References
- Barla, G. (2000). Lessons learnt from the excavation of a large diameter TBM tunnel in complex hydrogeological conditions. GeoEng2000, International Conference on Geotechnical & Geological Engineering, pp. 938–996.
- Barla, G., Debernardi, D., & Sterpi, D. (2012). Time-dependent modeling of tunnels in squeezing conditions. International Journal of Geomechanics, 12(6), 697–710. https://doi.org/https://doi.org/10.1061/(ASCE)GM.1943-5622.0000163
- Barnes, P., Hejazi, R., & Karrech, A. (2018). Instability of mechanically lined pipelines under large deformation. Finite Elements in Analysis and Design, 146, 62–69. https://doi.org/https://doi.org/10.1016/j.finel.2018.04.006
- Bobet, A. (2011). Lined circular tunnels in elastic transversely anisotropic rock at depth. Rock Mechanics and Rock Engineering, 44(2), 149–167. https://doi.org/https://doi.org/10.1007/s00603-010-0118-1
- Cardarelli, E., Marrone, C., & Orlando, L. (2003). Evaluation of tunnel stability using integrated geophysical methods. Journal of Applied Geophysics, 52(2–3), 93–102. https://doi.org/https://doi.org/10.1016/S0926-9851(02)00242-2
- Carranza-Torres, C. (2004). Elasto-plastic solution of tunnel problems using the generalized form of the hoek-brown failure criterion. International Journal of Rock Mechanics and Mining Sciences, 41(SUPPL. 1), 1–11. https://doi.org/https://doi.org/10.1016/j.ijrmms.2004.03.111
- Carranza-Torres, C., & Fairhurst, C. (2000). Application of the convergence-confinement method of tunnel design to rock masses that satisfy the hoek-brown failure criterion. Tunnelling and Underground Space Technology, 15(2), 187–213. https://doi.org/https://doi.org/10.1016/S0886-7798(00)00046-8
- Detournay, E., & Fairhurst, C. (1987). Two-dimensional elastoplastic analysis of a long, cylindrical cavity under non-hydrostatic loading. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 24(4), 197–211. https://doi.org/https://doi.org/10.1016/0148-9062(87)90175-6
- Do, N. A., Dias, D., Oreste, P., & Djeran-Maigre, I. (2014). The behaviour of the segmental tunnel lining studied by the hyperstatic reaction method. European Journal of Environmental and Civil Engineering, 18(4), 1–510. https://doi.org/https://doi.org/10.1080/19648189.2013.872583
- Dong, X., Karrech, A., Basarir, H., Elchalakani, M. (2018, June 17–20). Extended finite element modelling of fracture propagation during in-situ rock mass alteration [Paper presentation]. 52nd US Rock Mechanics/Geomechanics Symposium, Seattle, WA, USA.
- Dong, X., Karrech, A., Basarir, H., Elchalakani, M., & Qi, C. (2018). Analytical solution of energy redistribution in rectangular openings upon in-situ rock mass alteration. International Journal of Rock Mechanics and Mining Sciences, 106, 74–83. https://doi.org/https://doi.org/10.1016/j.ijrmms.2018.04.014
- Dong, X., Karrech, A., Basarir, H., Elchalakani, M., & Seibi, A. (2019). Energy dissipation and storage in underground mining operations. Rock Mechanics and Rock Engineering, 52(1), 229–245. https://doi.org/https://doi.org/10.1007/s00603-018-1534-x
- Dong, X., Karrech, A., Qi, C., Elchalakani, M., & Basarir, H. (2019). Analytical solution for stress distribution around deep lined pressure tunnels under the water table. International Journal of Rock Mechanics and Mining Sciences, 123(104), 124. https://doi.org/https://doi.org/10.1016/j.ijrmms.2019.104124
- Dong, X., Karrech, A., Elchalakani, M., Qi, C., & Manca, M. (2020). 3D bolted cohesive element for the modelling of bolt-reinforced rough rock-shotcrete interfaces. Computers and Geotechnics, 125(103), 659. https://doi.org/https://doi.org/10.1016/j.compgeo.2020.103659
- Einstein, H. H., & Schwartz, C. W. (1979). Simplified analysis for tunnel supports. Journal of Geotechnical and Geoenvironmental Engineering, 105(GT4), 499–518. http://worldcat.org/oclc/3519342
- Gaede, O., Karrech, A., & Regenauer-Lieb, K. (2013). Anisotropic damage mechanics as a novel approach to improve pre-and post-failure borehole stability analysis. Geophysical Journal International, 193(3), 1095–1109. https://doi.org/https://doi.org/10.1093/gji/ggt045
- Genikomsou, A. S., & Polak, M. A. (2015). Finite element analysis of punching shear of concrete slabs using damaged plasticity model in ABAQUS. Engineering Structures, 98, 38–48. https://doi.org/https://doi.org/10.1016/j.engstruct.2015.04.016
- Helwany, S. (2007). Applied soil mechanics with ABAQUS applications. John Wiley & Sons.
