Nonlinear models to predict stress versus strain of early age strength of flowable ordinary Portland cement

References

• Afolabi, R. O., Orodu, O. D., Efeovbokhan, V. E., & Rotimi, O. J. (2017). Optimizing the rheological properties of silica nano-modified bentonite mud using overlaid contour plot and estimation of maximum or upper shear stress limit. Cogent Engineering, 4(1), 1287248. https://doi.org/10.1080/23311916.2017.1287248
   Web of Science ®Google Scholar
• Bessaies-Bey, H., Palacios, M., Pustovgar, E., Hanafi, M., Baumann, R., Flatt, R. J., & Roussel, N. (2018). Non-adsorbing polymers and yield stress of cement paste: Effect of depletion forces. Cement and Concrete Research, 111, 209–217. https://doi.org/10.1016/j.cemconres.2018.05.004
   Web of Science ®Google Scholar
• Brückner, T., Schamel, M., Kübler, A. C., Groll, J., & Gbureck, U. (2016). Novel bone wax based on poly (ethylene glycol)–calcium phosphate cement mixtures. Acta Biomaterialia, 33, 252–263.
   PubMed Web of Science ®Google Scholar
• Christodoulou, D. N., Droudakis, A. I., Pantazopoulos, I. A., Markou, I. N., & Atmatzidis, D. K. (2009). Groutability and effectiveness of microfine cement grouts. In Proceedings of the 17th International Conference on Soil Mechanics and Geotechnical Engineering. https://doi.org/10.3233/978-1-60750-031-5.
   Google Scholar
• Das, B. B., & Neithalath, N. (Eds.). (2018). Sustainable construction and building materials: Select proceedings of ICSCBM 2018 (Vol. 25). Springer.
   Google Scholar
• Dehghan, S. M., Najafgholipour, M. A., Baneshi, V., & Rowshanzamir, M. (2019). Experimental study on effect of water–cement ratio and sand grading on workability and mechanical properties of masonry mortars in Iran. Iranian Journal of Science and Technology, Transactions of Civil Engineering, 43(1), 21–32. https://doi.org/10.1007/s40996-018-0110-7
   Web of Science ®Google Scholar
• Dillon, P. J. (Ed.). (2020). Management of aquifer recharge for sustainability: Proceedings of the 4th international symposium on artificial recharge of groundwater. CRC Press. September 2002.
   Google Scholar
• Dong, B., Wu, Y., Teng, X., Zhuang, Z., Gu, Z., Zhang, J., Xing, F., & Hong, S. (2019). Investigation of the Cl − migration behavior of cement materials blended with fly ash or/and slag via the electrochemical impedance spectroscopy method. Construction and Building Materials, 211, 261–270. https://doi.org/10.1016/j.conbuildmat.2019.03.198
   Web of Science ®Google Scholar
• Duran, A., González-Sánchez, J. F., Fernández, J. M., Sirera, R., Navarro-Blasco, Í., & Alvarez, J. I. (2018). Influence of two polymer-based superplasticizers (poly-naphthalene sulfonate, PNS, and lignosulfonate, LS) on compressive and flexural strength, freeze-thaw, and sulphate attack resistance of lime-metakaolin grouts. Polymers, 10(8), 824. https://doi.org/10.3390/polym10080824
   PubMed Web of Science ®Google Scholar
• Emad, W., Salih, A., & Kurda, R. (2021). Forecasting the mechanical properties of soilcrete using various simulation approaches. Structures, 34, 653–665. https://doi.org/10.1016/j.istruc.2021.08.018
   Web of Science ®Google Scholar
• Erzengin, S. G., Kaya, K., Özkorucuklu, S. P., Özdemir, V., & Yıldırım, G. (2018). The properties of cement systems superplasticized with methacrylic ester-based polycarboxylates. Construction and Building Materials, 166, 96–109. https://doi.org/10.1016/j.conbuildmat.2018.01.088
   Web of Science ®Google Scholar
• Flessati, L., Della Vecchia, G., & Musso, G. (2021). Mechanical behavior and constitutive modeling of cement–bentonite mixtures for cutoff walls. Journal of Materials in Civil Engineering, 33(3), 04020483. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003584
