References
- Adam, A. (2009). Strength and durability properties of alkali activated slag and fly ash-based geopolymer concrete [MSc thesis]. RMIT University.
- Aguirre-Guerrero, A. M. & Mejía de Gutiérrez, R. (2018). 13 - Assessment of corrosion protection methods for reinforced concrete. In F. Pacheco-Torgal, R. E. Melchers, X. Shi, N. D. Belie, K. V. Tittelboom, & A. Sáez (Eds.), Eco-efficient repair and rehabilitation concrete infrastructures (pp. 315–353). Woodhead Publishing. https://doi.org/https://doi.org/10.1016/B978-0-08-102181-1.00013-7.
- Ahmed, S., Saurikhia, A., Haleem, A., & Gangopadhyay, S. (2016). Geographical spread of fly ash generation and residual potential for its utilization In India. International Journal of Innovative Research and Review ISSN, 4(1), 8–19. https://cibtech.org/J-Innovative-Research-Review/Publications/2016/VOL-4-NO-1/02-JIRR-002-SIRAJUDDIN-GEOGRAPHICAL.pdf
- Al-Kutti, W., Nasir, M., Megat Johari, M. A., Islam, A., Manda, A. A., & Blaisi, N. I. (2018). An overview and experimental study on hybrid binders containing date palm ash, fly ash, OPC and activator composites. Construction and Building Materials, 159, 567–577. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2017.11.017
- Al-Otaibi, S. (2008). Durability of concrete incorporating GGBS activated by water-glass. Construction and Building Materials, 22(10), 2059–2067. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2007.07.023
- Andrade, C. (2020). Evaluation of the degree of carbonation of concretes in three environments. Construction and Building Materials, 230, 116804. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2019.116804
- Andrade, C., & Alonso, C. (2004). Test methods for on-site corrosion rate measurement of steel reinforcement in concrete by means of the polarization resistance method. Materials and Structures, 37(9), 623–643. https://doi.org/https://doi.org/10.1007/BF02483292
- Angulo-Ramirez, D. E., Gutiérrez, R. d., Valencia-Saavedra, W. G., Medeiros, M. d., & Hoppe-Filho, J. (2019). Carbonation of hybrid concrete with high blast furnace slag content and its impact on structural steel corrosion. Materiales de Construcción, 69(333), 182. https://doi.org/https://doi.org/10.3989/mc.2019.05418
- Arbi, K., Nedeljković, M., Zuo, Y., & Ye, G. (2016). A review on the durability of alkali-activated fly ash/slag systems: Advances, issues, and perspectives. Industrial & Engineering Chemistry Research, 55(19), 5439–5453. https://doi.org/https://doi.org/10.1021/acs.iecr.6b00559
- Babaee, A., & Castel, A. (2016). Chloride-induced corrosion of reinforcement in low-calcium fly ash-based geopolymer concrete. Cement and Concrete Research, 88, 96–107. https://doi.org/https://doi.org/10.1016/j.cemconres.2016.05.012
- Babaee, M., Khan, M. S. H., & Castel, A. (2018). Passivity of embedded reinforcement in carbonated low-calcium fly ash-based geopolymer concrete. Cement and Concrete Composites, 85, 32–43. https://doi.org/https://doi.org/10.1016/j.cemconcomp.2017.10.001
- Balcikanli, M., & Ozbay, E. (2016). Optimum design of alkali activated slag concretes for the low oxygen/chloride ion permeability and thermal conductivity. Composites Part B: Engineering, 91, 243–256. https://doi.org/https://doi.org/10.1016/j.compositesb.2016.01.047
- Bartoňová, L. (2015). Unburned carbon from coal combustion ash: An overview. Fuel Processing Technology, 134, 136–158. https://doi.org/https://doi.org/10.1016/j.fuproc.2015.01.028
- Bary, B., & Sellier, A. (2004). Coupled moisture—carbon dioxide–calcium transfer model for carbonation of concrete. Cement and Concrete Research, 34(10), 1859–1872. https://doi.org/https://doi.org/10.1016/j.cemconres.2004.01.025
