SBR-latex modified cementitious composite coatings for concrete rehabilitation and assessment of performance measure

References

• Afridi, M. U. K., Ohama, Y., Demura, K., & Iqbal, M. Z. (2003). Development of polymer films by the coalescence of polymer particles in powdered and aqueous polymer-modified mortars. Cement and Concrete Research, 33(11), 1715–1721.
   Web of Science ®Google Scholar
• Assaad, J. J. (2017). Feasibility of specialty cement possessing improved bond properties. Advances in Cement Research, 29(7), 302–312. https://doi.org/10.1680/jadcr.17.00031
   Web of Science ®Google Scholar
• Assaad, J. J., Nasr, D., Chwaifaty, S., & Tawk, T. (2020). Parametric study on polymer-modified pigmented cementitious overlays for colored applications. Journal of Building Engineering, 27, 101009. https://doi.org/10.1016/j.jobe.2019.101009
   Web of Science ®Google Scholar
• ASTM. (2002). ASTM D 4541-02 standard test method for pull-off strength of coatings using portable adhesion testers. http://www.astm.org/cgi-bin/resolver.cgi?D412-16
   Google Scholar
• ASTM. (2008). Standard test methods for water vapor transmission of organic coating films 1. Annu B ASTM Stand (Vol. 11, pp. 1–5). http://www.astm.org/cgi-bin/resolver.cgi?D1653
   Google Scholar
• ASTM International. (2016). ASTM D412-15 standard test methods for vulcanized rubber and thermoplastic elastomers. Annu. B. ASTM Stand.
   Google Scholar
• Bader, T., & Lackner, R. (2020). Acrylic surface treatment applied to architectural High-Performance Concrete (HPC): Identification of potential pitfalls on the way to long-lasting protection. Construction and Building Materials, 237, 117415. https://doi.org/10.1016/j.conbuildmat.2019.117415
   Web of Science ®Google Scholar
• Barluenga, G., & Hernández-Olivares, F. (2004). SBR latex modified mortar rheology and mechanical behaviour. Cement and Concrete Research, 34(3), 527–535. https://linkinghub.elsevier.com/retrieve/pii/S0008884603003247 https://doi.org/10.1016/j.cemconres.2003.09.006
   Web of Science ®Google Scholar
• Benali, Y., & Ghomari, F. (2017). Latex influence on the mechanical behavior and durability of cementitious materials. Journal of Adhesion Science and Technology, 31(3), 219–241. https://doi.org/10.1080/01694243.2016.1208378
   Web of Science ®Google Scholar
• Benali, Y., & Ghomari, F. (2018). Mechanical behavior and durability of latex modified mortars. Journal of Building Materials and Structures, 5, 110–126.
   Google Scholar
• Butler, L. N., Fellows, C. M., & Gilbert, R. G. (2004). Effect of surfactant systems on the water sensitivity of latex films. Journal of Applied Polymer Science, 92(3), 1813–1823.
   Web of Science ®Google Scholar
• Çolak, A. (2005). Properties of plain and latex modified Portland cement pastes and concretes with and without superplasticizer. Cement and Concrete Research, 35(8), 1510–1521. https://doi.org/10.1016/j.cemconres.2004.11.012
   Web of Science ®Google Scholar
• Diab, A. M., Abd Elmoaty, A. E. M., & Tag Eldin, M. R. (2017). Slant shear bond strength between self compacting concrete and old concrete. Construction and Building Materials, 130, 73–82. https://doi.org/10.1016/j.conbuildmat.2016.11.023
   Web of Science ®Google Scholar
• Diab, A. M., Elyamany, H. E., & Ali, A. H. (2013). Experimental investigation of the effect of latex solid/water ratio on latex modified co-matrix mechanical properties. Alexandria Engineering Journal, 52(1), 83–98. https://doi.org/10.1016/j.aej.2012.11.002
   Google Scholar
• Diab, A. M., Elyamany, H. E., & Ali, A. H. (2014). The participation ratios of cement matrix and latex network in latex cement co-matrix strength. Alexandria Engineering Journal, 53(2), 309–317. https://doi.org/10.1016/j.aej.2014.01.008
   Google Scholar
• Diamanti, M. V., Brenna, A., Bolzoni, F., Berra, M., Pastore, T., & Ormellese, M. (2013). Effect of polymer modified cementitious coatings on water and chloride permeability in concrete. Construction and Building Materials, 49, 720–728. https://doi.org/10.1016/j.conbuildmat.2013.08.050
   Web of Science ®Google Scholar
• Dou, J., Zhang, G., Li, S., Tian, C., Ji, C., & Zhang, C. (2019). Properties of degraded waste PET-modified styrene-acrylic emulsions for cement slurry materials. Advances in Civil Engineering, 2019, 1–14.
