symposium (pp. 1001–1012), Worcester, MA, USA. doi:https://doi.org/10.3801/IAFSS.FSS.7-1001
- Bamonte, P., Gambarova, P. G., & Meda, A. (2008). Today’s concretes exposed to fire—Test results and sectional analysis. Structural Concrete, 9(1), 19–29. doi:https://doi.org/10.1680/stco.2008.9.1.19
- Behnam, B. (2017). Post-earthquake fire analysis in urban structures: Risk management strategies (1st ed.). New York, NY: CRC Press/Taylor & Francis Group.
- Behnam, B., & Ronagh, H. (2014). Performance-based vulnerability assessment of multi-story reinforced concrete structures exposed to pre- and post-earthquake fire. Journal of Earthquake Engineering, 18(6), 853–875. doi:https://doi.org/10.1080/13632469.2014.914454
- Behnam, B., Ronagh, H. R., & Lim, P. J. (2015). Numerical evaluation of the post-earthquake fire resistance of CFRP-strengthened reinforced concrete joints based on experimental observations. European Journal of Environmental and Civil Engineering, 20, 1–19. doi:https://doi.org/10.1080/19648189.2015.1018448
- Braxtan, N. L., & Pessiki, S. P. (2011). Post earthquake fire performance of sprayed fire-resistive material on steel moment frames. Journal of Structural Engineering, 137(9), 946–953. doi:https://doi.org/10.1061/(ASCE)ST.1943-541X.0000441
- Chung, K. F. (2006). Fire resistance design of composite slabs in building structures: From research to practice. The Structural Engineer, 84(20), 30–36.
- Connolly, R. J. (1995). The spalling of concrete in fires. Aston: Aston University.
- Deeny, S., Stratford, T., Dhakal, R., Moss, P., & Buchanan, A. (2009). Spalling of concrete, implications for structural performance in fire. International conference of structural fire engineering, Prague, UK.
- Denoël, J. F. (2007). Fire safety and concrete structures. Brussels Federation of Belgian Cement Industry.
- Drysdale, D. (2011). An introduction to fire dynamics (3rd ed.). Chichester: John Wiley & Sons.
- EN1991-1-2 (2002). Eurocode 1: Actions on structures – Part 1-2: General actions – Actions on structures exposed to fire. Brussels, Belgium: CEN.
- En, B. (1991). Eurocode 1: Actions on structures NA to BS EN.
- FEMA356 (2000). Prestandard and commentary for the seismic rehabilitation of buildings rehabilitation requirements. Washington, DC: American Society of Civil Engineers.
- Franssen, J.-M., & Gernay, T. (2017). Modeling structures in fire with SAFIR®: Theoretical background and capabilities. Journal of Structural Fire Engineering, 8(3), 300–323. doi:https://doi.org/10.1108/JSFE-07-2016-0010
- Fu, F. (2016). 3D finite element analysis of the whole-building behavior of tall building in fire. Advances in Computational Design, 1(4), 329–344. doi:https://doi.org/10.12989/acd.2016.1.4.329
- Gernay, T., & Franssen, J. M. (2015). A performance indicator for structures under natural fire. Engineering Structures, 100(0), 94–103. doi:https://doi.org/10.1016/j.engstruct.2015.06.005
- Hertz, K. D. (2003). Limits of spalling of fire-exposed concrete. Fire Safety Journal, 38(2), 103–116. doi:https://doi.org/10.1016/S0379-7112(02)00051-6
- Hertz, K. D., & Sørensen, L. S. (2005). Test method for spalling of fire exposed concrete. Fire Safety Journal, 40(5), 466–476. doi:https://doi.org/10.1016/j.firesaf.2005.04.001
- Holicky, M., Meterna, A., Sedlacek, G., & Schleich, J.-B. (2005). Implementation of Eurocodes, Handbook 5, Design of buildings for the fire situation. Luxemboug: Leonardo da Vinci Pilot Project.