- Basheer, L., Kropp, J., & Cleland, D. J. (2001). Assessment of the durability of concrete from its permeation properties: A review. Construction and Building Materials, 15(2–3), 93–103. https://doi.org/https://doi.org/10.1016/S0950-0618(00)00058-1
- Bastidas, D. M., Fernández-Jiménez, A., Palomo, A., & González, J. A. (2008). A study on the passive state stability of steel embedded in activated fly ash mortars. Corrosion Science, 50(4), 1058–1065. . https://doi.org/https://doi.org/10.1016/j.corsci.2007.11.016
- Behfarnia, K., & Rostami, M. (2017). An assessment on parameters affecting the carbonation of alkali-activated slag concrete. Journal of Cleaner Production, 157, 1–9. https://doi.org/https://doi.org/10.1016/j.jclepro.2017.04.097
- Bernal, S. A., & Provis, J. L. (2014). Durability of alkali-activated materials: Progress and perspectives. Journal of the American Ceramic Society, 97(4), 997–1008. https://doi.org/https://doi.org/10.1111/jace.12831
- Bernal, S. A., de Gutierrez, R. M., Provis, J. L., & Rose, V. (2010). Effect of silicate modulus and metakaolin incorporation on the carbonation of alkali silicate-activated slags. Cement and Concrete Research, 40(6), 898–907. https://doi.org/https://doi.org/10.1016/j.cemconres.2010.02.003
- Bernal, S. A., Nicolas, R. S., Provis, J. L., Gutiérrez, R. d., Deventer, J. S. J. & van, (2014). Natural carbonation of aged alkali-activated slag concretes. Materials and Structures, 47(4), 693–707. https://doi.org/https://doi.org/10.1617/s11527-013-0089-2
- Bernal, S. A., Provis, J. L., Brice, D. G., Kilcullen, A., Duxson, P., & van Deventer, J. (2012). Accelerated carbonation testing of alkali-activated binders significantly underestimates service life: The role of pore solution chemistry. Cement and Concrete Research, 42(10), 1317–1326. https://doi.org/https://doi.org/10.1016/j.cemconres.2012.07.002
- Bernal, S. A., Provis, J. L., Mejía de Gutiérrez, R., & van Deventer, J. S. J. (2015). Accelerated carbonation testing of alkali-activated slag/metakaolin blended concretes: Effect of exposure conditions. Materials and Structures, 48(3), 653–669. https://doi.org/https://doi.org/10.1617/s11527-014-0289-4
- Bernal, S. A., Provis, J. L., Walkley, B., San Nicolas, R., Gehman, J. D., Brice, D. G., Kilcullen, A. R., Duxson, P., & van Deventer, J. S. J. (2013). Gel nanostructure in alkali-activated binders based on slag and fly ash, and effects of accelerated carbonation. Cement and Concrete Research, 53, 127–144. https://doi.org/https://doi.org/10.1016/j.cemconres.2013.06.007
- Bernal, S. A., Rodríguez, E., de Gutiérrez, R. M., Rose, V., Puertas, F., Delvasto, S. (2008). Carbonation behavior of mortar produced by alkali-activation of a granulatedblast furnace slag. In Proceedings of the 23rd International Conference Solid Waste Technology and Management (pp. 945–956). Widener University Philadelphia.
- Bilim, C., & Atiş, C. D. (2017). Carbonation resistance of slag mortars activated by different alkali activators. Turkish Journal of Engineering, 1(1), 1–4. https://doi.org/https://doi.org/10.31127/tuje.315227
- Criado, M., Palomo, A., & Fernández-Jiménez, A. (2005). Alkali activation of fly ashes. Part 1: Effect of curing conditions on the carbonation of the reaction products. Fuel, 84(16), 2048–2054. https://doi.org/https://doi.org/10.1016/j.fuel.2005.03.030
- Criado, M., & Provis, J. L. (2018). Alkali activated slag mortars provide high resistance to chloride-induced corrosion of steel. Frontiers in Materials, 5, 34.
- Damtoft, J. S., Lukasik, J., Herfort, D., Sorrentino, D., & Gartner, E. M. (2008). Sustainable development and climate change initiatives. Cement and Concrete Research, 38(2), 115–127. https://doi.org/https://doi.org/10.1016/j.cemconres.2007.09.008
- Davidovits, J. (2013). Geopolymer cement (Geopolymer Science and Technics Technical Paper 21; pp. 1–11). Geopolymer Institute Library.
