Improvement of shear capacity of RAC beams by adopting identical mortar volume method of mix-design along with dual-stage mixing approach

References

• ACI Committee -318 (2005). Building code requirements for structural concrete (ACI 318-05) and commentary (ACI 318R-05) [Paper presentation]. American Concrete Institute (ACI), Farmington Hills, Michigan, USA.
   Google Scholar
• ACI Committee-211 (1998). Standard practice for selecting proportions for normal, heavyweight and mass concrete (ACI 211.1-91) [Paper presentation].American Concrete Institute (ACI), Farmington Hills, Michigan, USA.
   Google Scholar
• Ataria, R. B., & Wang, Y. C. (2019). Bending and shear behaviour of two layer beams with one layer of rubber recycled aggregate concrete in tension. Structures20, 214–225. https://doi.org/10.1016/j.istruc.2019.03.014
   Google Scholar
• Bažant, Z. P., & Yu, Q. (2005). Designing against size effect on shear strength of reinforced concrete beams without stirrups: I. Formulation. Journal of Structural Engineering131(12), 1877–1885. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:12(1877)
   Web of Science ®Google Scholar
• Behera, M., Bhattacharyya, S. K., Minocha, A. K., Deoliya, R., & Maiti, S. (2014). Recycled aggregate from C&D waste & its use in concrete–A breakthrough towards sustainability in construction sector: A review. Construction and Building Materials68, 501–516. https://doi.org/10.1016/j.conbuildmat.2014.07.003
   Web of Science ®Google Scholar
• BIS (2015). Ordinary Portland cement–Specification (IS: 269). Bureau of Indian Standards (BIS).
   Google Scholar
• BIS (2016). Coarse and fine aggregate for concrete–specification (IS: 383). Bureau of Indian Standards (BIS).
   Google Scholar
• BIS (Bureau of Indian Standards). (2000). Plain and reinforced concrete code of practice. BIS.
   Google Scholar
• Chaboki, H. R., Ghalehnovi, M., Karimipour, A., de Brito, J., & Khatibinia, M. (2019). Shear behaviour of concrete beams with recycled aggregate and steel fibres. Construction and Building Materials204, 809–827. https://doi.org/10.1016/j.conbuildmat.2019.01.130
   Web of Science ®Google Scholar
• Choi, H. B., Yi, C., Cho, H. H., & Kang, K. I. (2010). Experimental study on the shear strength of recycled aggregate concrete beams. Magazine of Concrete Research, 62(2), 103–114. https://doi.org/10.1680/macr.2008.62.2.103
   Web of Science ®Google Scholar
• Danish, A., & Mosaberpanah, M. A. (2021). A review on recycled concrete aggregates (RCA) characteristics to promote RCA utilization in developing sustainable recycled aggregate concrete (RAC). European Journal of Environmental and Civil Engineering 1–35. https://doi.org/10.1080/19648189.2021.1946721
   Google Scholar
• Dean, S. W., Abbas, A., Fathifazl, G., Burkan Isgor, O., Razaqpur, A. G., Fournier, B., & Foo, S. (2008). Proposed method for determining the residual mortar content of recycled concrete aggregates. Journal of ASTM International 5(1), 101087–101012. https://doi.org/10.1520/JAI101087
   Google Scholar
• Ding, X., Qi, J., Fang, W., Chen, M., & Chen, Z. (2020). Improvement on properties of recycled concrete with coarse ceramic vase aggregates using KH-550 surface treating technology. European Journal of Environmental and Civil Engineering 24(1), 1–16. https://doi.org/10.1080/19648189.2017.1363664
   Google Scholar
• Etman, E. E., Afefy, H. M., Baraghith, A. T., & Khedr, S. A. (2018). Improving the shear performance of reinforced concrete beams made of recycled coarse aggregate. Construction and Building Materials 185, 310–324. https://doi.org/10.1016/j.conbuildmat.2018.07.065
   Google Scholar
• European Committee for Standardization (2005). Design of concrete structures. Part 1-1: General rules and rules for buildings (Eurocode 2). British Standard Institution.