- Hoek, E., & Martin, C. (2014). Fracture initiation and propagation in intact rock–A review. Journal of Rock Mechanics and Geotechnical Engineering, 6(4), 287–300. https://doi.org/https://doi.org/10.1016/j.jrmge.2014.06.001
- Hu, C., Zheng, H-k., Zhou, W., Ma, G., & Hu, L. (2019). Numerical simulation of the reinforcement effect of rock bolts in granular mixtures. European Journal of Environmental and Civil Engineering, 23(7), 807–830. https://doi.org/https://doi.org/10.1080/19648189.2017.1311807
- Kargar, A., Rahmannejad, R., & Hajabasi, M. (2014). A semi-analytical elastic solution for stress field of lined non-circular tunnels at great depth using complex variable method. International Journal of Solids and Structures, 51(6), 1475–1482. https://doi.org/https://doi.org/10.1016/j.ijsolstr.2013.12.038
- Karrech, A., Abbassi, F., Basarir, H., & Attar, M. (2017). Self-consistent fractal damage of natural geo-materials in finite strain. Mechanics of Materials, 104, 107–120. https://doi.org/https://doi.org/10.1016/j.mechmat.2016.08.017
- Karrech, A., Poulet, T., & Regenauer-Lieb, K. (2012). A limit analysis approach to derive a thermodynamic damage potential for non-linear geomaterials. Philosophical Magazine, 92(28–30), 3439–3450. https://doi.org/https://doi.org/10.1080/14786435.2012.687469
- Karrech, A., Schrank, C., Freij-Ayoub, R., & Regenauer-Lieb, K. (2014). A multi-scaling approach to predict hydraulic damage of poromaterials. International Journal of Mechanical Sciences, 78, 1–7. https://doi.org/https://doi.org/10.1016/j.ijmecsci.2013.10.010
- Kim, H. M., Rutqvist, J., Jeong, J. H., Choi, B. H., Ryu, D. W., & Song, W. K. (2013). Characterizing excavation damaged zone and stability of pressurized lined rock caverns for underground compressed air energy storage. Rock Mechanics and Rock Engineering, 46(5), 1113–1124. https://doi.org/https://doi.org/10.1007/s00603-012-0312-4
- Leca, E., & Dormieux, L. (1990). Upper and lower bound solutions for the face stability of shallow circular tunnels in frictional material. Géotechnique, 40(4), 581–606. https://doi.org/https://doi.org/10.1680/geot.1990.40.4.581
- Li, P., Wang, F., & Fang, Q. (2018). Undrained analysis of ground reaction curves for deep tunnels in saturated ground considering the effect of ground reinforcement. Tunnelling and Underground Space Technology, 71, 579–590. https://doi.org/https://doi.org/10.1016/j.tust.2017.11.001
- Li, S., & Wang, M. (2008). An elastic stress–displacement solution for a lined tunnel at great depth. International Journal of Rock Mechanics and Mining Sciences, 45(4), 486–494. https://doi.org/https://doi.org/10.1016/j.ijrmms.2007.07.011
- Lu, A., Wang, S., Zhang, X., & Zhang, N. (2018). Solution of the elasto-plastic interface of circular tunnels in Hoek–Brown media subjected to non-hydrostatic stress. International Journal of Rock Mechanics and Mining Sciences, 106, 124–132. https://doi.org/https://doi.org/10.1016/j.ijrmms.2018.04.013
- Lu, A., Zhang, N., & Kuang, L. (2014). Analytic solutions of stress and displacement for a non-circular tunnel at great depth including support delay. International Journal of Rock Mechanics and Mining Sciences, 70, 69–81. https://doi.org/https://doi.org/10.1016/j.ijrmms.2014.04.008
- Lu, A., Zhang, N., Wang, S., & Zhang, X. (2017). Analytical solution for a lined tunnel with arbitrary cross sections excavated in orthogonal anisotropic rock mass. International Journal of Geomechanics, 17(9), 04017. https://ascelibrary.org/doi/abs/10.1061/(ASCE)GM.1943-5622.0000912
- Lu, A., Zhang, L., & Zhang, N. (2011). Analytic stress solutions for a circular pressure tunnel at pressure and great depth including support delay. International Journal of Rock Mechanics and Mining Sciences, 48(3), 514–519. https://doi.org/https://doi.org/10.1016/j.ijrmms.2010.09.002
- Muskhelishvili, N. I. (1954). Some basic problems of the mathematical theory of elasticity. Springer Science & Business Media.