- Duffó, G. S., Morris, W., Raspini, I., & Saragovi, C. (2004). A study of steel rebars embedded in concrete during 65 years. Corrosion Science, 46(9), 2143–2157. https://doi.org/https://doi.org/10.1016/j.corsci.2004.01.006
- El-Gamal, S. M. A., & Selim, F. A. (2017). Utilization of some industrial wastes for eco-friendly cement production. Sustainable Materials and Technologies, 12, 9–17. https://doi.org/https://doi.org/10.1016/j.susmat.2017.03.001
- Fernández Bertos, M., Simons, S. J. R., Hills, C. D., & Carey, P. J. (2004). A review of accelerated carbonation technology in the treatment of cement-based materials and sequestration of CO2. Journal of Hazardous Materials, 112(3), 193–205. https://doi.org/https://doi.org/10.1016/j.jhazmat.2004.04.019
- Fernández-Jiménez, A., Miranda, J. M., González, J. A., & Palomo, A. (2010). Steel passive state stability in activated fly ash mortars. Materiales de Construcción, 60(300), 51–65. https://doi.org/https://doi.org/10.3989/mc.2010.53909
- Fernández-Jiménez, A., & Palomo, A. (2003). Characterisation of fly ashes. Potential reactivity as alkaline cements. Fuel, 82(18), 2259–2265. https://doi.org/https://doi.org/10.1016/S0016-2361(03)00194-7
- Fernández-Jiménez, A., & Palomo, A. (2005). Composition and microstructure of alkali activated fly ash binder: Effect of the activator. Cement and Concrete Research, 35(10), 1984–1992. https://doi.org/https://doi.org/10.1016/j.cemconres.2005.03.003
- Ferreira. (2004). Relationship between results of accelerated and natural carbonation in various concretes. In International RILEM conference on the use of recycled materials in building and structures (pp. 988–997). RILEM Publications SARL.
- Gao, X., Yu, Q. L., & Brouwers, H. (2015). Reaction kinetics, gel character and strength of ambient temperature cured alkali activated slag–fly ash blends. Construction and Building Materials, 80, 105–115. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2015.01.065
- Garcia, V., François, R., Carcasses, M., & Gegout, P. (2014). Potential measurement to determine the chloride threshold concentration that initiates corrosion of reinforcing steel bar in slag concretes. Materials and Structures, 47(9), 1483–1499. https://doi.org/https://doi.org/10.1617/s11527-013-0130-5
- García-Lodeiro, I., Fernández-Jiménez, A., & Palomo, A. (2013). Variation in hybrid cements over time. Alkaline activation of fly ash–Portland cement blends. Cement and Concrete Research, 52, 112–122. . https://doi.org/https://doi.org/10.1016/j.cemconres.2013.03.022
- Glasser, F. P. (2001). Mineralogical aspects of cement in radioactive waste disposal. Mineralogical Magazine, 65(5), 621–633. https://doi.org/https://doi.org/10.1180/002646101317018442
- Gollakota, A. R., Volli, V., & Shu, C.-M. (2019). Progressive utilisation prospects of coal fly ash: A review. The Science of the Total Environment, 672, 951–989. https://doi.org/https://doi.org/10.1016/j.scitotenv.2019.03.337
- Görhan, G., Aslaner, R., & Şinik, O. (2016). The effect of curing on the properties of metakaolin and fly ash-based geopolymer paste. Composites Part B: Engineering, 97, 329–335. https://doi.org/https://doi.org/10.1016/j.compositesb.2016.05.019
- Hassan, A., Arif, M., & Shariq, M. (2019). Use of geopolymer concrete for a cleaner and sustainable environment – A review of mechanical properties and microstructure. Journal of Cleaner Production, 223, 704–728. https://doi.org/https://doi.org/10.1016/j.jclepro.2019.03.051
- Hobbs, D. W. (2001). Concrete deterioration: Causes, diagnosis, and minimising risk. International Materials Reviews, 46(3), 117–144. https://doi.org/https://doi.org/10.1179/095066001101528420
- Hossain, M. M., Karim, M. R., Hossain, M. K., Islam, M. N., & Zain, M. (2015). Durability of mortar and concrete containing alkali-activated binder with pozzolans: A review. Construction and Building Materials, 93, 95–109. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2015.05.094
- Huseien, G. F., & Shah, K. W. (2020). Durability and life cycle evaluation of self-compacting concrete containing fly ash as GBFS replacement with alkali activation. Construction and Building Materials, 235, 117458. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2019.117458
- Ismail, I., Bernal, S. A., Provis, J. L., San Nicolas, R., Hamdan, S., & van Deventer, J. (2014). Modification of phase evolution in alkali-activated blast furnace slag by the incorporation of fly ash. Cement and Concrete Composites, 45, 125–135. https://doi.org/https://doi.org/10.1016/j.cemconcomp.2013.09.006
- Kaja, A. M., Lazaro, A., & Yu, Q. L. (2018). Effects of Portland cement on activation mechanism of class F fly ash geopolymer cured under ambient conditions. Construction and Building Materials, 189, 1113–1123. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2018.09.065
- Khan, M. S. H., Castel, A., & Noushini, A. (2016). Carbonation of a low-calcium fly ash geopolymer concrete. In Proceedings of the 9th International Concrete Conference. University of New South Wales.