   Web of Science ®Google Scholar
• Eichburg, A. G. S D. E. (2013) Testing the Test: Water absorption with RILEM tubes. Constr. Specifie. https://www.constructionspecifier.com/testing-the-test-water-absorption-with-rilem-tubes/
   Google Scholar
• Eren, F., Gödek, E., Keskinateş, M., Tosun-Felekoğlu, K., & Felekoğlu, B. (2017). Effects of latex modification on fresh state consistency, short term strength and long term transport properties of cement mortars. Construction and Building Materials, 133, 226–233.
   Web of Science ®Google Scholar
• Ferraris, C., & Garboczi, E. (2013). Measuring cement particle size and surface area by laser diffraction. Meas. Cem. Part. Size Surf. Area by Laser Diffr. Transportation Research Board.
   Google Scholar
• Granier, V., & Sartre, A. (1995). Ordering and adhesion of latex particles on model inorganic surfaces. Langmuir, 11(6), 2179–2186. https://doi.org/10.1021/la00006a054
   Web of Science ®Google Scholar
• Hirsch, F., & Kästner, M. (2017). Microscale simulation of adhesive and cohesive failure in rough interfaces. Engineering Fracture Mechanics, 178, 416–432. https://doi.org/10.1016/j.engfracmech.2017.02.026
   Web of Science ®Google Scholar
• Jenni, A., Holzer, L., Zurbriggen, R., & Herwegh, M. (2005). Influence of polymers on microstructure and adhesive strength of cementitious tile adhesive mortars. Cement and Concrete Research, 35(1), 35–50.
   Web of Science ®Google Scholar
• Kim, M. O. (2020). Influence of polymer types on the mechanical properties of polymer-modified cement mortars. Applied Sciences, 10, 1061–1072.
   Google Scholar
• Knapen, E., & Van Gemert, D. (2015). Polymer film formation in cement mortars modified with water-soluble polymers. Cement and Concrete Composites, 58, 23–28. https://doi.org/10.1016/j.cemconcomp.2014.11.015
   Web of Science ®Google Scholar
• Kwan, A. K. H., & Chen, J. J. (2013). Adding fly ash microsphere to improve packing density, flowability and strength of cement paste. Powder Technology, 234, 19–25. https://doi.org/10.1016/j.powtec.2012.09.016
   Web of Science ®Google Scholar
• Li, L., Wang, R., & Lu, Q. (2018). Influence of polymer latex on the setting time, mechanical properties and durability of calcium sulfoaluminate cement mortar. Construction and Building Materials, 169, 911–922. https://doi.org/10.1016/j.conbuildmat.2018.03.005
   Web of Science ®Google Scholar
• Lu, Z., Kong, X., Zhang, C., Jansen, D., Neubauer, J., & Goetz-Neunhoeffer, F. (2019). Effects of two oppositely charged colloidal polymers on cement hydration. Cement and Concrete Composites, 96, 66–76. https://doi.org/10.1016/j.cemconcomp.2018.11.014
   Web of Science ®Google Scholar
• Machotová, J., Černošková, E., Honzíček, J., & Šňupárek, J. (2018). Water sensitivity of fluorine-containing polyacrylate latex coatings: Effects of crosslinking and ambient drying conditions. Progress in Organic Coatings, 120, 266–273.
