189
Views
0
CrossRef citations to date
0
Altmetric
Original Articles

A review of different pile design approaches in chalk used in France and the UK: case studies from French sites

, &
Pages 4432-4456 | Received 19 May 2020, Accepted 17 Nov 2020, Published online: 09 Dec 2020

References

  • AFNOR (2012). Justification des ouvrages géotechniques-Normes d’application nationale de l’Eurocode 7-Fondations profondes, NF P94-282, Norme française. AFNOR Groupe.
  • API (2011). Recommended practice for planning, designing and constructing fixed offshore platforms: Working stress design, RP 2A-WSD (21st ed.). American Petroleum Institute.
  • Baguelin, F., Burlon, S., Bustamante, M., Gianeselli, L., Habert, J., & Legrand, S. (2012). Justification de la portance des pieux avec la norme “fondations profondes” NFP94-262ETLE PRESSIOMETRE8.
  • Bogard, J. D., & Matlock, H. (1990). Application of model pile tests to axial pile design [Paper presentation]. Offshore Technology Conference, Houston, Texas. https://doi.org/https://doi.org/10.4043/6376-MS
  • BSI (2015). Code of practice for foundations, BS 8004:2015. The British Standards Institution.
  • Buckley, R. M., Jardine, R. J., Kontoe, S., Barbosa, P., & Schroeder, F. C. (2020). Full-scale observations of dynamic and static axial responses of offshore piles driven in chalk and tills. Géotechnique, 70(8), 657–681. https://doi.org/https://doi.org/10.1680/jgeot.19.TI.001
  • Buckley, R. M., Jardine, R. J., Kontoe, S., & Lehane, B. M. (2018). Effective stress regime around a jacked steel pile during installation ageing and load testing in chalk. Canadian Geotechnical Journal, 55(11), 1577–1591. https://doi.org/https://doi.org/10.1139/cgj-2017-0145
  • Buckley, R. M., Jardine, R. J., Kontoe, S., Parker, D., & Schroeder, F. C. (2018). Ageing and cyclic behaviour of axially loaded piles driven in chalk. Géotechnique, 68(2), 146–161. https://doi.org/https://doi.org/10.1680/jgeot.17.P.012
  • Burlon, S., Frank, R., Baguelin, F., Habert, J., & Legrand, S. (2014). Model factor for the bearing capacity of piles from pressuremeter test results: Eurocode 7 approach. Géotechnique, 64(7), 513–525. https://doi.org/https://doi.org/10.1680/geot.13.P.061
  • Bustamante, M., Combarieu, O., & Gianeselli, L. (1980). Portance des pieux dans la craie altérée. Annales de L’institut Technique Du Batiment et Des Travaux Publics, 388(SOL FOND 174), 26–56.
  • Bustamante, M., & Gianeselli, L. (1995). Etude expérimentale de la portance de pieux battus dans la craie altérée, Viaduc du Scardon [Internal LCPC Report: unpublished]. Laboratoire Centrale des Ponts et Chaussées, LCPC.
  • Bustamante, M., & Gianeselli, L. (2006). Règles de calcul de la portance des pieux aux ELU – Méthode pressiométrique [Paper presentation]. Congrès ELU-ELS, Symposium International Sur Les États Limites Ultimes Des Ouvrages Géotechniques, Paris, France.
  • Ciavaglia, F., Carey, J., & Diambra, A. (2017). Time-dependent uplift capacity of driven piles in low to medium density chalk. Géotechnique Letters, 7(1), 90–96. https://doi.org/https://doi.org/10.1680/jgele.16.00162
  • Florentin, J., L’Hériteau, G., Farhi, M., & Parez, L. (1961). Observations faites sur la craie comme couche de fondation [Paper presentation]. Congrès International de Mécanique Des Sols et de Travaux de Fondations, Paris, France.
  • Gavin, K., Jardine, R., Karlsrud, K., & Lehane, B. (2015). The effects of pile ageing on the shaft capacity of offshore piles in sand. In V. Meyer (Ed.), Frontiers in offshore geotechnics III (pp. 129–151). CRC Press. https://doi.org/https://doi.org/10.1201/b18442-8
  • Hobbs, N. B., & Atkinson, M. S. (1993). Compression and tension tests on an open-ended tube pile in chalk. Ground Engineering, 26(3), 31–34.
  • IFSTTAR (2015). Essais de chargement sur des pieux refsol: Compression et traction, Montereau-Fault-Yonne (77) [Internal IFSTTAR Report: unpublished]. Institut Français Des Sciences Et Technologies, Des Transports, De L’aménagement Et Des Réseaux, Ifsttar.
  • Jardine, R. J., Buckley, R. M., Kontoe, S., Barbosa, P., & Schroeder, F. C. (2018). Behaviour of piles driven in chalk. Engineering in Chalk, 33–51. https://doi.org/https://doi.org/10.1680/eiccf.64072.033
  • Jardine, R. J., Chow, F. C., Overy, R., & Standing, J. R. (2005). ICP design methods for driven piles in sands and clays. Thomas Telford Ltd.
  • Jardine, R. J., Standing, J. R., & Chow, F. C. (2006). Some observations of the effects of time on the capacity of piles driven in sand. Géotechnique, 56(4), 227–244. https://doi.org/https://doi.org/10.1680/geot.2006.56.4.227
  • Lake, L. (1975). Engineering properties of chalk with special reference to foundation design and performance. University of Surrey.
  • LCPC (2004). Essais de chargement de pieux refoulants OMEGA et ATLAS ancrés dans une craie altérée, Station d’épuration de Cambrai [Internal LCPC report: unpublished]. Laboratoire Centrale des Ponts et Chaussées, LCPC.
  • Lord, J. A., Clayton, C. R. I., & Mortimore, R. N. (2002). Engineering in chalk. CIRIA.
  • Mesri, G., Feng, T. W., & Benak, J. M. (1990). Postdensification penetration resistance of clean sands. Journal of Geotechnical Engineering, 116(7), 21.
  • Mortimore, R. N. (2018). Developing ground models for chalk engineering: Links across the disciplines. Engineering in Chalk, 7–32. https://doi.org/https://doi.org/10.1680/eiccf.64072.007
  • Mortimore, R. N., & Fielding, P. M. (1990). The relationship between texture, density and strength of chalk. In Chalk (Vol. 1–0, pp. 109–132). Thomas Telford Publishing. https://doi.org/https://doi.org/10.1680/c.15418.0011
  • Pasturel, D. (1968). Essais de chargement de pieux dans la craie altérée. Bulletin Des Laboratoires Des Ponts et chaussées – Réf 388, 24 p.
  • Tan, S. L., Cuthbertson, J., & Kimmerling, R. E. (2004). Prediction of pile set-up in non-cohesive soils. In J. A. Di Maggio and M. H. Hussein (Eds.), Current practices and future trends in deep foundations (pp. 50–65). American Society of Civil Engineers (ASCE).

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.