- Lee, N. K., Koh, K. T., Kim, M. O., An, G. H., & Ryu, G. S. (2017). Physicochemical changes caused by reactive MgO in alkali-activated fly ash/slag blends under accelerated carbonation. Ceramics International, 43(15), 12490–12496. https://doi.org/https://doi.org/10.1016/j.ceramint.2017.06.119
- Li, C., Gong, X. Z., Cui, S. P., Wang, Z. H., Zheng, Y., & Chi, B. C. (2011). CO2 emissions due to cement manufacture. Materials Science Forum, 685, 181–187. https://doi.org/https://doi.org/10.4028/www.scientific.net/MSF.685.181
- Li, Z., & Li, S. (2018). Carbonation resistance of fly ash and blast furnace slag based geopolymer concrete. Construction and Building Materials, 163, 668–680. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2017.12.127
- Ma, Y., Yang, X., Hu, J., Zhang, Z., & Wang, H. (2019). Accurate determination of the “time-zero” of autogenous shrinkage in alkali-activated fly ash/slag system. Composites Part B: Engineering, 177, 107367. https://doi.org/https://doi.org/10.1016/j.compositesb.2019.107367
- Messina, F., & Colangelo, R., C. (2018). Alkali activated waste fly ash as sustainable composite: Influence of curing and pozzolanic admixtures on the early-age physico-mechanical properties and residual strength after exposure at elevated temperature. Composited Part B: Engineering, 132, 161–169. https://doi.org/https://doi.org/10.1016/j.compositesb.2017.08.012
- Miranda, J. M., Fernández-Jiménez, A., González, J. A., & Palomo, A. (2005). Corrosion resistance in activated fly ash mortars. Cement and Concrete Research, 35(6), 1210–1217. https://doi.org/https://doi.org/10.1016/j.cemconres.2004.07.030
- Nedeljković, M., Ghiassi, B., Melzer, S., Kooij, C., van der Laan, S., & Ye, G. (2018). CO2 binding capacity of alkali-activated fly ash and slag pastes. Ceramics International, 44(16), 19646–19660. https://doi.org/https://doi.org/10.1016/j.ceramint.2018.07.216
- Nedeljković, M., Ghiassi, B., van der Laan, S., Li, Z., & Ye, G. (2019). Effect of curing conditions on the pore solution and carbonation resistance of alkali-activated fly ash and slag pastes. Cement and Concrete Research, 116, 146–158. https://doi.org/https://doi.org/10.1016/j.cemconres.2018.11.011
- Nedeljković, M., Šavija, B., Zuo, Y., Luković, M., & Ye, G. (2018). Effect of natural carbonation on the pore structure and elastic modulus of the alkali-activated fly ash and slag pastes. Construction and Building Materials, 161, 687–704. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2017.12.005
- Nedeljković, M., Zuo, Y., Arbi, K., Ye, G. (2018). Natural carbonation of alkali-activated fly ash and slag pastes. In High Tech Concrete: Where Technology and Engineering Meet (pp. 2213–2223). Springer. https://doi.org/https://doi.org/10.1007/978-3-319-59471-2_253.