   Web of Science ®Google Scholar
• Ghafor, K., Mahmood, W., Qadir, W., & Mohammed, A. (2020). Effect of particle size distribution of sand on mechanical properties of cement mortar modified with microsilica. ACI Materials Journal, 117(1), 47-60. https://doi.org/10.14359/51719070
   Google Scholar
• Ghafor, K., Qadir, S., Mahmood, W., & Mohammed, A. (2020). Statistical variations and new correlation models to predict the mechanical behaviour of the cement mortar modified with silica fume. Geomechanics and Geoengineering, 1–13. https://doi.org/10.1080/17486025.2020.1714083
   Google Scholar
• González-Sánchez, J. F., Taşcı, B., Fernández, J. M., Navarro-Blasco, Í., & Alvarez, J. I. (2020). Combination of polymeric superplasticizers, water repellents and pozzolanic agents to improve air lime-based grouts for historic masonry repair. Polymers, 12(4), 887. https://doi.org/10.3390/polym12040887
   PubMed Web of Science ®Google Scholar
• Gupta, L. K., & Vyas, A. K. (2018). Impact on mechanical properties of cement sand mortar containing waste granite powder. Construction and Building Materials, 191, 155–164. https://doi.org/10.1016/j.conbuildmat.2018.09.203
   Web of Science ®Google Scholar
• Khalid, U., Liao, C. C., Ye, G. L., & Yadav, S. K. (2018). Sustainable improvement of soft marine clay using low cement content: A multi-scale experimental investigation. Construction and Building Materials, 191, 469–480. https://doi.org/10.1016/j.conbuildmat.2018.10.034
   Web of Science ®Google Scholar
• Khudhair, M. H. R., Elyoubi, M. S., & Elharfi, A. (2017). Formulation and characterization of a new ecological cementitious material at base of different percentage of limestone fillers: Study of physical-chemical and mechanical properties. Journal of Materials and Environmental Science, 8(11), 3973–3985.
   Google Scholar
• Łaźniewska-Piekarczyk, B. (2013). The type of air-entraining and viscosity modifying admixtures and porosity and frost durability of high performance self-compacting concrete. Construction and Building Materials, 40, 659–671. https://doi.org/10.1016/j.conbuildmat.2012.11.032
   Web of Science ®Google Scholar
• Li, W., Shaikh, F. U., Wang, L., Lu, Y., Wang, B., Jiang, C., & Su, Y. (2019). Experimental study on shear property and rheological characteristic of superfine cement grouts with nano-SiO2 addition. Construction and Building Materials, 228, 117046. https://doi.org/10.1016/j.conbuildmat.2019.117046
   Web of Science ®Google Scholar
• Liang, K., Xie, L., He, B., Zhao, P., Zhang, Y., & Hu, W. (2021). Effects of grain size distributions on the macro-mechanical behavior of rock salt using micro-based multiscale methods. International Journal of Rock Mechanics and Mining Sciences, 138, 104592. https://doi.org/10.1016/j.ijrmms.2020.104592
   Web of Science ®Google Scholar
• Lumingkewas, R. H., Hadiwardoyo, S. P., & Husen, A. (2020). The effect of nano cement on the compressive strength of coconut fibers reinforced concrete composite. Key Engineering Materials, 831, 110–114. https://doi.org/10.4028/www.scientific.net/KEM.831.110
   Google Scholar
• Mahmood, W., & Mohammed, A. (2020a). Hydraulic conductivity, grain size distribution (GSD) and cement injectability limits predicted of sandy soils using Vipulanandan models. Geotechnical and Geological Engineering, 38(2), 2120–2139. https://doi.org/10.1007/s10706-019-01153-z
   Web of Science ®Google Scholar
• Mahmood, W., & Mohammed, A. (2020b). New Vipulanandan pq model for particle size distribution and groutability limits for sandy soils. Journal of Testing and Evaluation, 48(5), 20180606. https://doi.org/10.1520/JTE20180606
   Web of Science ®Google Scholar
