Behavior of repaired projectile bullet damaged reinforced concrete beams using CFRP sheet in conjunction with natural aggregate or recycled aggregate concrete layer

References

• ACI. (2011). Building code requirements for structural concrete and commentary.
   Google Scholar
• Al Rjoub, Y., Obaidat, A., Ashteyat, A., & Alshboul, K. (2022). Experimental and analytical investigation of using externally bonded, hybrid, fiber-reinforced polymers to repair and strengthen heated, damaged RC beams in flexure. Journal of Structural Fire Engineering, 13(3), 391–417. https://doi.org/10.1108/JSFE-09-2021-0059
   Web of Science ®Google Scholar
• Al-Nimry, H. S., & Al-Rabadi, R. A. (2019). Axial–flexural interaction in FRP-wrapped RC columns. International Journal of Concrete Structures and Materials, 13(1), 1–19. https://doi.org/10.1186/s40069-019-0366-8
   Web of Science ®Google Scholar
• Ashteyat, A. M., Hanandeh, S., & Al-Btoush, A. Y. (2020). Behavior of heat damaged circular reinforced concrete columns repaired using carbon fiber reinforced polymer rope. Journal of Building Engineering, 31, 101424.
   Web of Science ®Google Scholar
• ASTM. (2019). Standard test method for sieve analysis of fine and coarse aggregates. ASTM C136/C136M-19. American Society of Testing and Materials West.
   Google Scholar
• Baena, M., Torres, L., Turon, A., Llorens, M., & Barris, C. (2016). Bond behaviour between recycled aggregate concrete and glass fibre reinforced polymer bars. Construction and Building Materials, 106, 449–460. https://doi.org/10.1016/j.conbuildmat.2015.12.145
   Web of Science ®Google Scholar
• Bairagi, N., Ravande, K., & Pareek, V. (1993). Behaviour of concrete with different proportions of natural and recycled aggregates. Resources, Conservation and Recycling, 9(1–2), 109–126. https://doi.org/10.1016/0921-3449(93)90036-F
   Web of Science ®Google Scholar
• Barham, W. S., Obaidat, Y. T., & Abdelrahman, B. N. (2021). Experimental study on bond behavior between heat-damaged recycled asphalt pavement concrete and NSM-CFRP strips. Case Studies in Construction Materials, 14, e00543. https://doi.org/10.1016/j.cscm.2021.e00543
   Google Scholar
• Carriere, M., Heffernan, P. J., Wight, R. G., & Braimah, A. (2009). Behaviour of steel reinforced polymer (SRP) strengthened RC members under blast load. Canadian Journal of Civil Engineering, 36(8), 1356–1365. https://doi.org/10.1139/L09-053
   Web of Science ®Google Scholar
• Casuccio, M., Torrijos, M. C., Giaccio, G., & Zerbino, R. (2008). Failure mechanism of recycled aggregate concrete. Construction and Building Materials, 22(7), 1500–1506. https://doi.org/10.1016/j.conbuildmat.2007.03.032
   Web of Science ®Google Scholar
• Chen, G. M., He, Y. H., Jiang, T., & Lin, C. J. (2016). Behavior of CFRP-confined recycled aggregate concrete under axial compression. Construction and Building Materials, 111, 85–97. https://doi.org/10.1016/j.conbuildmat.2016.01.054
   Web of Science ®Google Scholar
• de Oliveira, M. B., & Vazquez, E. (1996). The influence of retained moisture in aggregates from recycling on the properties of new hardened concrete. Waste Management, 16(1–3), 113–117. https://doi.org/10.1016/S0956-053X(96)00033-5
   Web of Science ®Google Scholar
• Dixon, D. E. (1991). Standard practice for selecting proportions for normal. Heavyweight, and Mass Concrete (ACI 211.1-91). American Concrete Institute Farmington.