- Jansson, R., & Boström, L. (2010). The influence of pressure in the pore system on fire spalling of concrete. Fire Technology, 46(1), 217–230. doi:https://doi.org/10.1007/s10694-009-0093-9
- Kalifa, P., Menneteau, F.-D., & Quenard, D. (2000). Spalling and pore pressure in HPC at high temperatures. Cement and Concrete Research, 30(12), 1915–1927. doi:https://doi.org/10.1016/S0008-8846(00)00384-7
- Khoury, G. A. (2000). Effect of fire on concrete and concrete structures. Progress in Structural Engineering and Materials, 2(4), 429–447. doi:https://doi.org/10.1002/pse.51
- Khoury, G. A., & Anderberg, Y. (2000). Concrete spalling review. Fire Safety Design.
- Kodur, V., & Dwaikat, M. (2012). Fire-induced spalling in reinforced concrete beams. Proceedings of the Institution of Civil Engineers – Structures and Buildings, 165(7), 347–359.
- Kodur, V. K. R., & Sultan, M. A. (1998). Structural behaviour of high strength concrete columns exposed to fire. Montreal, Canada: National Research Council Canada.
- Majorana, C. E., Salomoni, V. A., Mazzucco, G., & Khoury, G. A. (2010). An approach for modelling concrete spalling in finite strains. Mathematics and Computers in Simulation, 80(8), 1694–1712. doi:https://doi.org/10.1016/j.matcom.2009.05.011
- Maraveas, C. (2019). Local buckling of steel members under fire conditions: A review. Fire Technology, 55(1), 51–80. doi:https://doi.org/10.1007/s10694-018-0768-1
- Mavroeidis, G. P., & Papageorgiou, A. S. (2003). A mathematical representation of near-fault ground motions. Bulletin of the Seismological Society of America, 93(3), 1099–1131. doi:https://doi.org/10.1785/0120020100
- Park, R., & Paulay, T. (1975). Reinforced concrete structures. New York, NY: John Wiley & Sons.
- Peng, G.-F., Yang, W.-W., Zhao, J., Liu, Y.-F., Bian, S.-H., & Zhao, L.-H. (2006). Explosive spalling and residual mechanical properties of fiber-toughened high-performance concrete subjected to high temperatures. Cement and Concrete Research, 36(4), 723–727. doi:https://doi.org/10.1016/j.cemconres.2005.12.014
- Purkiss, J. A. (1996). Fire safety engineering: Design of structures (2nd ed.). Burlington, MA: Elsevier.
- SAP2000-V14 (2002). Integrated finite element analysis and design of structures basic analysis reference manual. Berkeley, CA: Computers and Structures, Inc.
- Scawthorn, C. (1987). Fire following earthquake: Estimates of the conflagration risk to insured property in greater Los Angeles and San Francisco. New York: American Society of Civil Engineers.
- Schrefler, B. A., Majorana, C. E., Khoury, G. A., & Gawin, D. (2002). Thermo-hydro-mechanical modelling of high performance concrete at high temperatures. Engineering Computations, 19(7), 787–819. doi:https://doi.org/10.1108/02644400210444320
- Tondini, N., & Franssen, J.-M. (2017). Analysis of experimental hydrocarbon localised fires with and without engulfed steel members. Fire Safety Journal, 92, 9–22. doi:https://doi.org/10.1016/j.firesaf.2017.05.011
- Wen, B., Wu, B., & Niu, D. (2015). Post-earthquake fire performance of reinforced concrete columns. Structure and Infrastructure Engineering, 12, 1–21. doi:https://doi.org/10.1080/15732479.2015.1085883
- Wu, B., Xiong, W., & Liu, F. (2017). Fire behaviours of concrete columns with prior seismic damage. Magazine of Concrete Research, 69, 1–14. doi:https://doi.org/10.1680/jmacr.15.00497
- Zaharia, R., & Pintea, D. (2009). Fire after earthquake analysis of steel moment resisting frames. International Journal of Steel Structures, 9(4), 275–284. doi:https://doi.org/10.1007/BF03249501