   Google Scholar
• Fathifazl, G., Razaqpur, A. G., Isgor, O. B., Abbas, A., Fournier, B., & Foo, S. (2009). Flexural performance of steel-reinforced recycled concrete beams. ACI Structural Journal 106(6)
   Google Scholar
• Fathifazl, G., Razaqpur, A. G., Isgor, O. B., Abbas, A., Fournier, B., & Foo, S. (2009). Shear strength of steel reinforced recycled concrete beams without stirrups. Magazine of Concrete Research 61(7), 387–400. https://doi.org/10.1680/macr.2008.61.7.387
   Google Scholar
• Gastebled, O. J., & May, I. M. (2001). Fracture mechanics model applied to shear failure of reinforced concrete beams without stirrups. ACI Structural Journal 98(2), 184–190.
   Web of Science ®Google Scholar
• Gonzalez-Fonteboa, B., & Martinez-Abella, F. (2007). Shear strength of recycled concrete beams. Construction and Building Materials 21(4), 887–893.
   Web of Science ®Google Scholar
• Guo, Z., Zhang, J., Jiang, T., Jiang, T., Chen, C., Bo, R., & Sun, Y. (2020). Development of sustainable self-compacting concrete using recycled concrete aggregate and fly ash, slag, silica fume. European Journal of Environmental and Civil Engineering, 26, 1–22.
   Google Scholar
• Gupta, S., & Malik, R. K. (2018). The impact of C & D waste on Indian Environment: A critical review. Civil Engineering Research Journal 5(2), 57–63. https://doi.org/10.19080/CERJ.2018.05.555658
   Google Scholar
• Hamad, B. S., Dawi, A. H., Daou, A., & Chehab, G. R. (2018). Studies of the effect of recycled aggregates on flexural, shear, and bond splitting beam structural behavior. Case Studies in Construction Materials 9, e00186. https://doi.org/10.1016/j.cscm.2018.e00186
   Google Scholar
• Ignjatović, I. S., Marinković, S. B., & Tošić, N. (2017). Shear behaviour of recycled aggregate concrete beams with and without shear reinforcement. Engineering Structures 141, 386–401. https://doi.org/10.1016/j.engstruct.2017.03.026
   Google Scholar
• Katkhuda, H., & Shatarat, N. (2016). Shear behavior of reinforced concrete beams using treated recycled concrete aggregate. Construction and Building Materials 125, 63–71. https://doi.org/10.1016/j.conbuildmat.2016.08.034
   Web of Science ®Google Scholar
• Kisku, N., Joshi, H., Ansari, M., Panda, S. K., Nayak, S., & Dutta, S. C. (2017). A critical review and assessment for usage of recycled aggregate as sustainable construction material. Construction and Building Materials 131, 721–740. https://doi.org/10.1016/j.conbuildmat.2016.11.029
   Web of Science ®Google Scholar
• Kisku, N., Rajhans, P., Panda, S. K., Nayak, S., & Pandey, V. (2020). Development of durable concrete from C&D waste by adopting identical mortar volume method in conjunction with two-stage mixing procedure. Construction and Building Materials 256, 119361. https://doi.org/10.1016/j.conbuildmat.2020.119361
   Web of Science ®Google Scholar
• Kisku, N., Rajhans, P., Panda, S. K., Pandey, V., & Nayak, S. (2020). Microstructural investigation of recycled aggregate concrete produced by adopting equal mortar volume method along with two stage mixing approach. Structures 24, 742–753. https://doi.org/10.1016/j.istruc.2020.01.044
   Web of Science ®Google Scholar
• Kou, S. C., Poon, C. S., & Chan, D. (2007). Influence of fly ash as cement replacement on the properties of recycled aggregate concrete. Journal of Materials in Civil Engineering 19(9), 709–717. https://doi.org/10.1061/(ASCE)0899-1561(2007)19:9(709)
   Google Scholar