   Google Scholar
• Fonseca, N., Brito, J. D., & Evangelista, L. (2011). The influence of curing conditions on the mechanical performance of concrete made with recycled concrete waste. Cement and Concrete Composites, 33(6), 637–643. https://doi.org/10.1016/j.cemconcomp.2011.04.002
   Web of Science ®Google Scholar
• Jahami, A., Temsah, Y., & Khatib, J. (2019). The efficiency of using CFRP as a strengthening technique for reinforced concrete beams subjected to blast loading. International Journal of Advanced Structural Engineering, 11(4), 411–420. https://doi.org/10.1007/s40091-019-00242-w
   Google Scholar
• Kachlakev, D. I., Green, B. K., & Green, W. A. (2000). Behavior of concrete specimens reinforced with composite materials: Laboratory study. Oregon Department of Transportation.
   Google Scholar
• Kumar, P. S., & Dhinakaran, G. (2012). Effect of admixed recycled aggregate concrete on properties of fresh and hardened concrete. Journal of Materials in Civil Engineering, 24(4), 494–498. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000393
   Web of Science ®Google Scholar
• Lacroix, D., & Doudak, G. (2018). Experimental and analytical investigation of FRP retrofitted glued-laminated beams subjected to simulated blast loading. Journal of Structural Engineering, 144(7), 04018089. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002084
   Web of Science ®Google Scholar
• Lan, S., Lok, T.-S., & Heng, L. (2005). Composite structural panels subjected to explosive loading. Construction and Building Materials, 19(5), 387–395. https://doi.org/10.1016/j.conbuildmat.2004.07.021
   Web of Science ®Google Scholar
• Lee, J.-Y., Shin, H.-O., Min, K.-H., & Yoon, Y.-S. (2018). Flexural assessment of blast-damaged RC beams retrofitted with CFRP sheet and steel fiber. International Journal of Polymer Science, 2018, 1–9. https://doi.org/10.1155/2018/2036436
   Web of Science ®Google Scholar
• Li, J., Wu, C., & Hao, H. (2015). An experimental and numerical study of reinforced ultra-high performance concrete slabs under blast loads. Materials & Design, 82, 64–76. https://doi.org/10.1016/j.matdes.2015.05.045
   Web of Science ®Google Scholar
• Liu, C., Fan, Z., Chen, X., Zhu, C., Wang, H., & Bai, G. (2019). Experimental study on bond behavior between section steel and RAC under full replacement ratio. KSCE Journal of Civil Engineering, 23(3), 1159–1170. https://doi.org/10.1007/s12205-019-0702-1
   Web of Science ®Google Scholar
• Máca, P., Sovják, R., & Konvalinka, P. (2014). Mix design of UHPFRC and its response to projectile impact. International Journal of Impact Engineering, 63, 158–163. https://doi.org/10.1016/j.ijimpeng.2013.08.003
   Web of Science ®Google Scholar
• Matias, D., de Brito, J., Rosa, A., & Pedro, D. (2013). Mechanical properties of concrete produced with recycled coarse aggregates–Influence of the use of superplasticizers. Construction and Building Materials, 44, 101–109. https://doi.org/10.1016/j.conbuildmat.2013.03.011
   Web of Science ®Google Scholar
• Nam, J.-W., Kim, H.-J., Kim, S.-B., Yi, N.-H., & Kim, J.-H J. (2010). Numerical evaluation of the retrofit effectiveness for GFRP retrofitted concrete slab subjected to blast pressure. Composite Structures, 92(5), 1212–1222. https://doi.org/10.1016/j.compstruct.2009.10.031
   Web of Science ®Google Scholar
• Obaidat, A. T., Ashteyat, A. M., Obaidat, Y. T., Al-Btoush, A. Y., & Hanandeh, S. (2021). Experimental and numerical study of strengthening and repairing heat-damaged RC circular column using hybrid system of CFRP. Case Studies in Construction Materials, 15, e00742. https://doi.org/10.1016/j.cscm.2021.e00742