   Web of Science ®Google Scholar
• Malvern, I. L. (2017). Mastersizer 3000 User Manual. Transport. Malvern Instruments Ltd. http://www.montana.edu/eal-lres/documents/Mastersizer-3000-user-manual-English-MAN0474-2-1.pdf
   Google Scholar
• Mansur, A. A. P., Nascimento, O. d., & Mansur, H. S. (2009). Physico-chemical characterization of EVA-modified mortar and porcelain tiles interfaces. Cement and Concrete Research, 39(12), 1199–1208. https://doi.org/10.1016/j.cemconres.2009.07.020
   Web of Science ®Google Scholar
• Ning, Y., Er-Lei, B., Jin-Yu, X., Guang, P., & Bo-Xu, M. (2018). Study on tensile mechanical property of styrene-acrylic cement composite material. IOP Conference Series: Earth and Environmental Science, 153(2), 022022.
   Google Scholar
• Nwaubani, S. O. Alexander, M. G., Beushausen, H., Dehn, F. (Eds.). (2018). Non-destructive testing of concrete treated with penetrating surface sealant using a Karsten-tube. MATEC Web of Conferences, 199, 07010.
   Google Scholar
• Ohama, Y. (1987). Principle of latex modification and some typical properties of latex-modified mortars and concretes. ACI Materials Journal, 84, 511–518.
   Web of Science ®Google Scholar
• Ohama, Y., & Ramchnandran, V. S. (1995). Hand book of polymer-modified concrete and mortars: properties and process technology. Park Ridge, N.J.: Noyes Publications. https://public.ebookcentral.proquest.com/choice/publicfullrecord.aspx?p=421206
   Google Scholar
• Ohama, Y. (1997). Recent progress in concrete-polymer composites. Advanced Cement Based Materials, 5(2), 31–40.
   Google Scholar
• Ohama, Y., Demura, K., & Nagao, H. (1986). Adhesion of polymer-modified mortars to ordinary cement mortar by different test methods. In Y. Ohama K. Demura H. Nagao T. Ogi (Eds.), Adhes between PolymConcr/Adhésion entre polymèresBét (pp. 719–729). Springer US.
   Google Scholar
• Phadke, D. S., & Eichorst, J. L. (1991). Evaluation of particle size distribution and specific surface area of magnesium stearate. Drug Development and Industrial Pharmacy, 17(6), 901–906.
   Web of Science ®Google Scholar
• Ramli, M., & Akhavan Tabassi, A. (2012). Effects of polymer modification on the permeability of cement mortars under different curing conditions: A correlational study that includes pore distributions, water absorption and compressive strength. Construction and Building Materials, 28(1), 561–570. https://doi.org/10.1016/j.conbuildmat.2011.09.004
   Web of Science ®Google Scholar
• Rashid, K., Ahmad, M., Ueda, T., Deng, J., Aslam, K., Nazir, I., & Azam Sarwar, M. (2020). Experimental investigation of the bond strength between new to old concrete using different adhesive layers. Construction and Building Materials, 249, 118798. https://doi.org/10.1016/j.conbuildmat.2020.118798
   Web of Science ®Google Scholar
• Sánchez, M., Faria, P., Ferrara, L., Horszczaruk, E., Jonkers, H. M., Kwiecień, A., Mosa, J., Peled, A., Pereira, A. S., Snoeck, D., Stefanidou, M., Stryszewska, T., & Zając, B. (2018). External treatments for the preventive repair of existing constructions: A review. Construction and Building Materials, 193, 435–452. https://doi.org/10.1016/j.conbuildmat.2018.10.173
   Web of Science ®Google Scholar
• Shen, L., Jiang, H., Cao, J., Zhang, M., & Zhang, H. (2020). A comparison study of the performance of three electro-migrating corrosion inhibitors in improving the concrete durability and rehabilitating decayed reinforced concrete. Construction and Building Materials, 238, 117673. https://doi.org/10.1016/j.conbuildmat.2019.117673
   Web of Science ®Google Scholar
• Specification for elastomeric wall coating SS 500, (2015). Singapore Standard council. https://www.singaporestandardseshop.sg/Product/SSPdtDetail/1428e253-df7f4c5a-ab36-579121b7f18c
   Google Scholar
• Tarannum, N., Pooja, K., & Khan, R. (2020). Preparation and applications of hydrophobic multicomponent based redispersible polymer powder: A review. Construction and Building Materials, 247, 118579. https://doi.org/10.1016/j.conbuildmat.2020.118579
   Web of Science ®Google Scholar
• Tian, Y., Jin, X-Y., Jin, N-G., Zhao, R., Li, Z-J., & Ma, H-Y. (2013). Research on the microstructure formation of polyacrylate latex modified mortars. Construction and Building Materials, 47, 1381–1394.
