References
- Ahn, B. K., & Curtin, W. A. (1997). Strain and hysteresis by stochastic matrix cracking in ceramic matrix composites. Journal of the Mechanics and Physics of Solids, 45(2), 177–209. https://doi.org/https://doi.org/10.1016/S0022-5096(96)00081-6
- Al-Gemeel, A. N., & Zhuge, Y. (2019). Using textile reinforced engineered cementitious composite for concrete columns confinement. Composite Structures, 210, 695–706. https://doi.org/https://doi.org/10.1016/J.COMPSTRUCT.2018.11.093
- Ambroise, J., & Michel, M. (2015). Mineral matrix for the production of thin composites by impregnating woven or non woven reinforcements. WO 2015/158896 A1, 2015.
- Barton, E. N., Ogin, S. L., Thorne, A. M., Reed, G. T., & Le Page, B. H. (2001). Interaction between optical fibre sensors and matrix cracks in cross-ply GRP laminates—part 1: passive optical fibres. Composites Science and Technology, 61(13), 1863–1869. https://doi.org/https://doi.org/10.1016/S0266-3538(01)00086-0
- Bilotta, A., Ceroni, F., Lignola, G. P., & Prota, A. (2017). Use of DIC technique for investigating the behaviour of FRCM materials for strengthening masonry elements. Composites Part B: Engineering, 129, 251–270. https://doi.org/https://doi.org/10.1016/J.COMPOSITESB.2017.05.075
- Bilotta, A., Ceroni, F., Nigro, E., & Pecce, M. (2017). Experimental tests on FRCM strengthening systems for tuff masonry elements. Construction and Building Materials, 138, 114–133. https://doi.org/https://doi.org/10.1016/J.CONBUILDMAT.2017.01.124
- BS EN 196-1. (2005). Methods of testing cement–Part 1: Determination of strength European Committee for standardization.
- Caggegi, C., Sciuto, D., & Cuomo, M. (2018). Experimental study on effective bond length of basalt textile reinforced mortar strengthening system: Contributions of digital image correlation. Measurement, 129, 119–127. https://doi.org/https://doi.org/10.1016/J.MEASUREMENT.2018.07.003
- Chen, Z., Zheng, D., Shen, J., Qiu, J., & Liu, Y. (2019). Research on distributed optical-fiber monitoring of biaxial-bending structural deformations. Measurement, 140, 462–471. https://doi.org/https://doi.org/10.1016/j.measurement.2019.04.031
- Colombo, I. G., Magri, A., Zani, G., Colombo, M., & di Prisco, M. (2013). Erratum to: Textile Reinforced Concrete: experimental investigation on design parameters. Materials and Structures, 46(11), 1953–1971. Springer Netherlands, https://doi.org/https://doi.org/10.1617/s11527-013-0023-7
- Contamine, R., Si Larbi, A., & Hamelin, P. (2011). Contribution to direct tensile testing of textile reinforced concrete (TRC) composites. Materials Science and Engineering: A, 528(29-30), 8589–8598. https://doi.org/https://doi.org/10.1016/J.MSEA.2011.08.009
- Cuypers, H., & Wastiels, J. (2006). Stochastic matrix-cracking model for textile reinforced cementitious composites under tensile loading. Materials and Structures, 39(8), 777–786. https://doi.org/https://doi.org/10.1617/s11527-005-9053-0
- Das, S., & Saha, P. (2018). A review of some advanced sensors used for health diagnosis of civil engineering structures. Measurement, 129, 68–90. https://doi.org/https://doi.org/10.1016/J.MEASUREMENT.2018.07.008
- De Baere, I., Luyckx, G., Voet, E., Van Paepegem, W., & Degrieck, J. (2009). On the feasibility of optical fibre sensors for strain monitoring in thermoplastic composites under fatigue loading conditions. Optics and Lasers in Engineering, 47(3-4), 403–411. https://doi.org/https://doi.org/10.1016/J.OPTLASENG.2008.01.001
- Ferrara, G., Coppola, B., Di Maio, L., Incarnato, L., & Martinelli, E. (2019). Tensile strength of flax fabrics to be used as reinforcement in cement-based composites: experimental tests under different environmental exposures. Composites Part B: Engineering, 168, 511–523. https://doi.org/https://doi.org/10.1016/J.COMPOSITESB.2019.03.062
- Hawkins, W., Orr, J., Ibell, T., & Shepherd, P. (2018). An Analytical Failure Envelope for the Design of Textile Reinforced Concrete Shells. Structures, 15, 56–65. Elsevier, https://doi.org/https://doi.org/10.1016/J.ISTRUC.2018.06.001
- Henault, J.-M. (2013). Approche méthodologique pour l’évluation des performances et de la durabilité des systèmes de mesure réparties de déformation: application à un câble à fibre optique noyé dans le béton. Université Paris-Est-France.