• Li, W., Xiao, J., Sun, Z., Kawashima, S., & Shah, S. P. (2012). Interfacial transition zones in recycled aggregate concrete with different mixing approaches. Construction and Building Materials 35, 1045–1055. https://doi.org/10.1016/j.conbuildmat.2012.06.022
   Web of Science ®Google Scholar
• Liu, B., Feng, C., & Deng, Z. (2019). Shear behavior of three types of recycled aggregate concrete. Construction and Building Materials 217, 557–572. https://doi.org/10.1016/j.conbuildmat.2019.05.079
   Web of Science ®Google Scholar
• Pradhan, S., Kumar, S., & Barai, S. V. (2018). Shear performance of recycled aggregate concrete beams: An insight for design aspects. Construction and Building Materials 178, 593–611. https://doi.org/10.1016/j.conbuildmat.2018.05.022
   Google Scholar
• Rahal, K. N., & Alrefaei, Y. T. (2018). Shear strength of recycled aggregate concrete beams containing stirrups. Construction and Building Materials 191, 866–876. https://doi.org/10.1016/j.conbuildmat.2018.10.023
   Web of Science ®Google Scholar
• Rajhans, P., Chand, G., Kisku, N., Panda, S. K., & Nayak, S. (2019). Proposed mix design method for producing sustainable self compacting heat cured recycled aggregate concrete and its microstructural investigation. Construction and Building Materials 218, 568–581. https://doi.org/10.1016/j.conbuildmat.2019.05.149
   Google Scholar
• Rajhans, P., Gupta, P. K., Kumar, R. R., Panda, S. K., & Nayak, S. (2019). EMV mix design method for preparing sustainable self compacting recycled aggregate concrete subjected to chloride environment. Construction and Building Materials 199, 705–716. https://doi.org/10.1016/j.conbuildmat.2018.12.079
   Google Scholar
• Rajhans, P., Panda, S. K., & Nayak, S. (2018a). Sustainability on durability of self compacting concrete from C&D waste by improving porosity and hydrated compounds: a microstructural investigation. Construction and Building Materials 174, 559–575. https://doi.org/10.1016/j.conbuildmat.2018.04.137
   Web of Science ®Google Scholar
• Rajhans, P., Panda, S. K., & Nayak, S. (2018b). Sustainable self compacting concrete from C&D waste by improving the microstructures of concrete ITZ. Construction and Building Materials 163, 557–570. https://doi.org/10.1016/j.conbuildmat.2017.12.132
   Web of Science ®Google Scholar
• Seara-Paz, S., Corinaldesi, V., González-Fonteboa, B., & Martínez-Abella, F. (2016). Influence of recycled coarse aggregates characteristics on mechanical properties of structural concrete. European Journal of Environmental and Civil Engineering 20(sup1), S123–S139. https://doi.org/10.1080/19648189.2016.1246694
   Web of Science ®Google Scholar
• Silva, R. V., De Brito, J., & Dhir, R. K. (2017). Availability and processing of recycled aggregates within the construction and demolition supply chain: A review. Journal of Cleaner Production 143, 598–614. https://doi.org/10.1016/j.jclepro.2016.12.070
   Web of Science ®Google Scholar
• Sogo, M., Sogabe, T., Maruyama, I., Sato, R., & Kawai, K. (2004). Shear behavior of reinforced recycled concrete beams [Paper presentation]. Proceedings of the International RILEM Conference on the Use of Recycled Materials in Buildings and Structures, pp.8–11.
   Google Scholar
• Tam, V. W., Gao, X. F., & Tam, C. M. (2005). Microstructural analysis of recycled aggregate concrete produced from two-stage mixing approach. Cement and Concrete Research 35(6), 1195–1203. https://doi.org/10.1016/j.cemconres.2004.10.025
   Web of Science ®Google Scholar
• Zsutty, T. C. (1968). Beam shear strength prediction by analysis of existing data. Journal Proceedings 65(11), 943–951.
   Google Scholar