Consideration of anisotropies related to bedding planes in the modelling of thick-walled hollow cylinder tests on Boom Clay

References

• Bastiaens, W., Bernier, F., Buyens, M., Demarche, M., Li, X. L., Linotte, J. M., & Verstricht, J. (2003). The connecting gallery-the extension of the HADES underground research facility at Mol, Belgium. EURIDICE report 03-294.
   Google Scholar
• Bastiaens, W., Bernier, F., & Li, X. L. (2007). SELFRAC: Experiments and conclusions on fracturing, self-healing and self-sealing processes in clays. Physics and Chemistry of the Earth, 32(8–14), 600–615. https://doi.org/10.1016/j.pce.2006.04.026
   Web of Science ®Google Scholar
• Bernier, F., Li, X. L., & Bastiaens, W. (2007). 25 years' geotechnical observation and testing in the tertiary Boom clay formation. Géotechnique, 57(2), 229–237. https://doi.org/10.1680/geot.2007.57.2.229
   Web of Science ®Google Scholar
• Bernier, F., Li, X. L., Verstricht, J., Barnichon J. D., Labiouse V., Bastiaens, W., Palut, J. M., Ben Slimane, J. K., Ghoreychi, M., Gaombalet, J., Huertas, F., Galera, J. M., Merrien, K., & Elorza, F. J. (2003). CLIPEX: Clay instrumentation programme for the extension of an underground research laboratory. European Communities EUR. 20619.
   Google Scholar
• Blümling, P., Bernier, F., Lebon, P., & Martin, D. C. (2007). The excavation damaged zone in clay formations time-dependent behaviour and influence on performance assessment. Physics and Chemistry of the Earth, 32(8–14), 588–599. https://doi.org/10.1016/j.pce.2006.04.034
   Web of Science ®Google Scholar
• Chen, G., Sillen, X., Verstricht, J., & Li, X. (2011). ATLAS III in situ heating test in boom clay: Field data, observation and interpretation. Computers and Geotechnics, 38(5), 683–696. https://doi.org/10.1016/j.compgeo.2011.04.001
   Web of Science ®Google Scholar
• Coll, C. (2005). Endommagement des roches argileuses et perméabilité induite au voisinage d’ouvrages souterrains. Université Joseph Fourier – Laboratoire Sols, Solides, Structures.
   Google Scholar
• Dao, L. Q. (2015). Etude du comportement anisotrope de l'argile de Boom. Université Paris – Est.
   Google Scholar
• François, B., Labiouse, V., Dizier, A., Marinelli, F., Charlier, R., & Collin, F. (2014). Hollow cylinder tests on boom clay: Modelling of strain localization in the anisotropic excavation damaged zone. Rock Mechanics and Rock Engineering, 47(1), 71–86. https://doi.org/10.1007/s00603-012-0348-5
   Web of Science ®Google Scholar
• Giraud, A., Picard, J. M., & Rousset, G. (1993). Time dependent behavior of tunnels excavated in porous mass. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 30(7), 1453–1459.
   Google Scholar
• Hall, S. A. (2006). A methodology for 7D warping and deformation monitoring using time-lapse seismic data. Geophysics, 71(4), 021–031. https://doi.org/10.1190/1.2212227
   Web of Science ®Google Scholar
• Hall, S. A., Lenoir, N., Viggiani, G., Desrues, J., Bésuelle, P. (2009). Strain localisation in sand under triaxial loading: Characterisation by x-ray micro tomography and 3D Digital Image Correlation. Proceedings of the 1st International Symposium on Computational Geomechanics (ComGeo I). Juan-les-Pins, Cote d'Azur, France. 239–247.
   Google Scholar
• Horseman, S. T., Winter, M. G., & Enwistle, D. C. (1987). Geotechnical characterization of boom clay in relation to the disposal of radioactive waste. Office for Official Publications of the European Communities. EUR 10987 EN.
   Google Scholar
• Ismael, M., & Konietzky, H. (2019). Constitutive model for inherent anisotropic rocks: Ubiquitous joint model based on the Hoek-Brown failure criterion. Computers and Geotechnics, 105, 99–109. https://doi.org/10.1016/j.compgeo.2018.09.016
   Web of Science ®Google Scholar
• Jaeger, J. C. (1960). Shear failure of anisotropic rocks. Geological Magazine, 97(1), 65–72. https://doi.org/10.1017/S0016756800061100
   Google Scholar
• Kivell, S. (2015). Numerical Modelling of Excavation Galleries in Anisotropic Clay Formations Master Thesis EPFL.
   Google Scholar
• Labiouse, V., Sauthier, C., & You, S. (2014). Hollow cylinder simulation experiments of galleries in boom clay formation. Rock Mechanics and Rock Engineering, 47(1), 43–55. https://doi.org/10.1007/s00603-012-0332-0
   Web of Science ®Google Scholar
• Labiouse, V., & Vietor, T. (2014). Laboratory and in situ simulation tests of the excavation damaged zone around galleries in Opalinus clay. Rock Mechanics and Rock Engineering, 47(1), 57–70. https://doi.org/10.1007/s00603-013-0389-4
   Web of Science ®Google Scholar
• Li, X. L. (2013). TIMODAZ: A successful international cooperation project to investigate the thermal impact on the EDZ around a radioactive waste disposal in clay host rocks. Journal of Rock Mechanics and Geotechnical Engineering, 5(3), 231–242. https://doi.org/10.1016/j.jrmge.2013.05.003
   Google Scholar
• Oka, F., Kimoto, S., Kobayashi, H., & Adachi, T. (2002). Anisotropic behavior of soft sedimentary rock and a constitutive model. Soils and Foundations, 42(5), 59–70. https://doi.org/10.3208/sandf.42.5_59
   Web of Science ®Google Scholar
• Peguiron, F., & Labiouse, V. (2020). Analytical solution for the undrained unloading of hollow cylinders in porous elastoplastic media (manuscript in preparation for the International Journal for Numerical and Analytical Methods in Geomechanics).
   Google Scholar
• Peguiron, F., & Labiouse, V. (2021). In situ tomography of thick-walled hollow cylinder tests on Boom Clay samples cored parallel and perpendicular to the bedding (future publication).
   Google Scholar
• Sainsbury, B. L., & Sainsbury, D. P. (2017). Practical use of the ubiquitous-joint constitutive model for the simulation of anisotropic rock masses. Rock Mechanics and Rock Engineering, 50(6), 1507–1528. https://doi.org/10.1007/s00603-017-1177-3
   Web of Science ®Google Scholar
• Souley, M., Seyedi, D., Vu, M. N., Kazmierczak, J.-B., & Armand, G. (2017). Anisotropic hydromechanical modelling of a deep drift at the Meuse/Haute-Marne URL. In Clay Conference. Davos.
   Google Scholar
• Truty, A., Zimmermann, T., Podlés, K., & Obrzud, R. (2018). ZSOIL 2018 Manual – Theory. Elmepress International: Lausanne, Zace Services Ltd, Software engineering.
   Google Scholar
• You, S., Ji, H., Labiouse, V., Hall, S., & Viggiani, G. (2015). Quantitative analysis of deformation in hollow cylinder tests on anisotropic clay formations. International Journal of Mining Science and Technology, 25(2), 299–303. https://doi.org/10.1016/j.ijmst.2015.02.020
   Web of Science ®Google Scholar