- Nomikos, P., Rahmannejad, R., & Sofianos, A. (2011). Supported axisymmetric tunnels within linear viscoelastic burgers rocks. Rock Mechanics and Rock Engineering, 44(5), 553–564. https://doi.org/https://doi.org/10.1007/s00603-011-0159-0
- Park, K. (2004). Elastic solution for tunneling-induced ground movements in clays. International Journal of Geomechanics, 4(4), 310–318. https://doi.org/https://doi.org/10.1061/(ASCE)1532-3641(2004)4:4(310)
- Qi, C., Fourie, A., Chen, Q., & Dong, X. (2019). Analytical solution for stress distribution around arbitrary stopes using evolutionary complex variable methods. International Journal of Geomechanics, 19(10), 04019. https://ascelibrary.org/doi/full/10.1061/%28ASCE%29GM.1943-5622.0001499
- Shen, J., Jimenez, R., Karakus, M., & Xu, C. (2014). A simplified failure criterion for intact rocks based on rock type and uniaxial compressive strength. Rock Mechanics and Rock Engineering, 47(2), 357–369. https://doi.org/https://doi.org/10.1007/s00603-013-0408-5
- Song, F., Wang, H., & Jiang, M. (2018a). Analytical solutions for lined circular tunnels in viscoelastic rock considering various interface conditions. Applied Mathematical Modelling, 55, 109–130. https://doi.org/https://doi.org/10.1016/j.apm.2017.10.031
- Song, F., Wang, H., & Jiang, M. (2018b). Analytically-based simplified formulas for circular tunnels with two liners in viscoelastic rock under anisotropic initial stresses. Construction and Building Materials, 175, 746–767. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2018.04.079
- Song, Z., Yang, T., & Jiang, A. (2016). Elastic-plastic numerical analysis of tunnel stability based on the closest point projection method considering the effect of water pressure. Mathematical Problems in Engineering, 2016, 1–12. https://doi.org/https://doi.org/10.1155/2016/2569345
- Wang, H., Li, Y., Ni, Q., Utili, S., Jiang, M., & Liu, F. (2013). Analytical solutions for the construction of deeply buried circular tunnels with two liners in rheological rock. Rock Mechanics and Rock Engineering, 46(6), 1481–1498. https://doi.org/https://doi.org/10.1007/s00603-012-0362-7
- Wang, M., & Li, S. (2009). A complex variable solution for stress and displacement field around a lined circular tunnel at great depth. International Journal for Numerical and Analytical Methods in Geomechanics, 33(7), 939–951. https://doi.org/https://doi.org/10.1002/nag.749
- Yang, R., Wang, Q., & Yang, L. (2017). Closed-form elastic solution for irregular frozen wall of inclined shaft considering the interaction with ground. International Journal of Rock Mechanics and Mining Sciences, 100, 62–72. https://doi.org/https://doi.org/10.1016/j.ijrmms.2017.10.008
- Zhang, D., Ranjith, P., & Perera, M. (2016). The brittleness indices used in rock mechanics and their application in shale hydraulic fracturing: A review. Journal of Petroleum Science and Engineering, 143, 158–170. https://doi.org/https://doi.org/10.1016/j.petrol.2016.02.011
- Zhang, Q., Zhang, X., Wang, Z., Xiang, W., & Xue, J. (2017). Failure mechanism and numerical simulation of zonal disintegration around a deep tunnel under high stress. International Journal of Rock Mechanics and Mining Sciences, 93, 344–355. https://doi.org/https://doi.org/10.1016/j.ijrmms.2017.02.004
- Zhou, H., Chen, J., Lu, J., Jiang, Y., & Meng, F. (2018). A new rock brittleness evaluation index based on the internal friction angle and class I stress–strain curve. Rock Mechanics and Rock Engineering, 51, 1–8. https://doi.org/https://doi.org/10.1007/s00603-018-1487-0
- Zhou, X., & Shou, Y. (2013). Excavation-induced zonal disintegration of the surrounding rock around a deep circular tunnel considering unloading effect. International Journal of Rock Mechanics and Mining Sciences, 64, 246–257. https://doi.org/https://doi.org/10.1016/j.ijrmms.2013.08.010