References
- Al Saffar, D. M. A.-R. (2017). Experimental investigation of using ultra-fine glass powder in concrete. The International Journal of Applied Engineering Research, 7(9), 33–39. https://doi.org/10.9790/9622-0709083339
- Al Saffar, D. M. A.-R. & Al Quraishy, Q. A. (2018). Strength of lightweight aggregate foamed concrete exposed to elevated temperatures. Journal of Engineering and Applied Sciences, 12(12), 3380–3886.
- Ali, M. H., Dinkha, Y. Z., & Haido, J. H. (2017). Mechanical properties and spalling at elevated temperature of high performance concrete made with reactive and waste inert powders. Engineering Science and Technology, an International Journal, 20(2), 536–541. https://doi.org/https://doi.org/10.016/j.jestch.2016.12.004
- Amin, M., El-Gamal, S., & Hashem, F. (2015). Fire resistance and mechanical properties of carbon nanotubes–clay bricks wastes (Homra) composites cement. Construction and Building Materials, 98, 237–249. https://doi.org/https://doi.org/10.016/j.conbuildmat.2015.08.074
- ASTM C143-10a (2012). Standard test method for slump of hydraulic-cement concrete. ASTM International.
- ASTM C150 (2017). 150 standard specification for Portland cement, ICS number code. ASTM International.
- ASTM C642. (2012). Standard test method for density, absorption, and voids in hardened concrete. ASTM International.
- ASTM C78. (2010). Standard test method for flexural strength of concrete (using simple beam with third-point loading). American Society for Testing and Materials.
- BS 1881: Part 116:1983 (BSI). (1983). Method for determination of compressive [strength of concrete cubes]. British Standards Institution (BSI).
- Bui, D., Hu, J., & Stroeven, P. (2005). Particle size effect on the strength of rice husk ash blended gap-graded Portland cement concrete. Cement and Concrete Composites, 27(3), 357–366. https://doi.org/https://doi.org/10.016/j.cemconcomp.2004.05.002
- Castillo, C. (1987). Effect of transient high temperature on high-strength concrete. Rice University.
- Cheng, F.-P., Kodur, V., & Wang, T.-C. (2004). Stress-strain curves for high strength concrete at elevated temperatures. Journal of Materials in Civil Engineering, 16(1), 84–90. https://doi.org/https://doi.org/10.061/(ASCE)0899-1561(2004)16:1(84)
- Denoël, J. (2007). Fire safety and concrete structures. Febelcem.
- Du, H., & Tan, K. H. (2017). Properties of high volume glass powder concrete. Cement and Concrete Composites, 75, 22–29. https://doi.org/https://doi.org/10.016/j.cemconcomp.2016.10.010
- Elaqra, H., & Rustom, R. (2018). Effect of using glass powder as cement replacement on rheological and mechanical properties of cement paste. Construction and Building Materials, 179, 326–335. https://doi.org/https://doi.org/10.016/j.conbuildmat.2018.05.263
- El-Didamony, H., El-Rahman, E. A., & Osman, R. M. (2012). Fire resistance of fired clay bricks–fly ash composite cement pastes. Ceramics International, 38(1), 201–209. https://doi.org/https://doi.org/10.016/j.ceramint.2011.06.050
- El-Gamal, S. M., & Hashem, F. S. (2017). Enhancing the thermal resistance and mechanical properties of hardened Portland cement pastes by using pumice and Al 2 O 3. Journal of Thermal Analysis and Calorimetry, 128(1), 15–27. https://doi.org/https://doi.org/10.007/s10973-016-5863-2
- Foong, K. Y., Alengaram, U. J., Jumaat, M. Z., & Mo, K. H. (2015). Enhancement of the mechanical properties of lightweight oil palm shell concrete using rice husk ash and manufactured sand. Journal of Zhejiang University-Science A, 16(1), 59–69. https://doi.org/https://doi.org/10.631/jzus.A1400175
- Hager, I. (2013). Behaviour of cement concrete at high temperature. Bulletin of the Polish Academy of Sciences: Technical Sciences, 61(1), 145–154. https://doi.org/https://doi.org/10.478/bpasts-2013-0013
- Hunashyal, A., Banapurmath, N., Jain, A., Quadri, S., & Shettar, A. (2014). Experimental investigation on the effect of multi-walled carbon nanotubes and nano-SiO2 addition on mechanical properties of hardened cement paste. Advances in Materials, 3(5), 45–51. https://doi.org/https://doi.org/10.1648/j.am.20140305.13
- Iqs, N. (1984). Natural sources of gravel that it used in concrete and construction. Central Organization and Quality Control.