• Mahmood, W., Mohammed, A., & Ghafor, K. (2019). Viscosity, yield stress and compressive strength of cement-based grout modified with polymers. Results in Materials, 4, 100043. https://doi.org/10.1016/j.rinma.2019.100043
   Google Scholar
• Mahmood, W., Mohammed, A., Ghafor, K., & Sarwar, W. (2020). Model technics to predict the impact of the particle size distribution (PSD) of the sand on the mechanical properties of the cement mortar modified with fly ash. Iranian Journal of Science and Technology, Transactions of Civil Engineering, 45, 1657–1684. https://doi.org/10.1007/s40996-020-00522-6
   Web of Science ®Google Scholar
• Meng, W., Kumar, A., & Khayat, K. H. (2019). Effect of silica fume and slump-retaining polycarboxylate-based dispersant on the development of properties of Portland cement paste. Cement and Concrete Composites, 99, 181–190. https://doi.org/10.1016/j.cemconcomp.2019.03.021
   Web of Science ®Google Scholar
• Mohammed, A. S. (2018). Vipulanandan models to predict the electrical resistivity, rheological properties and compressive stress-strain behavior of oil well cement modified with silica nanoparticles. Egyptian Journal of Petroleum, 27(4), 1265–1273. https://doi.org/10.1016/j.ejpe.2018.07.001
   Google Scholar
• Mohammed, A., & Mahmood, W. (2018a). Statistical variations and new correlation models to predict the mechanical behavior and ultimate shear strength of gypsum rock. Open Engineering, 8(1), 213–226. https://doi.org/10.1515/eng-2018-0026
   Web of Science ®Google Scholar
• Mohammed, A., & Mahmood, W. (2018b). Vipulanandan failure models to predict the tensile strength, compressive modulus, fracture toughness and ultimate shear strength of calcium rocks. International Journal of Geotechnical Engineering, 15(2) 129–139. https://doi.org/10.1080/19386362.2018.1468663
   Google Scholar
• Mohammed, A., Mahmood, W., & Ghafor, K. (2020a). Shear stress limit, rheological properties and compressive strength of cement-based grout modified with polymers. Journal of Building Pathology and Rehabilitation, 5(1), 3. https://doi.org/10.1007/s41024-019-0069-1
   Google Scholar
• Mohammed, A., Mahmood, W., & Ghafor, K. (2020b). TGA, rheological properties with maximum shear stress and compressive strength of cement-based grout modified with polycarboxylate polymers. Construction and Building Materials, 235, 117534. https://doi.org/10.1016/j.conbuildmat.2019.117534
   Web of Science ®Google Scholar
• Mohammed, A., Rafiq, S., Mahmood, W., Al-Darkazalir, H., Noaman, R., Qadir, W., & Ghafor, K. (2021). Artificial neural network and NLR techniques to predict the rheological properties and compression strength of cement past modified with nanoclay. Ain Shams Engineering Journal, 12(2), 1313–1328. https://doi.org/10.1016/j.asej.2020.07.033
   Web of Science ®Google Scholar
• Mohammed, A., Rafiq, S., Mahmood, W., Noaman, R., Ghafor, K., Qadir, W., & Kadhum, Q. (2020). Characterization and modeling the flow behavior and compression strength of the cement paste modified with silica nano-size at different temperature conditions. Construction and Building Materials, 257, 119590. https://doi.org/10.1016/j.conbuildmat.2020.119590
   Web of Science ®Google Scholar
• Mohammed, A., Rafiq, S., Mahmood, W., Noaman, R., Hind, A. D., Ghafor, K., & Qadir, W. (2020). Microstructure characterizations, thermal properties, yield stress, plastic viscosity and compression strength of cement paste modified with nanosilica. Journal of Materials Research and Technology, 9(5), 10941–10956. https://doi.org/10.1016/j.jmrt.2020.07.083
   Google Scholar
• Mohammed, A., Rafiq, S., Sihag, P., Kurda, R., & Mahmood, W. (2020). Soft computing techniques: Systematic multiscale models to predict the compressive strength of HVFA concrete based on mix proportions and curing times. Journal of Building Engineering, 31, 101851. https://doi.org/10.1016/j.jobe.2020.101851