- Huang, M., Zhou, Z., Huang, Y., & Ou, J. (2013). A distributed self-sensing FRP anchor rod with built-in optical fiber sensor. Measurement: Journal of the International Measurement Confederation, 46(4), 1363–1370. https://doi.org/https://doi.org/10.1016/j.measurement.2012.12.012
- Kesavan, K., Ravisankar, K., Parivallal, S., Sreeshylam, P., & Sridhar, S. (2010). Experimental studies on fiber optic sensors embedded in concrete. Measurement, 43(2), 157–163. https://doi.org/https://doi.org/10.1016/J.MEASUREMENT.2009.08.010
- Krevaikas, D. T. (2019). Experimental study on carbon fiber textile reinforced mortar system as a means for confinement of masonry columns. Construction and Building Materials, 208, 723–733. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2019.03.033
- Li, Q., Li, G., Wang, G., & Yuan, L. (2004). CTOD measurement for cracks in concrete by fiber optic sensors. Optics and Lasers in Engineering, 42(4), 377–388. https://doi.org/https://doi.org/10.1016/J.OPTLASENG.2004.03.002
- Li, Q., Li, G., & Yuan, L. (2004). Calibration of embedded fiber optic sensor in concrete under biaxial compression. Measurement, 35(3), 303–310. https://doi.org/https://doi.org/10.1016/J.MEASUREMENT.2003.12.003
- Mobasher, B., Peled, A., & Pahilajani, J. (2007). Distributed cracking and stiffness degradation in fabric-cement composites. Materials and Structures, 39(3), 317–331. https://doi.org/https://doi.org/10.1007/s11527-005-9005-8
- Ombres, L., & Verre, S. (2018). Masonry columns strengthened with Steel Fabric Reinforced Cementitious Matrix (S-FRCM) jackets: Experimental and numerical analysis. Measurement, 127, 238–245. https://doi.org/https://doi.org/10.1016/J.MEASUREMENT.2018.05.114
- Saidi, M., & Gabor, A. (2019a). Use of distributed optical fibre as a strain sensor in textile reinforced cementitious matrix composites. Measurement, 140, 323–333. https://doi.org/https://doi.org/10.1016/j.measurement.2019.03.047
- Saidi, M., & Gabor, A. (2019b). Adaptation of the strain measurement in textile reinforced cementitious matrix composites by distributed optical fibre and 2D digital image correlation. Strain, 56(1), e12335. https://doi.org/https://doi.org/10.1111/str.12335
- Saidi, M., & Gabor, A. (2020). Experimental analysis of the tensile behaviour of textile reinforced cementitious matrix composites using distributed fibre optic sensing (DFOS) technology. Construction and Building Materials, 230, 117027. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2019.117027
- Skontorp, A. (2000). Effect of embedded optical fibers on the structural integrity of composites.
- Soller, B., Gifford, D., Wolfe, M., & Froggatt, M. (2005). High resolution optical frequency domain reflectometry for characterization of components and assemblies. Optics Express, 13(2), 666–674. https://doi.org/https://doi.org/10.1364/OPEX.13.000666
- Suryanto, B., Takaoka, H., McCater, W. J., Saraireh, D., & Taha, H. (2018). Impedance measurements on an engineered cementitious composite: A critical evaluation of testing protocols. Measurement: Journal of the International Measurement Confederation, 129, 445–456. https://doi.org/https://doi.org/10.1016/j.measurement.2018.07.066
- Tekieli, M., De Santis, S., de Felice, G., Kwiecień, A., & Roscini, F. (2017). Application of Digital Image Correlation to composite reinforcements testing. Composite Structures, 160, 670–688. https://doi.org/https://doi.org/10.1016/j.compstruct.2016.10.096
- Teomete, E. (2015). Measurement of crack length sensitivity and strain gage factor of carbon fiber reinforced cement matrix composites. Measurement: Journal of the International Measurement Confederation, 74, 21–30. https://doi.org/https://doi.org/10.1016/j.measurement.2015.07.021
- Wang, X., Lam, C. C., & Iu, V. P. (2019). Comparison of different types of TRM composites for strengthening masonry panels. Construction and Building Materials, 219, 184–194. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2019.05.179
- Wang, Q., & Liu, Y. (2018). Review of optical fiber bending/curvature sensor. Measurement, 130, 161–176. https://doi.org/https://doi.org/10.1016/J.MEASUREMENT.2018.07.068
- Weitsman, Y., & Zhu, H. (1993). Multi-fracture of ceramic composites. Journal of the Mechanics and Physics of Solids, 41(2), 351–388. https://doi.org/https://doi.org/10.1016/0022-5096(93)90012-5
- Woods, J. E., Lau, D. T., Bao, X., & Li, W. (2017). Measuring strain fields in FRP strengthened RC shear walls using a distributed fiber optic sensor. Engineering Structures, 152, 359–369. https://doi.org/https://doi.org/10.1016/J.ENGSTRUCT.2017.09.034
- Xu, Y., Leung, C. K. Y., Tong, P., Yi, J., & Lee, S. K. L. (2005). Interfacial debonding detection in bonded repair with a fiber optical interferometric sensor. Composites Science and Technology, 65(9), 1428–1435. https://doi.org/https://doi.org/10.1016/J.COMPSCITECH.2004.12.014
- Zhandarov, S., & Mäder, E. (2005). Characterization of fiber/matrix interface strength: applicability of different tests, approaches and parameters. Composites Science and Technology, 65(1), 149–160. https://doi.org/https://doi.org/10.1016/J.COMPSCITECH.2004.07.003
- Zok, F. W., & Spearing, S. M. (1992). Matrix crack spacing in brittle matrix composites. Acta Metallurgica Et Materialia. Pergamon, 40(8), 2033–2043. https://doi.org/https://doi.org/10.1016/0956-7151(92)90189-L