- Jubeh, A. I., Al Saffar, D. M., & Tayeh, B. A. (2019). Effect of recycled glass powder on properties of cementitious materials contains styrene butadiene rubber. Arabian Journal of Geosciences, 12(2), 39. https://doi.org/https://doi.org/10.007/s12517-018-4212-0
- Khoury, G. A. (2000). Effect of fire on concrete and concrete structures. Progress in Structural Engineering and Materials, 2(4), 429–447. https://doi.org/https://doi.org/10.002/pse.51
- Kodur, V. (2014). Properties of concrete at elevated temperatures. ISRN Civil Engineering, 2014, 1–15. https://doi.org/https://doi.org/10.155/2014/468510
- Kodur, V., Dwaikat, M., & Raut, N. (2009). Macroscopic FE model for tracing the fire response of reinforced concrete structures. Engineering Structures, 31(10), 2368–2379. https://doi.org/https://doi.org/10.016/j.engstruct.2009.05.018
- Lankard, D. R., Birkimer, D. L., Fondriest, F. F., & Snyder, M. J. (1971). Effects of moisture content on the structural properties of Portland cement concrete exposed to temperatures up to 500F. Special Publication, 25, 59–102.
- Meena, A., & Singh, R. (2012). Comparative study of waste glass powder as pozzolanic material in concrete.
- Mehta, P. K., & Paulo, J. M. (2006). Concrete microstructure, properties, and materials, McGraw-Hill Publishing.
- Mousa, M., Cuenca, E., Ferrara, L., Roy, N., & Tagnit-Hamou, A. (2017). Tensile characterization of an “Eco-Friendly” UHPFRC with waste glass powder and glass sand [Paper presentation]. International Conference on Strain-Hardening Cement-Based Composites, Springer.
- Neville, A. (1996). Properties of concrete. John Wiley & Sons Inc.
- Patel, P. (2012). Comparative study of waste glass powder as pozzolanic material in concrete [MSc thesis]. Department of Civil Engineering National Institute of Technology Rourkela.
- Sadawy, M. M. (2014). Effect of Al2O3 additives on the corrosion and electro chemical behavior of steel embedded in ordinary Portland cement concrete. American Journal of Material Research, 4(1), 53–58.
- Saraswathy, V., & Song, H.-W. (2006). Electrochemical studies on the corrosion performance of steel embedded in activated fly ash blended concrete. Electrochimica Acta, 51(22), 4601–4611. https://doi.org/https://doi.org/10.016/j.electacta.2006.01.005
- Shi, C., Wu, Y., Riefler, C., & Wang, H. (2005). Characteristics and pozzolanic reactivity of glass powders. Cement and Concrete Research, 35(5), 987–993. https://doi.org/https://doi.org/10.016/j.cemconres.2004.05.015
- Tayeh, B. A. (2018). Effects of marble, timber, and glass powder as partial replacements for cement. Journal of Civil Engineering and Construction, 7(2), 63–63. https://doi.org/https://doi.org/10.2732/jcec.2018.7.2.63
- Tayeh, B. A., Al Saffar, D. M., Aadi, A. S., & Almeshal, I. (2019). Sulphate resistance of cement mortar contains glass powder. Journal of King Saud University-Engineering Sciences.
- Tayeh, B. A., Bakar, B. A., & Johari, M. M. (2013). Characterization of the interfacial bond between old concrete substrate and ultra high performance fiber concrete repair composite. Materials and Structures, 46(5), 743–753. https://doi.org/https://doi.org/10.617/s11527-012-9931-1
- Topçu, İ. B., Uygunoğlu, T., & Hocaoğlu, İ. (2012). Electrical conductivity of setting cement paste with different mineral admixtures. Construction and Building Materials, 28(1), 414–420. https://doi.org/https://doi.org/10.016/j.conbuildmat.2011.08.068
- Tutikian, B. F., Fernandes, B., Gil, A., & Bolina, F. (2017). Microestrutura do concreto submetido a altas temperaturas: Alterações físico-químicas e técnicas de análise. Revista IBRACON de Estruturas e Materiais, 10(4), 838–863.
- Wang, H.-Y., & Huang, W.-L. (2010). Durability of self-consolidating concrete using waste LCD glass. Construction and Building Materials, 24(6), 1008–1013. https://doi.org/https://doi.org/10.016/j.conbuildmat.2009.11.018