- Okoye, F. N., Prakash, S., & Singh, N. B. (2017). Durability of fly ash based geopolymer concrete in the presence of silica fume. Journal of Cleaner Production, 149, 1062–1067. https://doi.org/https://doi.org/10.1016/j.jclepro.2017.02.176
- Otieno, M., Ikotun, J., & Ballim, Y. (2020). Experimental investigations on the effect of concrete quality, exposure conditions and duration of initial moist curing on carbonation rate in concretes exposed to urban, inland environment. Construction and Building Materials, 246, 118443. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2020.118443
- Palacios, M., & Puertas, F. (2006). Effect of carbonation on alkali-activated slag paste. Journal of the American Ceramic Society, 89(10), 3211–3221. https://doi.org/https://doi.org/10.1111/j.1551-2916.2006.01214.x
- Palomo, A., Fernández-Jiménez, A., Kovalchuk, G., Ordoñez, L. M., & Naranjo, M. C. (2007). Opc-fly ash cementitious systems: Study of gel binders produced during alkaline hydration. Journal of Materials Science, 42(9), 2958–2966. https://doi.org/https://doi.org/10.1007/s10853-006-0585-7
- Palomo, A., Maltseva, O., Garcia-Lodeiro, I., & Fernández-Jiménez, A. (2013). Cimenturi hibride alcaline. Partea a II-a: Factorul clincher*/hybrid alkaline cements. Part II: The clinker factor. Revista Romana de Materiale, 43, 74.
- Pasupathy, K., Berndt, M., Castel, A., Sanjayan, J., & Pathmanathan, R. (2016). Carbonation of a blended slag-fly ash geopolymer concrete in field conditions after 8years. Construction and Building Materials, 125, 661–669. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2016.08.078
- Peng, J. X., Huang, L., Zhao, Y. B., Chen, P., Zeng, L., & Zheng, W. (2012). Modeling of carbon dioxide measurement on cement plants. Advanced Materials Research, 610–613, 2120–2128. https://doi.org/https://doi.org/10.4028/www.scientific.net/AMR.610-613.2120
- Peter, M. A., Muntean, A., Meier, S. A., & Böhm, M. (2008). Competition of several carbonation reactions in concrete: A parametric study. Cement and Concrete Research, 38(12), 1385–1393. https://doi.org/https://doi.org/10.1016/j.cemconres.2008.09.003
- Poonguzhali, A., Shaikh, H., Dayal, R. K., & Khatak, H. S. (2010). A review on degradation mechanism and life estimation of civil structures. Corrosion Reviews, 26, 215–294. https://doi.org/https://doi.org/10.1515/corrrev.2008.215.
- Provis, J. L. (2014). Geopolymers and other alkali activated materials: Why, how, and what?. Materials and Structures, 47(1–2), 11–25. https://doi.org/https://doi.org/10.1617/s11527-013-0211-5
- Provis, J. L., Palomo, A., & Shi, C. (2015). Advances in understanding alkali-activated materials. Cement and Concrete Research, 78, 110–125. https://doi.org/https://doi.org/10.1016/j.cemconres.2015.04.013
- Puertas, F., Palacios, M., & Vázquez, T. (2006). Carbonation process of alkali-activated slag mortars. Journal of Materials Science, 41(10), 3071–3082. https://doi.org/https://doi.org/10.1007/s10853-005-1821-2
- Rashad, A. M. (2019). Insulating and fire-resistant behaviour of metakaolin and fly ash geopolymer mortars. Proceedings of the Institution of Civil Engineers – Construction Materials, 172(1), 37–44. https://doi.org/https://doi.org/10.1680/jcoma.17.00016.
- Robayo-Salazar, R. A., Aguirre-Guerrero, A. M., & Mejía de Gutiérrez, R. (2020). Carbonation-induced corrosion of alkali-activated binary concrete based on natural volcanic pozzolan. Construction and Building Materials, 232, 117189. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2019.117189
- Sagoe, C. K., & Weng, L. (2007). Dissolution processes, hydrolysis and condensation reactions during geopolymer synthesis: Part II. High Si/Al ratio systems. Journal of Materials Science, 42(9), 3007–3014. https://doi.org/https://doi.org/10.1007/s10853-006-0818-9
- Shekhovtsova, J., Kovtun, M., & Kearsley, E. P. (2015). Evaluation of short- and longterm properties of heat-cured alkali-activated fly ash concrete. Magazine of Concrete Research, 67(16), 897–905. https://doi.org/https://doi.org/10.1680/macr.14.00377.
