218
Views
0
CrossRef citations to date
0
Altmetric
Original Articles

Experimental investigation on the desiccation cracking process in date palm fiber reinforced clayey soil using digital image correlation

, , , , , & show all
Pages 1141-1162 | Received 22 Nov 2022, Accepted 29 Jul 2023, Published online: 09 Aug 2023

References

  • Al-Oqla, F. M., Salit, M. S., Ishak, R., & Abdul Aziz, N. (2014). Combined multi-criteria evaluation stage technique as an agro waste evaluation indicator for polymeric composites.  Date Palm Fibers as a Case Study, 9, 4608–4621.
  • Auvray, R., Rosin-Paumier, S., Abdallah, A., & Masrouri, F. (2014). Quantification of soft soil cracking during suction cycles by image processing. European Journal of Environmental and Civil Engineering, 18(1), 11–32. https://doi.org/10.1080/19648189.2013.840250
  • Blaber, J., Adair, B., & Antoniou, A. (2015). Ncorr: Open-source 2D digital image correlation Matlab software. Experimental Mechanics, 55(6), 1105–1122. https://doi.org/10.1007/s11340-015-0009-1
  • Chaduvula, U., Manogaran, I., Viswanadham, B. V. S., & Kodikara, J. (2018). Some studies on desiccation cracking of fiber-reinforced expansive clay subjected to drying and wetting cycles. Geotech Spec Publ. 2017 November, 361–370. https://doi.org/10.1061/9780784481707.036
  • Chaduvula, U., Viswanadham, B. V. S., & Kodikara, J. (2017). A study on desiccation cracking behavior of polyester fiber-reinforced expansive clay. Applied Clay Science, 142, 163–172. https://doi.org/10.1016/j.clay.2017.02.008
  • Chebbi, M., Guiras, H., & Jamei, M. (2017). Tensile behaviour analysis of compacted clayey soil reinforced with natural and synthetic fibers : Effect of initial compaction conditions. European Journal of Environmental and Civil Engineering, 8189, 1–27. https://doi.org/10.1080/19648189.2017.1384762
  • Cheng, W.-Q., Yang, Z., Hattab, M., Bian, H., Bouchemella, S., & Fleureau, J.-M. (2021). Free desiccation shrinkage process in clayey soils. European Journal of Environmental and Civil Engineering, 26(13), 6398–6423. https://doi.org/10.1080/19648189.2021.1942223
  • Diambra, A., Russell, A. R., Ibraim, E., & Wood, D. M. (2007). Determination of fibre orientation distribution in reinforced sands. Géotechnique, 57(7), 623–628. https://doi.org/10.1680/geot.2007.57.7.623
  • Eid, J., Taibi, S., Fleureau, J. M., & Hattab, M. (2015). Drying, cracks and shrinkage evolution of a natural silt intended for a new earth building material. Impact of reinforcement. Construction and Building Materials, 86, 120–132. https://doi.org/10.1016/j.conbuildmat.2015.03.115
  • El Hajjar, A., Ouahbi, T., Eid, J., Hattab, M., & Taibi, S. (2020). Shrinkage cracking of unsaturated fine soils: New experimental device and measurement techniques. Strain, 56(6). Portico. https://doi.org/10.1111/str.12352
  • El Hajjar, A., Ouahbi, T., Hamrouni, I., Taibi, S., Eid, J., & Hattab, M. (2022). Experimental characterization of desiccation cracking mechanisms in clayey soils. European Journal of Environmental and Civil Engineering, 0, 1–22. https://doi.org/10.1080/19648189.2022.2136249
  • El Hajjar, A., Ouahbi, T., Taibi, S., Eid, J., Hattab, M., & Fleureau, J. (2021). Assessing crack initiation and propagation in flax fiber reinforced clay subjected to desiccation. Construction and Building Materials, 278, 122392. https://doi.org/10.1016/j.conbuildmat.2021.122392
  • Faiad, A., Alsmari, M., Ahmed, M. M. Z., Bouazizi, M. L., Alzahrani, B., & Alrobei, H. (2022). Date palm tree waste recycling: Treatment and processing for potential engineering applications. Sustainability, 14(3), 1134. https://doi.org/10.3390/su14031134
  • Fayyad, T. M., & Lees, J. M. (2014). Application of digital image correlation to reinforced concrete fracture. Procedia Materials Science, 3, 1585–1590. https://doi.org/10.1016/j.mspro.2014.06.256
  • Gallipoli, D., Bruno, A. W., Perlot, C., & Mendes, J. (2017). A geotechnical perspective of raw earth building. Acta Geotechnica, 12(3), 463–478. https://doi.org/10.1007/s11440-016-0521-1
