References
- Akiyama, M., Abe, S., Aoki, N., & Suzuki, M. (2012). Flexural test of precast high-strength reinforced concrete pile prestressed with unbonded bars arranged at the center of the cross-section. Engineering Structures, 34, 259–270. doi:https://doi.org/10.1016/j.engstruct.2011.09.007
- Amran, Y.H.M., Alyousef, R., Rashid, R.S.M., Alabduljabbar, H., & Hung, C. C. (2018). Properties and applications of FRP in strengthening RC structures: A review. Structures, 16(2018), 208–238. doi:https://doi.org/10.1016/j.istruc.2018.09.008
- Anandakumar, R., Selvamony, C., & Seeni, A. (2014). Performance of BFRP retrofitted RCC piles subjected to axial loads. Advances in Materials Science and Engineering, 2014, 323909. doi:https://doi.org/10.1155/2014/323909
- Bang, J.W., Hyun, J.H., Lee, B.Y., Lee, S.S., & Kim, Y.Y. (2013). Flexural strength of PHC pile reinforced with infilled concrete, transverse and longitudinal reinforcements. Journal of the Korea Concrete Institute, 25(1), 91–98. doi:https://doi.org/10.4334/JKCI.2013.25.1.091
- Berozashvili, M. (2001). Continuous reinforcing fibers are being offered for construction, civil engineering and other composites applications. Advanced Material Composite News, Composite Worldwide, 21(6), 5–6.
- Canadian Standards Association (CSA) (2014). Canadian highway bridge design code. CAN/CSA S6-14, Mississauga, Ontario, Canada.
- Darwaman, M.S., & Stewart, M.G. (2007). Spatial time-dependent reliability analysis of corroding pretensioned prestressed concrete bridge girders. Structural Safety, 29, 16–31. doi:https://doi.org/10.1016/j.strusafe.2005.11.002
- Elgabbas, F., Ahmed, E., & Benmokrane, B. (2016). Experimental testing of concrete bridge-deck slabs reinforced with basalt-FRP reinforcing bars under concentrated loads. Journal of Bridge Engineering, 21(7), 04016029. doi:https://doi.org/10.1061/(ASCE)BE.1943-5592.0000892
- Fam, A. Z., & Rizkalla, S. H. (2002). Flexural behavior of concrete-filled fiber-reinforced polymer circular tubes. Journal of Composites for Construction, 6(2), 123–132. doi:https://doi.org/10.1061/(ASCE)1090-0268(2002)6:2(123)
- Feng, W. (2015). Study on performance degradation of high-piled wharf structure in port engineering (PhD’s thesis). Shanghai Jiao Tong University, Shanghai, China.
- GB/T50081-2002 (2003). Standard for test method of mechanical properties on ordinary concrete. Beijing, China: China Architecture and Building Press.
- GB13476-2009 (2010). Pretensioned spun concrete piles. Beijing, China: China Architecture and Building Press.
- Ikeda, S., Tsubaki, T., & Yamaguchi, T. (1982). Ductility improvement of prestressed concrete piles. Transactions of the Japan Concrete Institute, 113(2), 531–538.
- JGJ/T 406-2017 (2018). Technical standard for prestressed concrete pipe pile. Beijing, China: China Architecture and Building Press.
- Mantas, A., Juozas, V., & Edgaras, A. (2017). Experimental study of concrete beams prestressed with basalt fiber reinforced polymers. Part I: Flexural behavior and serviceability. Composite Structures, 183 (2018), 114–123. doi:https://doi.org/10.1016/j.compstruct.2017.01.081
- Marsh, P.S., & Frangopol, D.M. (2008). Reinforced concrete bridge deck reliability model incorporating temporal and spatial variations of probabilistic corrosion rate sensor data. Reliability Engineering & System Safety, 93(3), 394–409. doi:https://doi.org/10.1016/j.ress.2006.12.011
- Mousa, S., Mohamed, H.M., & Benmokrane, B. (2018). Flexural Strength and Design Analysis of Circular Reinforced Concrete Members with Glass Fiber-Reinforced Polymer Bars and Spirals. ACI Structural Journal, 115(5), 1353–1364. doi:https://doi.org/10.14359/51702282
- Mousa, S., Mohamed, H.M., & Benmokrane, B. (2019). Strength and Deformability Aspects of Circular Concrete Members Reinforced with Hybrid Carbon-FRP and Glass-FRP under Flexure. Journal of Composites for Construction, 23(2), 04019005. 2019. 040190052). doi:https://doi.org/10.1061/(ASCE)CC.1943-5614.0000931
- Muguruma, H., Watanabe, F., & Nishiyama, M. (1987). Improving the flexural ductility of pretensioned high strength spun concrete piles by lateral confining of concrete. Proceedings of the Pacific Conference on Earthquake Engineering, Wairakei, New Zealand (Vol. 1, pp. 385–396.)