- Shi, C., Fernandez-Jiménez, A., & Palomo, A. (2011). New cements for the 21st century: The pursuit of an alternative to Portland cement. Cement and Concrete Research, 41(7), 750–763. https://doi.org/https://doi.org/10.1016/j.cemconres.2011.03.016
- Song, K.-I., Song, J.-K., Lee, B. Y., & Yang, K.-H. (2014). Carbonation characteristics of alkali-activated blast-furnace slag mortar. Advances in Materials Science and Engineering, 2014, 1–11. https://doi.org/https://doi.org/10.1155/2014/326458
- Sufian Badar, M., Kupwade-Patil, K., Bernal, S. A., Provis, J. L., & Allouche, E. N. (2014). Corrosion of steel bars induced by accelerated carbonation in low and high calcium fly ash geopolymer concretes. Construction and Building Materials, 61, 79–89. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2014.03.015
- Tennakoon, C., Shayan, A., Sanjayan, J. G., & Xu, A. (2017). Chloride ingress and steel corrosion in geopolymer concrete based on long term tests. Materials and Design, 116, 287–299. https://doi.org/https://doi.org/10.1016/j.matdes.2016.12.030
- Topçu, İB., Toprak, M. U., & Uygunoğlu, T. (2014). Durability and microstructure characteristics of alkali activated coal bottom ash geopolymer cement. Journal of Cleaner Production, 81, 211–217. https://doi.org/https://doi.org/10.1016/j.jclepro.2014.06.037
- Valencia, W., Daniela Eugenia, A., & de Gutiérrez Ruby, M. (2016). Fly ash slag geopolymer concrete: resistance to sodium and magnesium sulfate attack. Journal of Materials in Civil Engineering, 28(12), 04016148. https://doi.org/https://doi.org/10.061/(ASCE)MT.1943-5533.0001618. https://doi.org/https://doi.org/10.1061/(ASCE)MT.1943-5533.0001618
- Valencia Saavedra, W. G., & Mejía de Gutiérrez, R. (2017). Performance of geopolymer concrete composed of fly ash after exposure to elevated temperatures. Construction and Building Materials, 154, 229–235. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2017.07.208
- Valencia-Saavedra, W., Mejía de Gutiérrez, R., & Gordillo, M. (2018). Geopolymeric concretes based on fly ash with high unburned content. Construction and Building Materials, 165, 697–706. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2018.01.071
- Van Deventer, J. S. J., Provis, J. L., & Duxson, P. (2012). Technical and commercial progress in the adoption of geopolymer cement. Minerals Engineering, 29, 89–104. https://doi.org/https://doi.org/10.1016/j.mineng.2011.09.009
- Visser, J. (2014). Influence of the carbon dioxide concentration on the resistance to carbonation of concrete. Construction and Building Materials, 67, 8–13. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2013.11.005
- Wang, W., Chen, H., Li, X., & Zhu, Z. (2017). Corrosion behavior of steel bars immersed in simulated pore solutions of alkali-activated slag mortar. Construction and Building Materials, 143, 289–297. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2017.03.132
- Xie, J., Wang, J., Rao, R., Wang, C., & Fang, C. (2019). Effects of combined usage of GGBS and fly ash on workability and mechanical properties of alkali activated geopolymer concrete with recycled aggregate. Composites Part B: Engineering, 164, 179–190. https://doi.org/https://doi.org/10.1016/j.compositesb.2018.11.067
- Zhang, J., Shi, C., Li, N., Zhang, Z., & Farzadnia, N. (2018). 12 - Carbon dioxide sequestration by alkali-activated materials. In F. Pacheco-Torgal, C. Shi, & A. P. Sanchez (Eds.), Carbon dioxide sequestration in cementitious construction materials (pp. 279–298). Woodhead Publishing. https://doi.org/https://doi.org/10.1016/B978-0-08-102444-7.00012-5.
- Zhao, X., Liu, C., Wang, L., Zuo, L., Zhu, Q., & Ma, W. (2019). Physical and mechanical properties and micro characteristics of fly ash-based geopolymers incorporating soda residue. Cement and Concrete Composites, 98, 125–136. https://doi.org/https://doi.org/10.1016/j.cemconcomp.2019.02.009
- Zhu, H., Zhang, Z., Zhu, Y., & Tian, L. (2014). Durability of alkali-activated fly ash concrete: Chloride penetration in pastes and mortars. Construction and Building Materials, 65, 51–59. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2014.04.110
- Zhuang, X. Y., Chen, L., Komarneni, S., Zhou, C. H., Tong, D. S., Yang, H. M., Yu, W. H., & Wang, H. (2016). Fly ash-based geopolymer: Clean production, properties and applications. Journal of Cleaner Production, 125, 253–267. https://doi.org/https://doi.org/10.1016/j.jclepro.2016.03.019