   Google Scholar
• Mohammed, A., Rafiq, S., Sihag, P., Kurda, R., Mahmood, W., Ghafor, K., & Sarwar, W. (2020). ANN, M5P-tree and nonlinear regression approaches with statistical evaluations to predict the compressive strength of cement-based mortar modified with fly ash. Journal of Materials Research and Technology, 9(6), 12416–12427. https://doi.org/10.1016/j.jmrt.2020.08.083
   Google Scholar
• Mohammed, A., Rafiq, S., Sihag, P., Mahmood, W., Ghafor, K., & Sarwar, W. (2020). ANN, M5P-tree model, and nonlinear regression approaches to predict the compression strength of cement-based mortar modified by quicklime at various water/cement ratios and curing times. Arabian Journal of Geosciences, 13(22), 1–16. https://doi.org/10.1007/s12517-020-06199-5
   Web of Science ®Google Scholar
• Mohammed, A., Salih, A., & Raof, H. (2020). Vipulanandan constitutive models to predict the rheological properties and stress–strain behavior of cement grouts modified with metakaolin. Journal of Testing and Evaluation, 48(5), 20180271. https://doi.org/10.1520/JTE20180271
   Web of Science ®Google Scholar
• Parsajoo, M., Armaghani, D. J., Mohammed, A. S., Khari, M., & Jahandari, S. (2021). Tensile strength prediction of rock material using non-destructive tests: A comparative intelligent study. Transportation Geotechnics, 31, 100652. https://doi.org/10.1016/j.trgeo.2021.100652
   Web of Science ®Google Scholar
• Qadir, W., Ghafor, K., & Mohammed, A. (2019). Characterizing and modeling the mechanical properties of the cement mortar modified with fly ash for various water-to-cement ratios and curing times. Advances in Civil Engineering, 2019, 1–11. https://doi.org/10.1155/2019/7013908
   Web of Science ®Google Scholar
• Sakthieswaran, N., & Sophia, M. (2018). Effect of superplasticizers on the properties of latex modified gypsum plaster. Construction and Building Materials, 179, 675–691. https://doi.org/10.1016/j.conbuildmat.2018.05.150
   Web of Science ®Google Scholar
• Salih, A., Rafiq, S., Mahmood, W., Hind, A. D., Noaman, R., Ghafor, K., & Qadir, W. (2020). Systemic multi-scale approaches to predict the flowability at various temperature and mechanical properties of cement paste modified with nano-calcium carbonate. Construction and Building Materials, 262, 120777. https://doi.org/10.1016/j.conbuildmat.2020.120777
   Web of Science ®Google Scholar
• Sarwar, W., Ghafor, K., & Mohammed, A. (2019). Regression analysis and Vipulanandan model to quantify the effect of polymers on the plastic and hardened properties with the tensile bonding strength of the cement mortar. Results in Materials, 1, 100011. https://doi.org/10.1016/j.rinma.2019.100011
   Google Scholar
• Vipulanandan, C., & Mohammed, A. (2019). Smart cement compressive piezoresistive, stress-strain, and strength behavior with nanosilica modification. Journal of Testing and Evaluation, 47(2), 20170105–20171501. https://doi.org/10.1520/JTE20170105
   Web of Science ®Google Scholar
• Vipulanandan, C., Mohammed, A., & Ganpatye, A. S. (2018, April). Smart cement performance enhancement with NanoAl2O3 for real time monitoring applications using Vipulanandan models [Paper presentation]. In Offshore Technology Conference. https://doi.org/10.4043/28880-MS
   Google Scholar
• Vipulanandan, C., Mohammed, A., & Mahmood, W. (2021, June). Characterizing the hydraulic fracturing fluids with nano-silica proppants for use in sandstone rocks with Vipulanandan models. In 55th US Rock Mechanics/Geomechanics Symposium. OnePetro.
   Google Scholar
• Vipulanandian, C., & Paul, E. (1990). Performance of epoxy and polyester polymer concrete. Materials Journal, 87(3), 241–251.
   Google Scholar