  • Gowthaman, S., Nakashima, K., & Kawasaki, S. (2018). A state-of-the-art review on soil reinforcement technology using natural plant fiber materials: Past findings, present trends and future directions. Materials, 11(4), 553. https://doi.org/10.3390/ma11040553
  • Gu, K., Lu, Y., Gu, K., Zhang, Y., Tang, C., Shen, Z., & Shi, B. (2021). Impact of biochar on the desiccation cracking behavior of silty clay and its mechanisms. The Science of the Total Environment, 794, 148608. https://doi.org/10.1016/j.scitotenv.2021.148608
  • Gupta, D., & Kumar, A. (2016). Strength Characterization of Cement Stabilized and Fiber Reinforced Clay–Pond Ash Mixes. International Journal of Geosynthetics and Ground Engineering, 2(4). https://doi.org/10.1007/s40891-016-0069-z
  • Hattab, M., Taibi, S., & Fleureau, J. (2021). Mud shrinkage and cracking phenomenon experimental identification. Springer International Publishing. https://doi.org/10.1007/978-3-030-53755-5
  • He, J., Wang, Y., Li, Y., & Ruan, X. C. (2015). Effects of leachate infiltration and desiccation cracks on hydraulic conductivity of compacted clay. Water Science and Engineering, 8(2), 151–157. https://doi.org/10.1016/j.wse.2015.04.004
  • Hillel, D. (1982). Introduction to soil physics. Academic. https://doi.org/10.1016/b978-0-08-091869-3.50013-5
  • Hirose, K., & Matsubara, H. (2018). Mechanisms of mudcrack formation and growth in bentonite paste. Journal of Geotechnical and Geoenvironmental Engineering, 144(4), 04018017. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001853
  • Hun, D. A., Yvonnet, J., Guilleminot, J., Dadda, A., Tang, A. M., & Bornert, M. (2021). Desiccation cracking of heterogeneous clayey soil: Experiments, modeling and simulations. Engineering Fracture Mechanics, 258, 108065. https://doi.org/10.1016/j.engfracmech.2021.108065
  • Kriker, A., Debicki, G., Bali, A., Khenfer, M. M., & Chabannet, M. (2005). Mechanical properties of date palm fibres and concrete reinforced with date palm fibres in hot-dry climate. Cement and Concrete Composites, 27(5), 554–564. https://doi.org/10.1016/j.cemconcomp.2004.09.015
  • Liu, C., Tang, C. S., Shi, B., & Suo, W. B. (2013). Automatic quantification of crack patterns by image processing. Computers & Geosciences, 57, 77–80. https://doi.org/10.1016/j.cageo.2013.04.008
  • Midani, M., Saba, N., & Alothman, O. Y. (2020). Date palm fiber composites. Springer.
  • Miller, C. J., & Rifai, S. (2004). Fiber reinforcement for waste containment soil liners. Journal of Environmental Engineering, 130(8), 891–895. https://doi.org/10.1061/(asce)0733-9372(2004)130:8(891)
  • Miller, C. J., Mi, H., & Yesiller, N. (1998). Experimental analysis of desiccation crack propagation in clay liners 1. Journal of the American Water Resources Association, 34(3), 677–686. https://doi.org/10.1111/j.1752-1688.1998.tb00964.x
  • Morris, P. H., Graham, J., & Williams, D. J. (1992). Cracking in drying soils. Canadian Geotechnical Journal, 29(2), 263–277. https://doi.org/10.1139/t92-030
  • Nahlawi, H., & Kodikara, J. K. (2006). Laboratory experiments on desiccation cracking of thin soil layers. Geotechnical and Geological Engineering, 24(6), 1641–1664. https://doi.org/10.1007/s10706-005-4894-4
  • NF P94-051. (1993). Détermination des limites d’Atterberg. Limite de liquidité à la coupelle—Limite de plasticité au rouleau.
  • NF P94-054. (1991). Sols: reconnaissance et essais–Détermination de la masse volumique des particules solides des sols – Méthode du pycnomètre à eau.
  • NF P94-056. (1996). Analyse granulométrique – Méthode par tamisage à sec après lavage.
  • NF P94-057. (1992). Analyse granulométrique des sols – Méthode par sédimentation.
  • Pan, B., Qian, K., Xie, H., & Asundi, A. (2009). Two-dimensional digital image correlation for in-plane displacement and strain measurement: A review. Measurement Science and Technology, 20(6), 062001. https://doi.org/10.1088/0957-0233/20/6/062001
  • Pan, B., Xie, H., & Wang, Z. (2010). Equivalence of digital image correlation criteria for pattern matching. Applied Optics, 49(28), 5501–5509. https://doi.org/10.1364/AO.49.005501
  • Peron, H., Laloui, L., Hu, L. B., & Hueckel, T. (2013). Formation of drying crack patterns in soils: A deterministic approach. Acta Geotechnica, 8(2), 215–221. https://doi.org/10.1007/s11440-012-0184-5