- Mullins, G., Sen, R., Kwangsuk, S., & Danny, W. (2005). Underwater fiber-reinforced polymers repair of prestressed piles in the Allen Creek Bridge. Journal of Composites for Construction, 9(2), 136–146. doi:https://doi.org/10.1061/(ASCE)1090-0268(2005)9:2(136)
- Murugan, M., Natarajan, C., & Muthukkumaran, K. (2014). Experimental investigation on GFRP strengthened RC piles under lateral loads. International Journal of Forensic Engineering, 2(1), 15–28. doi:https://doi.org/10.1504/IJFE.2014.059244
- Ovitigala, T., Ibrahim, M.A., & Issa, M.A. (2016). Serviceability and ultimate load behavior of concrete beams reinforced with basalt fiber-reinforced polymer bars. ACI Structure Journal, 113(4), 757–768.
- Ping, W., Yang, G., Dayong, Z., Weiliang, J., Zhenhua, Z., & Rongzhu, L. (2019). Flexural performances of prestressed high strength concrete piles reinforced with hybrid GFRP and steel bars. Marine Georesources & Geotechnology. doi:https://doi.org/10.1080/1064119X.2019.1600081
- Purushotham Reddy, B., Alagusundaramoorthy, P., & Sundaravadivelu, R. (2009). Retrofitting of RC piles using GFRP composites. KSCE Journal of Civil Engineering, 13(1), 39–47. doi:https://doi.org/10.1007/s12205-009-0039-2
- Selvamony, C., Anandakumar, R., Seeni, A., & Sivakumar, S. (2015). Effects of orientation on basalt fibres retrofitted RCC piles subjected to lateral loads. Indian Journal of Science and Technology, 8(29), 1–8. doi:https://doi.org/10.17485/ijst/2015/v8i29/86810
- Seo, J. H., Cheon, J. U., Shin, K. Y., Kim, S. H., & Yoon, S. J. (2017). Flexural Performance Evaluation of Hybrid Concrete Filled Fiber Reinforced Polymer Plastic (FRP) Tube Connection. Key Engineering Materials, 730, 347–352. doi:https://doi.org/10.4028/www.scientific.net/KEM.730.347
- Sgambi, L., Malerba, P.G., Gotti, G., & Ielmini, D. (2012). Seismic performance of pile-supported wharf structures considering soil-structure interaction in liquefied soil. Earthquake Spectra, 28(2), 729–757.
- Tomlinson, D., & Fam, A. Z. (2015). Performance of concrete beams reinforced with basalt FRP for flexure and shear. Journal of Composites for Construction, 19(2), 04014036. doi:https://doi.org/10.1061/(ASCE)CC.1943-5614.0000491
- Vahid, T., Vahab, T., Hamid, S., Saeed, A., & Ehsan, K. (2017). Behavior of polymer concrete beam/pile confined with CFRP sleeves. Mechanics of Advanced Materials and Structures, 26(4), 333–340. doi:https://doi.org/10.1080/15376494.2017.1387323.
- Val, D., & Stewart, M.G. (2003). Life-cycle cost analysis of reinforced concrete structures in marine environments. Structural Safety, 25(4), 343–362. doi:https://doi.org/10.1016/S0167-4730(03)00014-6
- Valez, J.G., & Rayhani, M.T. (2016). Axial and lateral load transfer of fiber-reinforced polymer (FRP) piles in soft clay. International Journal of Geotechnical Engineering, 11(2), 149–155. doi:https://doi.org/10.1080/19386362.2016.1198109
- Wang, X.L., Gao, H.Z., Zhou, T.H., & Du, L. (2012). Experimental studies of flexural behavior of new type prestressed concrete pipe pile with compound un-prestressed reinforcement. Industrial Construction, 42(8), 64–68.
- Yang, Z., Li, G., Wang, W., & Lv, Y. (2018). Study on the Flexural Performance of Prestressed High Strength Concrete Pile. KSCE Journal of Civil Engineering, 22(10), 4073–4082. doi:https://doi.org/10.1007/s12205-018-1811-y
- YG101. (2009). Prestressed concrete pipe pile with compound un-prestressed reinforcement. Henan, China: China Architecture and Building Press.
- Zhou, J., Erwin, O., Zhang, X., Botlton, M., Qin, H., & Zhang, L. (2017). Deflection behavior of GFRP Bar Reinforced Concrete Passive Bored Pile in Deep Excavation Construction. Geotechnical Engineering Journal of the SEAGS & AGSSEA, 48(3), 102–109.
- Zhu, B., Zhu, Z., Li, T., Liu, J., & Liu, Y. (2017). Field tests of offshore driven piles subjected to lateral monotonic and cyclic loads in soft clay. Journal of Waterway, Port, Coastal, and Ocean Engineering, 143(5), 05017003. doi:https://doi.org/10.1061/(ASCE)WW.1943-5460.0000399