   Web of Science ®Google Scholar
• Ukrainczyk, N., & Rogina, A. (2013). Styrene–butadiene latex modified calcium aluminate cement mortar. Cement and Concrete Composites, 41, 16–23. https://doi.org/10.1016/j.cemconcomp.2013.04.012
   Web of Science ®Google Scholar
• Van Gemert, D., Czarnecki, L., Maultzsch, M., Schorn, H., Beeldens, A., Łukowski, P., & Knapen, E. (2005). Cement concrete and concrete–polymer composites: Two merging worlds. Cement and Concrete Composites, 27(9–10), 926–933. https://doi.org/10.1016/j.cemconcomp.2005.05.004
   Web of Science ®Google Scholar
• Wang, M., Wang, R., Yao, H., Farhan, S., Zheng, S., Wang, Z., Du, C., & Jiang, H. (2016). Research on the mechanism of polymer latex modified cement. Construction and Building Materials, 111, 710–718. https://doi.org/10.1016/j.conbuildmat.2016.02.117
   Web of Science ®Google Scholar
• Wang, R., Lackner, R., & Wang, P.-M. (2011). Effect of styrene-butadiene rubber latex on mechanical properties of cementitious materials highlighted by means of nanoindentation. Strain, 47(2), 117–126. https://doi.org/10.1111/j.1475-1305.2008.00549.x
   Web of Science ®Google Scholar
• Wang, R., & Wang, P.-M. (2011). Formation of hydrates of calcium aluminates in cement pastes with different dosages of SBR powder. Construction and Building Materials, 25(2), 736–741.
   Web of Science ®Google Scholar
• Wang, R., Wang, P.-M., & Li, X.-G. (2005). Physical and mechanical properties of styrene–butadiene rubber emulsion modified cement mortars. Cement and Concrete Research, 35(5), 900–906.
   Web of Science ®Google Scholar
• Wu, K.-R., Zhang, D., & Song, J.-M. (2002). Properties of polymer-modified cement mortar using pre-enveloping method. Cement and Concrete Research, 32(3), 425–429.
   Web of Science ®Google Scholar
• Xue, X., Yang, J., Zhang, W., Jiang, L., Qu, J., Xu, L., Zhang, H., Song, J., Zhang, R., Li, Y., Qin, J., & Zhang, Z. (2015). The study of an energy efficient cool white roof coating based on styrene acrylate copolymer and cement for waterproofing purpose—Part II: Mechanical and water impermeability properties. Construction and Building Materials, 96, 666–672. https://doi.org/10.1016/j.conbuildmat.2015.08.033
   Web of Science ®Google Scholar
• Yang, Z., Peng, H., Wang, W., & Liu, T. (2010). Crystallization behavior of poly(ε-caprolactone)/layered double hydroxide nanocomposites. Journal of Applied Polymer Science, 116, 2667. https://doi.org/10.1002/app.31787
   Web of Science ®Google Scholar
• Zeng, Q., Li, K., Fen-Chong, T., & Dangla, P. (2012). Cement and Concrete Research Pore structure characterization of cement pastes blended with high-volume fly-ash. Cement and Concrete Research, 42(1), 194–204.
   Web of Science ®Google Scholar
• Zhang, Z., Wang, P., & Wu, J. (2012). Dynamic mechanical properties of EVA polymer-modified cement paste at early age. Physics Procedia, 25, 305–310. https://doi.org/10.1016/j.phpro.2012.03.088
   Google Scholar
• Zhang, Z., Wang, P., & Wu, J. (2013). Study of the mechanical damping behavior of SBR-modified cement pastes by dynamic mechanical analyzer. Journal of Thermal Analysis and Calorimetry, 114(3), 1135–1141. https://doi.org/10.1007/s10973-013-3165-5
   Web of Science ®Google Scholar
• Zhao, Z., Qu, X., & Li, J. (2020). Application of polymer modified cementitious coatings (PCCs) for impermeability enhancement of concrete. Construction and Building Materials, 249, 118769. https://doi.org/10.1016/j.conbuildmat.2020.118769
   Web of Science ®Google Scholar