  • Poncelet, N., & François, B. (2019). Desiccation crack in lime-treated silty clay: Experimental evaluation and constitutive interpretation. E3S Web of Conferences, 92, 11002. https://doi.org/10.1051/e3sconf/20199211002
  • Prat, P. C., Ledesma, A., & Lakshmikantha, M. R. (2006). Size effect in the cracking of drying soil. In Fracture of nano and engineering materials and structures – Proceedings of the 16th European Conference of Fracture (pp. 1373–1374). Springer. https://doi.org/10.1007/1-4020-4972-2_682
  • Satyanarayana, K. G., Arizaga, G. G. C., & Wypych, F. (2009). Biodegradable composites based on lignocellulosic fibers – An overview. Progress in Polymer Science, 34(9), 982–1021. https://doi.org/10.1016/j.progpolymsci.2008.12.002
  • Sivakumar Babu, G. L., & Vasudevan, A. K. (2008). Strength and stiffness response of coir fiber-reinforced tropical soil. Journal of Materials in Civil Engineering, 20(9), 571–577. https://doi.org/10.1061/(asce)0899-1561(2008)20:9(571)
  • Tang, C. S., Shi, B., Cui, Y. J., Liu, C., & Gu, K. (2012). Desiccation cracking behavior of polypropylene fiber-reinforced clayey soil. Canadian Geotechnical Journal, 49(9), 1088–1101. https://doi.org/10.1139/t2012-067
  • Tang, C. S., Shi, B., Liu, C., Gao, L., & Inyang, H. I. (2011a). Experimental investigation of the desiccation cracking behavior of soil layers during drying. Journal of Materials in Civil Engineering, 23(6), 873–878. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000242
  • Tang, C. S., Shi, B., Liu, C., Suo, W. B., & Gao, L. (2011b). Experimental characterization of shrinkage and desiccation cracking in thin clay layer. Applied Clay Science, 52(1-2), 69–77. https://doi.org/10.1016/j.clay.2011.01.032
  • Tang, C.-S., Wang, D.-Y., Cui, Y.-J., Shi, B., & Li, J. (2016). Tensile Strength of Fiber-Reinforced Soil. Journal of Materials in Civil Engineering, 28(7). https://doi.org/10.1061/(asce)mt.1943-5533.0001546
  • Tang, C., Shi, B., Liu, C., Zhao, L., & Wang, B. (2008). Influencing factors of geometrical structure of surface shrinkage cracks in clayey soils. Engineering Geology, 101(3-4), 204–217. https://doi.org/10.1016/j.enggeo.2008.05.005
  • Tang, C.-S., Zhu, C., Cheng, Q., Zeng, H., Xu, J.-J., Tian, B.-G., & Shi, B. (2021). Desiccation cracking of soils : A review of investigation approaches, underlying mechanisms, and influencing factors. Earth-Science Reviews, 216, 103586. https://doi.org/10.1016/j.earscirev.2021.103586
  • Tollenaar, R. N., van Paassen, L. A., & Jommi, C. (2017). Observations on the desiccation and cracking of clay layers. Engineering Geology, 230, 23–31. https://doi.org/10.1016/j.enggeo.2017.08.022
  • Wang, L. L., Tang, C. S., Shi, B., Cui, Y. J., Zhang, G. Q., & Hilary, I. (2018). Nucleation and propagation mechanisms of soil desiccation cracks. Engineering Geology, 238, 27–35. https://doi.org/10.1016/j.enggeo.2018.03.004
  • Wei, X., Hattab, M., Fleureau, J. M., & Hu, R. (2013). Micro-macro-experimental study of two clayey materials on drying paths. Bulletin of Engineering Geology and the Environment, 72(3-4), 495–508. https://doi.org/10.1007/s10064-013-0513-4
  • Weinberger, R. (1999). Initiation and growth of cracks during desiccation of stratified muddy sediments. Journal of Structural Geology, 21(4), 379–386. https://doi.org/10.1016/S0191-8141(99)00029-2
  • Wilson, G. W., Fredlund, D. G., & Barbour, S. L. (1994). Coupled soil-atmosphere modelling for soil evaporation. Canadian Geotechnical Journal, 31(2), 151–161. https://doi.org/10.1139/t94-021
  • Xu, Y., Yao, X., Zhuang, Y., Duan, W., Zhang, X., Hu, S., & Dong, X. (2021). The Effects of Fiber Inclusion on the Evolution of Desiccation Cracking in Soil-Cement. Materials, 14(17), 4974. https://doi.org/10.3390/ma14174974
  • Yuan, S., Yang, B., Liu, J., & Cao, B. (2021). Influence of fibers on desiccation cracks in sodic soil. Bulletin of Engineering Geology and the Environment, 80(4), 3207–3216. https://doi.org/10.1007/s10064-021-02123-7

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.