   Google Scholar
• Obaidat, Y. T., Ashteyat, A. M., Taleb Obaidat, A., & Abu-Lebdeh, M. N. (2021). Bond characteristics between concrete and near-surface mounted carbon fiber reinforced polymer cords. Journal of Structural Integrity and Maintenance, 6(4), 223–236. https://doi.org/10.1080/24705314.2021.1950379
   Web of Science ®Google Scholar
• Obaidat, Y. T., Barham, W. S., & Abdelrahman, B. N. (2020). Effect of elevated temperature on the bond behavior between near surface mounted-carbon fiber reinforced polymers strips and recycled aggregate concrete. Construction and Building Materials, 251, 118970. https://doi.org/10.1016/j.conbuildmat.2020.118970
   Web of Science ®Google Scholar
• Obaidat, Y. T., Barham, W. S., Obaidat, A. T., & Attar, K. M. (2021). Behavior of NSM CFRP reinforced concrete columns: Experimental and analytical work. Case Studies in Construction Materials, 15, e00589. https://doi.org/10.1016/j.cscm.2021.e00589
   Google Scholar
• Obaidat, Y. T., Haddad, R. H., & Abdulwahab, M. A. (2018). Innovative strengthening schemes of concrete cantilever beams using CFRP sheets: End anchorage effect. Construction and Building Materials, 190, 1215–1225. https://doi.org/10.1016/j.conbuildmat.2018.09.147
   Web of Science ®Google Scholar
• Obaidat, A. T. (2021). Flexural behavior of reinforced concrete beam using CFRP hybrid system. European Journal of Environmental and Civil Engineering, 26, 1–23. https://doi.org/10.1080/19648189.2021.1934552
   Web of Science ®Google Scholar
• Padmini, A., Ramamurthy, K., & Mathews, M. (2009). Influence of parent concrete on the properties of recycled aggregate concrete. Construction and Building Materials, 23(2), 829–836. https://doi.org/10.1016/j.conbuildmat.2008.03.006
   Web of Science ®Google Scholar
• Pelisser, F., Silva, B. V., Menger, M. H., Frasson, B. J., Keller, T. A., Torii, A. J., & Lopez, R. H. (2018). Structural analysis of composite metakaolin-based geopolymer concrete. Revista IBRACON de Estruturas e Materiais, 11(3), 535–543. https://doi.org/10.1590/s1983-41952018000300006
   Google Scholar
• Reyes-Sánchez, J. A., Tenza-Abril, A. J., & Verdu, F. (2018). Predicting modulus of elasticity of recycled aggregate concrete using nonlinear mathematical models. In Computational and experimental studies (p. 81). WIT Press.
   Google Scholar
• Rezazadeh, M., Cholostiakow, S., Kotynia, R., & Barros, J. (2016). Exploring new NSM reinforcements for the flexural strengthening of RC beams: Experimental and numerical research. Composite Structures, 141, 132–145. https://doi.org/10.1016/j.compstruct.2016.01.033
   Web of Science ®Google Scholar
• Sielicki, P. W., Ślosarczyk, A., & Szulc, D. (2019). Concrete slab fragmentation after bullet impact: An experimental study. International Journal of Protective Structures, 10(3), 380–389. https://doi.org/10.1177/2041419619854764
   Web of Science ®Google Scholar
• Sovjak, R. (2015). Resistance of slim UHPFRC targets to projectile impact using in-service bullets. International Journal of Impact Engineering, 76, 166–177.
   Web of Science ®Google Scholar
• Xiao, J., Li, W., Corr, D. J., & Shah, S. P. (2013). Effects of interfacial transition zones on the stress–strain behavior of modeled recycled aggregate concrete. Cement and Concrete Research, 52, 82–99. https://doi.org/10.1016/j.cemconres.2013.05.004
   Web of Science ®Google Scholar
• Xiao, J., Li, J., & Zhang, C. (2005). Mechanical properties of recycled aggregate concrete under uniaxial loading. Cement and Concrete Research, 35(6), 1187–1194. https://doi.org/10.1016/j.cemconres.2004.09.020
   Web of Science ®Google Scholar